Skip to content

Lesson 3/10 · 15 words · 0 learned

Workshop safety

  1. 1

    safety glasses(noun)

    /ˈseɪfti ɡlɑːsɪz/

    strong protective glasses that protect the eyes from flying chips, sparks and dust

    Safety glasses must be worn at all times on the shop floor.

    A metal chip hit his safety glasses while he was grinding.

    Synonymssafety gogglesprotective eyeweareye protection
    Antonymsordinary glassesregular glassesnon-protective eyewear
  2. 2

    hazard(noun)

    /ˈhæzərd/

    anything in the workplace that could cause injury, illness or damage

    Oil on the floor is a slip hazard and must be cleaned at once.

    The team identified three hazards during the walk around the workshop.

    Synonymsdangerriskperilthreatjeopardypitfall
    Antonymssafetysecurityprotectioncertainty
  3. 3

    near miss(noun)

    /nɪr mɪs/

    an event that could have caused injury or damage but did not, which should still be reported

    Please report every near miss, even if nobody was hurt.

    A falling clamp was recorded as a near miss in the safety log.

    Synonymsclose callnarrow escapeclose shavebrush with danger
    Antonymscollisionhitaccident
  4. 4

    PPE(abbreviation)

    /ˌpiː piː ˈiː/

    personal protective equipment: gloves, masks, gowns and other items that protect health workers from infection

    Staff must wear full PPE when caring for patients with tuberculosis.

    Remove PPE carefully to avoid contaminating your hands.

    Synonymsprotective gearsafety equipment
    Antonymsunprotectedexposed
  5. 5

    forklift(noun)

    /fɔːrklɪft/

    a small vehicle with two metal arms at the front for lifting and moving heavy loads

    A forklift unloaded the pallets from the truck.

    Only trained staff may drive a forklift in the warehouse.

    Synonymslift truckfork truck
    AntonymsNone
  6. 6

    lockout/tagout(noun)

    /lɑːkaʊt/ˈtæɡaʊt/

    a safety procedure where a machine's energy sources are switched off, locked and tagged before maintenance work

    Apply lockout/tagout before you put your hands inside the machine.

    Every maintenance technician has a personal lock for lockout/tagout.

    SynonymsControl of Hazardous EnergyEnergy Isolation
    AntonymsActivationEnergization
  7. 7

    risk assessment(noun)

    /rɪsk əˈsɛsmənt/

    a careful check of a task or workplace to find hazards, judge how serious they are and decide controls

    A risk assessment is needed before any work at height on the machine.

    The supervisor updated the risk assessment after the new press was installed.

    SynonymsHazard analysisRisk analysisThreat assessment
    AntonymsNeglectIgnoring risks
  8. 8

    safety data sheet(noun)

    /ˈseɪfti ˌdeɪtə ʃiːt/

    a document giving the hazards, safe handling and emergency measures for a chemical product

    The forwarder asked for the safety data sheet before booking the chemicals.

    The safety data sheet confirmed the product is not hazardous for transport.

  9. 9

    hearing protection(noun)

    /ˈhɪərɪŋ prəˌtekʃn/

    earplugs or earmuffs that protect workers from damage caused by loud noise

    Hearing protection is required near the press when it is running.

    The noise survey showed that the grinding area needs hearing protection.

  10. 10

    safety shoes(noun)

    /ˈseɪfti ʃuːz/

    strong work shoes with a steel or composite toe cap to protect the feet from falling objects

    Visitors must wear safety shoes in the production area.

    His safety shoes protected his toes when the casting fell.

  11. 11

    machine guard(noun)

    /məˈʃiːn ɡɑːd/

    a cover or barrier that stops people touching the moving or dangerous parts of a machine

    The lathe will not start unless the machine guard is closed.

    Never run a machine with the machine guard removed.

  12. 12

    emergency stop(noun)

    /ɪˈmɜːdʒənsi stɒp/

    a large red button or switch that stops a machine immediately in a dangerous situation

    He pressed the emergency stop when the operator's sleeve got caught.

    Test every emergency stop on the line at the start of each week.

  13. 13

    pinch point(noun)

    /ˈpɪntʃ pɔɪnt/

    a place on a machine where a body part can be caught between moving parts or between a moving and a fixed part

    Yellow labels mark every pinch point on the conveyor.

    Keep your fingers clear of the pinch point between the rollers.

  14. 14

    hot work(noun)

    /ˈhɒt wɜːk/

    work such as welding, cutting or grinding that produces flames, sparks or heat and can start a fire

    You need a hot work permit to weld near the paint store.

    A fire watch must stay for an hour after hot work finishes.

  15. 15

    overhead crane(noun)

    /ˌəʊvəhed ˈkreɪn/

    a crane that runs on rails near the ceiling of a factory to lift and move heavy loads

    Only trained staff may operate the overhead crane.

    The 5-tonne overhead crane lifted the gearbox onto the test bench.