본문으로 건너뛰기

레슨 3/10 · 15단어 · 외운 단어 0

Workshop safety

작업장 안전

  1. 1

    safety glasses(noun)

    /ˈseɪfti ɡlɑːsɪz/

    보안경, 안전 안경

    strong protective glasses that protect the eyes from flying chips, sparks and dust

    Safety glasses must be worn at all times on the shop floor.

    작업 현장에서는 항상 보안경을 착용해야 한다.

    A metal chip hit his safety glasses while he was grinding.

    유의어safety gogglesprotective eyeweareye protection
    반의어ordinary glassesregular glassesnon-protective eyewear
  2. 2

    hazard(noun)

    /ˈhæzərd/

    위험 요인, 유해·위험 요소

    anything in the workplace that could cause injury, illness or damage

    Oil on the floor is a slip hazard and must be cleaned at once.

    바닥의 기름은 미끄러짐 위험 요인이므로 즉시 닦아내야 한다.

    The team identified three hazards during the walk around the workshop.

    유의어dangerriskperilthreatjeopardypitfall
    반의어safetysecurityprotectioncertainty
  3. 3

    near miss(noun)

    /nɪr mɪs/

    아차 사고, 근접 사고

    an event that could have caused injury or damage but did not, which should still be reported

    Please report every near miss, even if nobody was hurt.

    아무도 다치지 않았더라도 모든 아차 사고를 보고해 주십시오.

    A falling clamp was recorded as a near miss in the safety log.

    유의어close callnarrow escapeclose shavebrush with danger
    반의어collisionhitaccident
  4. 4

    PPE(abbreviation)

    /ˌpiː piː ˈiː/

    개인보호구, 개인 보호 장비

    personal protective equipment: gloves, masks, gowns and other items that protect health workers from infection

    Staff must wear full PPE when caring for patients with tuberculosis.

    결핵 환자를 돌볼 때 직원은 반드시 개인보호구를 완전히 착용해야 한다.

    Remove PPE carefully to avoid contaminating your hands.

    유의어protective gearsafety equipment
    반의어unprotectedexposed
  5. 5

    forklift(noun)

    /fɔːrklɪft/

    지게차

    a small vehicle with two metal arms at the front for lifting and moving heavy loads

    A forklift unloaded the pallets from the truck.

    지게차가 트럭에서 팔레트를 내렸다.

    Only trained staff may drive a forklift in the warehouse.

    유의어lift truckfork truck
    반의어None
  6. 6

    lockout/tagout(noun)

    /lɑːkaʊt/ˈtæɡaʊt/

    잠금장치 및 표지 부착, 로토(LOTO)

    a safety procedure where a machine's energy sources are switched off, locked and tagged before maintenance work

    Apply lockout/tagout before you put your hands inside the machine.

    기계 안에 손을 넣기 전에 잠금장치 및 표지 부착(LOTO)을 실시하십시오.

    Every maintenance technician has a personal lock for lockout/tagout.

    유의어Control of Hazardous EnergyEnergy Isolation
    반의어ActivationEnergization
  7. 7

    risk assessment(noun)

    /rɪsk əˈsɛsmənt/

    위험성 평가, 리스크 평가

    a careful check of a task or workplace to find hazards, judge how serious they are and decide controls

    A risk assessment is needed before any work at height on the machine.

    기계에서 고소 작업을 하기 전에는 위험성 평가가 필요하다.

    The supervisor updated the risk assessment after the new press was installed.

    유의어Hazard analysisRisk analysisThreat assessment
    반의어NeglectIgnoring risks
  8. 8

    safety data sheet(noun)

    /ˈseɪfti ˌdeɪtə ʃiːt/

    물질안전보건자료, MSDS

    a document giving the hazards, safe handling and emergency measures for a chemical product

    The forwarder asked for the safety data sheet before booking the chemicals.

    포워더는 화학물질을 부킹하기 전에 물질안전보건자료를 요청했다.

    The safety data sheet confirmed the product is not hazardous for transport.

  9. 9

    hearing protection(noun)

    /ˈhɪərɪŋ prəˌtekʃn/

    청력 보호구, 귀마개

    earplugs or earmuffs that protect workers from damage caused by loud noise

    Hearing protection is required near the press when it is running.

    프레스가 가동 중일 때는 근처에서 청력 보호구를 착용해야 한다.

    The noise survey showed that the grinding area needs hearing protection.

  10. 10

    safety shoes(noun)

    /ˈseɪfti ʃuːz/

    안전화

    strong work shoes with a steel or composite toe cap to protect the feet from falling objects

    Visitors must wear safety shoes in the production area.

    방문객은 생산 구역에서 안전화를 착용해야 한다.

    His safety shoes protected his toes when the casting fell.

  11. 11

    machine guard(noun)

    /məˈʃiːn ɡɑːd/

    방호장치, 안전덮개, 기계 가드

    a cover or barrier that stops people touching the moving or dangerous parts of a machine

    The lathe will not start unless the machine guard is closed.

    방호장치가 닫혀 있지 않으면 선반이 작동하지 않는다.

    Never run a machine with the machine guard removed.

  12. 12

    emergency stop(noun)

    /ɪˈmɜːdʒənsi stɒp/

    비상정지, 비상정지 버튼

    a large red button or switch that stops a machine immediately in a dangerous situation

    He pressed the emergency stop when the operator's sleeve got caught.

    작업자의 소매가 끼이자 그는 비상정지 버튼을 눌렀다.

    Test every emergency stop on the line at the start of each week.

  13. 13

    pinch point(noun)

    /ˈpɪntʃ pɔɪnt/

    끼임점, 협착점

    a place on a machine where a body part can be caught between moving parts or between a moving and a fixed part

    Yellow labels mark every pinch point on the conveyor.

    컨베이어의 모든 끼임점에는 노란색 라벨이 붙어 있다.

    Keep your fingers clear of the pinch point between the rollers.

  14. 14

    hot work(noun)

    /ˈhɒt wɜːk/

    화기작업, 용접·용단 작업

    work such as welding, cutting or grinding that produces flames, sparks or heat and can start a fire

    You need a hot work permit to weld near the paint store.

    도료 보관소 근처에서 용접하려면 화기작업 허가서가 필요하다.

    A fire watch must stay for an hour after hot work finishes.

  15. 15

    overhead crane(noun)

    /ˌəʊvəhed ˈkreɪn/

    천장크레인, 오버헤드 크레인

    a crane that runs on rails near the ceiling of a factory to lift and move heavy loads

    Only trained staff may operate the overhead crane.

    교육을 받은 직원만 천장크레인을 조작할 수 있다.

    The 5-tonne overhead crane lifted the gearbox onto the test bench.