Lumaktaw sa nilalaman

Aralin 3/10 · 15 salita · 0 natutunan

Workshop safety

Kaligtasan sa talyer

  1. 1

    safety glasses(noun)

    /ˈseɪfti ɡlɑːsɪz/

    salaming pangkaligtasan, salaming pananggalang

    strong protective glasses that protect the eyes from flying chips, sparks and dust

    Safety glasses must be worn at all times on the shop floor.

    Dapat laging magsuot ng salaming pangkaligtasan sa sahig ng pagawaan.

    A metal chip hit his safety glasses while he was grinding.

    Kasingkahulugansafety gogglesprotective eyeweareye protection
    Kasalungatordinary glassesregular glassesnon-protective eyewear
  2. 2

    hazard(noun)

    /ˈhæzərd/

    panganib, peligro

    anything in the workplace that could cause injury, illness or damage

    Oil on the floor is a slip hazard and must be cleaned at once.

    Ang langis sa sahig ay panganib na madulas at dapat linisin kaagad.

    The team identified three hazards during the walk around the workshop.

    Kasingkahulugandangerriskperilthreatjeopardypitfall
    Kasalungatsafetysecurityprotectioncertainty
  3. 3

    near miss(noun)

    /nɪr mɪs/

    muntik nang aksidente, near miss

    an event that could have caused injury or damage but did not, which should still be reported

    Please report every near miss, even if nobody was hurt.

    Pakiulat ang bawat muntik nang aksidente, kahit walang nasaktan.

    A falling clamp was recorded as a near miss in the safety log.

    Kasingkahuluganclose callnarrow escapeclose shavebrush with danger
    Kasalungatcollisionhitaccident
  4. 4

    PPE(abbreviation)

    /ˌpiː piː ˈiː/

    PPE, kagamitang pamproteksyon sa sarili

    personal protective equipment: gloves, masks, gowns and other items that protect health workers from infection

    Staff must wear full PPE when caring for patients with tuberculosis.

    Dapat magsuot ng kumpletong PPE ang mga kawani kapag nag-aalaga ng mga pasyenteng may tuberkulosis.

    Remove PPE carefully to avoid contaminating your hands.

    Kasingkahuluganprotective gearsafety equipment
    Kasalungatunprotectedexposed
  5. 5

    forklift(noun)

    /fɔːrklɪft/

    forklift, pang-angat na sasakyan

    a small vehicle with two metal arms at the front for lifting and moving heavy loads

    A forklift unloaded the pallets from the truck.

    Ibinaba ng isang forklift ang mga pallet mula sa trak.

    Only trained staff may drive a forklift in the warehouse.

    Kasingkahuluganlift truckfork truck
    KasalungatNone
  6. 6

    lockout/tagout(noun)

    /lɑːkaʊt/ˈtæɡaʊt/

    lockout/tagout, LOTO, pagkandado at pagtatak

    a safety procedure where a machine's energy sources are switched off, locked and tagged before maintenance work

    Apply lockout/tagout before you put your hands inside the machine.

    Isagawa ang lockout/tagout bago ipasok ang iyong mga kamay sa loob ng makina.

    Every maintenance technician has a personal lock for lockout/tagout.

    KasingkahuluganControl of Hazardous EnergyEnergy Isolation
    KasalungatActivationEnergization
  7. 7

    risk assessment(noun)

    /rɪsk əˈsɛsmənt/

    pagtatasa ng panganib, pagsusuri ng panganib

    a careful check of a task or workplace to find hazards, judge how serious they are and decide controls

    A risk assessment is needed before any work at height on the machine.

    Kailangan ng pagtatasa ng panganib bago ang anumang trabaho sa mataas na lugar sa makina.

    The supervisor updated the risk assessment after the new press was installed.

    KasingkahuluganHazard analysisRisk analysisThreat assessment
    KasalungatNeglectIgnoring risks
  8. 8

    safety data sheet(noun)

    /ˈseɪfti ˌdeɪtə ʃiːt/

    safety data sheet, sheet ng datos pangkaligtasan

    a document giving the hazards, safe handling and emergency measures for a chemical product

    The forwarder asked for the safety data sheet before booking the chemicals.

    Hiniling ng forwarder ang safety data sheet bago i-book ang mga kemikal.

    The safety data sheet confirmed the product is not hazardous for transport.

  9. 9

    hearing protection(noun)

    /ˈhɪərɪŋ prəˌtekʃn/

    proteksyon sa pandinig, earplug, earmuff

    earplugs or earmuffs that protect workers from damage caused by loud noise

    Hearing protection is required near the press when it is running.

    Kinakailangan ang proteksyon sa pandinig malapit sa press kapag ito ay tumatakbo.

    The noise survey showed that the grinding area needs hearing protection.

  10. 10

    safety shoes(noun)

    /ˈseɪfti ʃuːz/

    sapatos pangkaligtasan, safety shoes

    strong work shoes with a steel or composite toe cap to protect the feet from falling objects

    Visitors must wear safety shoes in the production area.

    Dapat magsuot ng sapatos pangkaligtasan ang mga bisita sa lugar ng produksyon.

    His safety shoes protected his toes when the casting fell.

  11. 11

    machine guard(noun)

    /məˈʃiːn ɡɑːd/

    pananggalang ng makina, panangga ng makina

    a cover or barrier that stops people touching the moving or dangerous parts of a machine

    The lathe will not start unless the machine guard is closed.

    Hindi magsisimula ang lathe maliban kung nakasara ang pananggalang ng makina.

    Never run a machine with the machine guard removed.

  12. 12

    emergency stop(noun)

    /ɪˈmɜːdʒənsi stɒp/

    pang-emerhensiyang pagtigil, pindutang pantigil sa emerhensiya

    a large red button or switch that stops a machine immediately in a dangerous situation

    He pressed the emergency stop when the operator's sleeve got caught.

    Pinindot niya ang pindutang pantigil sa emerhensiya nang maipit ang manggas ng operator.

    Test every emergency stop on the line at the start of each week.

  13. 13

    pinch point(noun)

    /ˈpɪntʃ pɔɪnt/

    puntong maiipitan, lugar na maiipitan

    a place on a machine where a body part can be caught between moving parts or between a moving and a fixed part

    Yellow labels mark every pinch point on the conveyor.

    Minarkahan ng dilaw na label ang bawat puntong maiipitan sa conveyor.

    Keep your fingers clear of the pinch point between the rollers.

  14. 14

    hot work(noun)

    /ˈhɒt wɜːk/

    mainit na gawain, gawaing may apoy at init

    work such as welding, cutting or grinding that produces flames, sparks or heat and can start a fire

    You need a hot work permit to weld near the paint store.

    Kailangan mo ng permit para sa mainit na gawain upang magwelding malapit sa imbakan ng pintura.

    A fire watch must stay for an hour after hot work finishes.

  15. 15

    overhead crane(noun)

    /ˌəʊvəhed ˈkreɪn/

    kreyn na nasa itaas, kreyn sa kisame

    a crane that runs on rails near the ceiling of a factory to lift and move heavy loads

    Only trained staff may operate the overhead crane.

    Mga sinanay na tauhan lamang ang maaaring magpatakbo ng kreyn na nasa itaas.

    The 5-tonne overhead crane lifted the gearbox onto the test bench.