ข้ามไปยังเนื้อหา

บทที่ 5/10 · 17 คำ · จำได้แล้ว 0

Electronic components and PCBs

อุปกรณ์อิเล็กทรอนิกส์และแผงวงจรพิมพ์

  1. 1

    diode(noun)

    /ˈdaɪəʊd/

    ไดโอด

    a semiconductor component that allows current to flow in one direction only

    Fit a diode across the relay coil to protect the transistor.

    ให้ต่อไดโอดคร่อมขดลวดรีเลย์เพื่อป้องกันทรานซิสเตอร์

    Use the diode test function on the multimeter to check it.

    คำพ้องความหมายrectifiersemiconductor diode
  2. 2

    resistor(noun)

    /rɪˈzɪstər/

    ตัวต้านทาน, รีซิสเตอร์

    a component that limits the current in a circuit by providing a fixed amount of resistance

    Read the colour bands to find the value of the resistor.

    ให้อ่านแถบสีเพื่อหาค่าของตัวต้านทาน

    Add a resistor in series to limit the current through the LED.

    คำพ้องความหมายresistanceelectrical resistor
    คำตรงข้ามconductorsuperconductor
  3. 3

    semiconductor(noun)

    /ˈsemikəndʌktər/

    สารกึ่งตัวนำ, อุปกรณ์สารกึ่งตัวนำ

    a material such as silicon that conducts electricity only under certain conditions, used to make diodes, transistors and chips

    Silicon is the most widely used semiconductor in electronics.

    ซิลิคอนเป็นสารกึ่งตัวนำที่ใช้กันอย่างแพร่หลายที่สุดในอุปกรณ์อิเล็กทรอนิกส์

    Heat is the main enemy of semiconductor devices in power equipment.

    คำพ้องความหมายsolid-state devicemicrochip
    คำตรงข้ามconductorinsulator
  4. 4

    solder(noun)

    /ˈsɑːdər/

    ตะกั่วบัดกรี, โลหะบัดกรี

    a soft metal alloy that is melted to join wires and component leads electrically

    A cracked solder joint caused the display to flicker.

    รอยบัดกรีที่แตกร้าวทำให้หน้าจอกะพริบ

    We switched to lead-free solder to meet export rules.

    คำพ้องความหมายbrazeweldfusejoin
    คำตรงข้ามdisconnectseparatedetach
  5. 5

    transistor(noun)

    /trænˈzɪstər/

    ทรานซิสเตอร์

    a semiconductor component used to switch or amplify electrical signals

    The output transistor switches the relay coil on and off.

    ทรานซิสเตอร์ขาออกทำหน้าที่เปิดและปิดขดลวดรีเลย์

    A shorted transistor was found on the driver board.

    คำพ้องความหมายsemiconductoramplifierelectronic component
    คำตรงข้ามvacuum tuberesistorcapacitor
  6. 6

    capacitor(noun)

    /kəˈpæsɪtər/

    ตัวเก็บประจุ, คาปาซิเตอร์

    a component that stores electrical charge for a short time and releases it, used for filtering and timing

    The power supply failed because an electrolytic capacitor had dried out.

    แหล่งจ่ายไฟเสียเพราะตัวเก็บประจุแบบอิเล็กโทรไลต์แห้ง

    Always discharge large capacitors before touching the circuit board.

    คำพ้องความหมายcondenserelectrical storage device
    คำตรงข้ามresistorinductor
  7. 7

    inductor(noun)

    /ɪnˈdʌktə(r)/

    ตัวเหนี่ยวนำ, ขดลวดเหนี่ยวนำ

    a coil of wire that stores energy in a magnetic field and resists changes in current

    The inductor in the filter blocks high-frequency noise.

    ตัวเหนี่ยวนำในวงจรกรองช่วยกั้นสัญญาณรบกวนความถี่สูง

    A small inductor smooths the output current of the converter.

  8. 8

    LED(abbreviation)

    /ˌel iː ˈdiː/

    ไดโอดเปล่งแสง, แอลอีดี

    light-emitting diode: a semiconductor component that gives out light when current passes through it

    The green LED on the module shows that power is on.

    ไฟ LED สีเขียวบนโมดูลแสดงว่ามีไฟเข้าอยู่

    Replacing the old lamps with LED fittings cut lighting costs by half.

  9. 9

    integrated circuit(noun)

    /ˌɪntɪɡreɪtɪd ˈsɜːkɪt/

    วงจรรวม, ไอซี

    a small chip containing many electronic components such as transistors and resistors, built as one unit

    The timer function is handled by a single integrated circuit.

    ฟังก์ชันตั้งเวลาควบคุมโดยวงจรรวมเพียงตัวเดียว

    Handle each integrated circuit carefully to avoid static damage.

  10. 10

    voltage regulator(noun)

    /ˈvəʊltɪdʒ ˌreɡjuleɪtə(r)/

    ตัวควบคุมแรงดันไฟฟ้า, เรกูเลเตอร์

    a component or circuit that keeps the output voltage steady even when the input or load changes

    A 5 volt voltage regulator supplies the logic part of the board.

    ตัวควบคุมแรงดันไฟฟ้า 5 โวลต์จ่ายไฟให้ส่วนลอจิกของแผงวงจร

    The voltage regulator was very hot because the input voltage was too high.

  11. 11

    potentiometer(noun)

    /pəˌtenʃiˈɒmɪtə(r)/

    โพเทนชิออมิเตอร์, ตัวต้านทานปรับค่าได้

    a variable resistor with a knob or screw used to adjust voltage or settings in a circuit

    Turn the potentiometer slowly to adjust the motor speed.

    ค่อย ๆ หมุนโพเทนชิออมิเตอร์เพื่อปรับความเร็วมอเตอร์

    The sensor sensitivity is set with a small potentiometer on the board.

  12. 12

    PCB(abbreviation)

    /ˌpiː siː ˈbiː/

    แผ่นวงจรพิมพ์, แผงวงจรพิมพ์, PCB

    printed circuit board: a flat board with copper tracks that holds and connects electronic components

    The PCB was cracked near the connector after the unit was dropped.

    แผ่น PCB แตกร้าวบริเวณใกล้ขั้วต่อหลังจากเครื่องตกพื้น

    Our factory does PCB assembly for several electronics brands.

  13. 13

    trace(noun)

    /treɪs/

    ลายวงจร, เส้นลายทองแดง

    a thin copper line on a printed circuit board that connects components electrically

    A burnt trace on the board was repaired with a short wire.

    ลายวงจรที่ไหม้บนแผงถูกซ่อมด้วยลวดเส้นสั้น ๆ

    Make the power traces wider so they can carry more current.

  14. 14

    SMD(abbreviation)

    /ˌes em ˈdiː/

    SMD, อุปกรณ์ติดตั้งบนพื้นผิว

    surface-mount device: a small component soldered directly onto the surface of a circuit board, without wire leads through holes

    SMD parts are placed on the board by a pick-and-place machine.

    ชิ้นส่วน SMD ถูกวางลงบนแผงวงจรด้วยเครื่องวางชิ้นส่วนอัตโนมัติ

    Replacing an SMD capacitor by hand needs a fine soldering tip.

  15. 15

    through-hole(adjective)

    /ˈθruː həʊl/

    แบบเสียบรู, แบบขาเสียบผ่านรู

    describing components whose wire leads go through holes in a circuit board and are soldered on the other side

    Large connectors are still through-hole parts for extra strength.

    ขั้วต่อขนาดใหญ่ยังคงเป็นชิ้นส่วนแบบเสียบรูเพื่อความแข็งแรงที่มากขึ้น

    Through-hole components are easier to replace during field repairs.

  16. 16

    soldering iron(noun)

    /ˈsəʊldərɪŋ ˌaɪən/

    หัวแร้งบัดกรี, หัวแร้ง

    a hand tool with a hot metal tip used to melt solder and join components

    Set the soldering iron to about 350 degrees for this work.

    ตั้งอุณหภูมิหัวแร้งไว้ที่ประมาณ 350 องศาสำหรับงานนี้

    Clean the soldering iron tip on a damp sponge between joints.

  17. 17

    heat sink(noun)

    /ˈhiːt sɪŋk/

    แผ่นระบายความร้อน, ครีบระบายความร้อน

    a metal part with fins attached to a component to carry heat away and keep it cool

    Apply thermal paste before fixing the transistor to the heat sink.

    ทาซิลิโคนนำความร้อนก่อนยึดทรานซิสเตอร์เข้ากับแผ่นระบายความร้อน

    Dust on the heat sink made the drive shut down from overheating.