본문으로 건너뛰기

레슨 2/10 · 15단어 · 외운 단어 0

Hand and power tools

수공구와 전동 공구

  1. 1

    pliers(noun)

    /ˈplaɪərz/

    펜치, 플라이어

    a hand tool with two handles and jaws, used for gripping, bending or cutting wire and small parts

    Use long-nose pliers to fit the spring into the narrow slot.

    좁은 홈에 스프링을 끼울 때는 롱노즈 펜치를 사용하십시오.

    He cut the locking wire with a pair of pliers.

    유의어nipperstweezers (depending on the type)
    반의어none (Pliers are a specific tool with no direct opposite)
  2. 2

    spanner(noun)

    /ˈspænər/

    스패너, 렌치

    a metal hand tool with a shaped end for holding and turning nuts and bolts

    Pass me the 17 mm spanner so I can loosen this nut.

    이 너트를 풀 수 있게 17mm 스패너를 건네주세요.

    Use a ring spanner on tight nuts so it does not slip.

    유의어wrenchadjustable wrenchopen-end wrenchbox-end wrench
    반의어none
  3. 3

    chisel(noun)

    /ˈtʃɪzl/

    정, 끌

    a hand tool with a sharp flat end, hit with a hammer to cut or shape metal, wood or stone

    He used a cold chisel to cut off the rusted bolt head.

    그는 쇠정을 사용해 녹슨 볼트 머리를 잘라 냈다.

    Wear safety glasses when you strike a chisel with a hammer.

    유의어cutting toolgraverscraper
    반의어filleradhesive
  4. 4

    drill bit(noun)

    /drɪl bɪt/

    드릴 비트, 드릴 날

    the cutting part fitted into a drill that makes the hole

    Use an 8.5 mm drill bit before tapping an M10 thread.

    M10 나사산을 내기 전에 8.5mm 드릴 비트를 사용하십시오.

    A blunt drill bit overheats and leaves a rough hole.

    유의어drillaugerboring tool
    반의어fastenerplug
  5. 5

    torque wrench(noun)

    /ˈtɔːk renʃ/

    토크 렌치

    a wrench that lets you tighten a bolt to an exact turning force set in newton metres

    Tighten the cylinder head bolts with a torque wrench set to 90 Nm.

    실린더 헤드 볼트는 90 Nm로 설정한 토크 렌치로 조이십시오.

    Our torque wrenches are calibrated every six months.

  6. 6

    socket wrench(noun)

    /ˈsɒkɪt renʃ/

    소켓 렌치, 라쳇 렌치

    a wrench with a handle and interchangeable round sockets that fit over nuts and bolt heads

    A socket wrench is faster than a spanner in tight spaces.

    좁은 공간에서는 소켓 렌치가 스패너보다 더 빠르다.

    The technician keeps a full socket wrench set in his toolbox.

  7. 7

    Allen key(noun)

    /ˈælən kiː/

    육각 렌치, 알렌키

    a small L-shaped metal bar with six flat sides, used to turn screws with a hexagonal hole

    You need a 5 mm Allen key to remove the guard cover.

    보호 덮개를 떼어 내려면 5 mm 육각 렌치가 필요하다.

    Do not use a worn Allen key, or you will damage the screw head.

  8. 8

    hacksaw(noun)

    /ˈhæksɔː/

    쇠톱, 금속용 톱

    a hand saw with a thin, fine-toothed blade in a frame, used for cutting metal

    Cut the pipe to length with a hacksaw and then file the end.

    쇠톱으로 파이프를 필요한 길이로 자른 다음 끝을 줄로 다듬으십시오.

    Change the hacksaw blade when the teeth become dull.

  9. 9

    file(noun)

    /faɪl/

    줄, 줄칼

    a steel hand tool with a rough surface, used for smoothing or shaping metal by rubbing

    Use a flat file to remove the sharp edges after cutting.

    절단 후 날카로운 모서리를 제거하려면 평줄을 사용하십시오.

    Apprentices practise with a file before they move on to the lathe.

  10. 10

    bench vice(noun)

    /ˈbentʃ vaɪs/

    바이스, 작업대 바이스

    a tool fixed to a workbench with two jaws that hold a piece of work firmly while you work on it

    Clamp the bar in the bench vice before you start sawing.

    톱질을 시작하기 전에 바를 바이스에 고정하십시오.

    Use soft jaws in the bench vice to protect the finished surface.

  11. 11

    centre punch(noun)

    /ˈsentə pʌntʃ/

    센터 펀치, 중심 펀치

    a pointed steel tool hit with a hammer to make a small mark where a hole will be drilled

    Mark each hole position with a centre punch so the drill does not wander.

    드릴이 미끄러지지 않도록 각 구멍 위치를 센터 펀치로 표시하십시오.

    An automatic centre punch makes marking faster on thin sheet.

  12. 12

    clamp(noun)

    /klæmp/

    클램프, 조임쇠

    a device with two parts that can be tightened to hold things firmly together or in place

    Hold the two plates together with clamps before welding.

    용접하기 전에 클램프로 두 판을 맞붙여 고정하십시오.

    A loose clamp allowed the workpiece to move during drilling.

  13. 13

    power drill(noun)

    /ˈpaʊə drɪl/

    전동 드릴, 핸드 드릴

    a hand-held electric tool that turns a drill bit to make holes

    A cordless power drill is handy for installing brackets on site.

    충전식 전동 드릴은 현장에서 브래킷을 설치할 때 편리하다.

    Check the power drill cable for damage before every use.

  14. 14

    angle grinder(noun)

    /ˈæŋɡl ɡraɪndə(r)/

    앵글 그라인더, 디스크 그라인더

    a hand-held power tool with a fast spinning disc, used for cutting, grinding and polishing metal

    Never remove the guard from an angle grinder.

    앵글 그라인더의 보호 덮개는 절대 떼어 내지 마십시오.

    He cleaned the weld with an angle grinder and a flap disc.

  15. 15

    impact wrench(noun)

    /ˈɪmpækt renʃ/

    임팩트 렌치

    a power tool that gives strong, fast turning blows to tighten or loosen large nuts and bolts

    The mechanic used an impact wrench to remove the wheel nuts.

    정비사는 임팩트 렌치로 휠 너트를 풀었다.

    Do not use an impact wrench for final tightening; use a torque wrench.