Aralin 2/10 · 15 salita · 0 natutunan
Hand and power tools
Mga hand tool at power tool
alikate, plais
a hand tool with two handles and jaws, used for gripping, bending or cutting wire and small parts
Use long-nose pliers to fit the spring into the narrow slot.
Gumamit ng alikateng mahaba ang dulo para maipasok ang spring sa makitid na puwang.
He cut the locking wire with a pair of pliers.
Kasingkahulugannipperstweezers (depending on the type)Kasalungatnone (Pliers are a specific tool with no direct opposite)liyabe
a metal hand tool with a shaped end for holding and turning nuts and bolts
Pass me the 17 mm spanner so I can loosen this nut.
Iabot mo sa akin ang 17 mm na liyabe para maluwagan ko ang tuerkang ito.
Use a ring spanner on tight nuts so it does not slip.
Kasingkahuluganwrenchadjustable wrenchopen-end wrenchbox-end wrenchKasalungatnonepait, pait na bakal
a hand tool with a sharp flat end, hit with a hammer to cut or shape metal, wood or stone
He used a cold chisel to cut off the rusted bolt head.
Gumamit siya ng cold chisel na pait upang putulin ang kinakalawang na ulo ng bolt.
Wear safety glasses when you strike a chisel with a hammer.
Kasingkahulugancutting toolgraverscraperKasalungatfilleradhesivemitsa ng barena, talim ng barena
the cutting part fitted into a drill that makes the hole
Use an 8.5 mm drill bit before tapping an M10 thread.
Gumamit ng 8.5 mm na mitsa ng barena bago ang pag-tap ng M10 na sinulid.
A blunt drill bit overheats and leaves a rough hole.
Kasingkahulugandrillaugerboring toolKasalungatfastenerplugtorque wrench, liyabe de torke
a wrench that lets you tighten a bolt to an exact turning force set in newton metres
Tighten the cylinder head bolts with a torque wrench set to 90 Nm.
Higpitan ang mga bolt ng cylinder head gamit ang torque wrench na nakatakda sa 90 Nm.
Our torque wrenches are calibrated every six months.
socket wrench, liyabe de tubo
a wrench with a handle and interchangeable round sockets that fit over nuts and bolt heads
A socket wrench is faster than a spanner in tight spaces.
Mas mabilis ang socket wrench kaysa sa ordinaryong liyabe sa masisikip na lugar.
The technician keeps a full socket wrench set in his toolbox.
Allen key, hex key, liyaveng heksagonal
a small L-shaped metal bar with six flat sides, used to turn screws with a hexagonal hole
You need a 5 mm Allen key to remove the guard cover.
Kailangan mo ng 5 mm na Allen key para tanggalin ang takip na pananggalang.
Do not use a worn Allen key, or you will damage the screw head.
lagaring bakal, hacksaw
a hand saw with a thin, fine-toothed blade in a frame, used for cutting metal
Cut the pipe to length with a hacksaw and then file the end.
Putulin ang tubo sa tamang haba gamit ang lagaring bakal at pagkatapos ay liman ang dulo.
Change the hacksaw blade when the teeth become dull.
lima, kikil
a steel hand tool with a rough surface, used for smoothing or shaping metal by rubbing
Use a flat file to remove the sharp edges after cutting.
Gumamit ng patag na lima para alisin ang matatalim na gilid pagkatapos putulin.
Apprentices practise with a file before they move on to the lathe.
bench vice, pangipit sa mesa
a tool fixed to a workbench with two jaws that hold a piece of work firmly while you work on it
Clamp the bar in the bench vice before you start sawing.
Ipit ang baras sa bench vice bago magsimulang maglagari.
Use soft jaws in the bench vice to protect the finished surface.
center punch, pang-markang suntok
a pointed steel tool hit with a hammer to make a small mark where a hole will be drilled
Mark each hole position with a centre punch so the drill does not wander.
Markahan ang bawat posisyon ng butas gamit ang center punch upang hindi gumala ang drill.
An automatic centre punch makes marking faster on thin sheet.
clamp, pangipit, pang-ipit
a device with two parts that can be tightened to hold things firmly together or in place
Hold the two plates together with clamps before welding.
Ipitin nang magkadikit ang dalawang plato gamit ang mga clamp bago magwelding.
A loose clamp allowed the workpiece to move during drilling.
power drill, de-kuryenteng drill
a hand-held electric tool that turns a drill bit to make holes
A cordless power drill is handy for installing brackets on site.
Kapaki-pakinabang ang cordless na power drill sa pagkakabit ng mga bracket sa lugar ng proyekto.
Check the power drill cable for damage before every use.
angle grinder, pangggiling na de-kuryente
a hand-held power tool with a fast spinning disc, used for cutting, grinding and polishing metal
Never remove the guard from an angle grinder.
Huwag kailanman tanggalin ang takip na pananggalang ng angle grinder.
He cleaned the weld with an angle grinder and a flap disc.
impact wrench, pamihit na de-impact
a power tool that gives strong, fast turning blows to tighten or loosen large nuts and bolts
The mechanic used an impact wrench to remove the wheel nuts.
Gumamit ang mekaniko ng impact wrench para tanggalin ang mga nut ng gulong.
Do not use an impact wrench for final tightening; use a torque wrench.



