تخطَّ إلى المحتوى

الدرس 8/10 · 15 كلمة · تم تعلّم 0

Electrical drawings

المخططات الكهربائية

  1. 1

    revision(noun)

    /rɪˈvɪʒn/

    تعديل, مراجعة

    a change made to a piece of work after feedback, often limited to a set number of rounds

    The agency fee includes two rounds of revisions for each design.

    تشمل أتعاب الوكالة جولتين من التعديلات لكل تصميم.

    The client asked for a revision to the logo colour.

  2. 2

    single-line diagram(noun)

    /ˌsɪŋɡl laɪn ˈdaɪəɡræm/

    مخطط أحادي الخط, مخطط وحيد الخط

    a simplified drawing that shows the main power system with one line for each circuit, including transformers, breakers and feeders

    Study the single-line diagram before switching anything in the substation.

    ادرس المخطط أحادي الخط قبل إجراء أي عملية فصل أو وصل في المحطة الفرعية.

    The single-line diagram shows each feeder and its breaker rating.

  3. 3

    schematic diagram(noun)

    /skiːˈmætɪk ˌdaɪəɡræm/

    مخطط تخطيطي, مخطط دائرة كهربائية

    a drawing that uses standard symbols to show how components in a circuit are connected and how it works

    Follow the schematic diagram to trace the fault in the control circuit.

    اتبع المخطط التخطيطي لتتبع العطل في دائرة التحكم.

    Every technician should be able to read a schematic diagram quickly.

  4. 4

    wiring diagram(noun)

    /ˈwaɪərɪŋ ˌdaɪəɡræm/

    مخطط التمديدات, مخطط التوصيلات

    a drawing that shows the actual wires, terminals and connections between devices as they are installed

    The wiring diagram shows which terminal each wire lands on.

    يبيّن مخطط التوصيلات الطرف الذي يتصل به كل سلك.

    Wire the new sensor according to the wiring diagram on the panel door.

  5. 5

    block diagram(noun)

    /ˈblɒk ˌdaɪəɡræm/

    مخطط صندوقي, مخطط كتلي

    a simple drawing that shows the main parts of a system as boxes joined by lines

    Start with a block diagram before designing the detailed circuits.

    ابدأ بمخطط كتلي قبل تصميم الدوائر التفصيلية.

    The block diagram shows how the sensors, PLC and drives connect.

  6. 6

    layout drawing(noun)

    /ˈleɪaʊt ˌdrɔːɪŋ/

    مخطط التوزيع, مخطط الترتيب

    a plan drawing that shows where equipment, panels and cable routes are placed in a building or room

    The layout drawing shows the switchboard one metre from the back wall.

    يبيّن مخطط التوزيع لوحة التوزيع على بعد متر واحد من الجدار الخلفي.

    Check the layout drawing for clearance in front of each panel.

  7. 7

    lighting layout(noun)

    /ˈlaɪtɪŋ ˌleɪaʊt/

    مخطط توزيع الإنارة, مسقط الإنارة

    a floor plan drawing that shows the position of lights, switches and the circuits that supply them

    The lighting layout shows twelve downlights in the meeting room.

    يبيّن مخطط توزيع الإنارة اثنتي عشرة وحدة إنارة غاطسة في قاعة الاجتماعات.

    The architect changed the ceiling, so we revised the lighting layout.

  8. 8

    riser diagram(noun)

    /ˈraɪzə ˌdaɪəɡræm/

    مخطط المصاعد الرأسية, مخطط التغذية الرأسية

    a drawing that shows how main cables and boards run vertically between the floors of a building

    The riser diagram shows a distribution board on every floor.

    يبيّن مخطط التغذية الرأسية وجود لوحة توزيع في كل طابق.

    Check the riser diagram to find the feeder for the tenth floor.

  9. 9

    electrical symbol(noun)

    /ɪˌlektrɪkl ˈsɪmbl/

    رمز كهربائي

    a standard drawing sign that represents a component, such as a switch, lamp or motor, on a diagram

    Our drawings use IEC electrical symbols, not American ones.

    تستخدم رسوماتنا الرموز الكهربائية وفق معيار IEC، وليس الرموز الأمريكية.

    New staff should learn the electrical symbol for each common device.

  10. 10

    legend(noun)

    /ˈledʒənd/

    مفتاح الرموز, دليل الرموز

    a table on a drawing that explains what each symbol and abbreviation means

    Check the legend if you do not recognise a symbol on the plan.

    راجع مفتاح الرموز إذا لم تتعرف على رمز في المخطط.

    The legend lists every type of light fitting used in the project.

  11. 11

    shop drawing(noun)

    /ˈʃɒp ˌdrɔːɪŋ/

    مخططات الورشة, رسومات تنفيذية تفصيلية

    a detailed drawing made by the contractor or supplier showing exactly how equipment will be built or installed

    The panel builder must submit shop drawings for approval before manufacture.

    يجب على مصنّع اللوحات تقديم مخططات الورشة للاعتماد قبل التصنيع.

    The consultant returned the shop drawings with several comments.

  12. 12

    as-built drawing(noun)

    /ˌæz ˈbɪlt ˌdrɔːɪŋ/

    مخططات كما نُفذت, رسومات التنفيذ النهائية

    a final drawing updated to show exactly how the installation was actually completed

    Mark every cable route change so we can prepare accurate as-built drawings.

    سجّل كل تغيير في مسارات الكبلات حتى نتمكن من إعداد مخططات كما نُفذت بدقة.

    The client will not sign off until the as-built drawings are delivered.

  13. 13

    panel schedule(noun)

    /ˈpænl ˌʃedjuːl/

    جدول اللوحة, جدول دوائر لوحة التوزيع

    a table listing each circuit in a distribution board with its breaker size, load and description

    Add the new air conditioner to the panel schedule for board DB-3.

    أضف مكيّف الهواء الجديد إلى جدول اللوحة الخاص بلوحة التوزيع DB-3.

    The panel schedule shows that circuit 12 supplies the server room lights.

  14. 14

    cable schedule(noun)

    /ˈkeɪbl ˌʃedjuːl/

    جدول الكابلات, قائمة الكابلات

    a list of every cable in a project showing its number, size, type, length, start point and end point

    Each cable is tagged with the number from the cable schedule.

    يُوسَم كل كابل بالرقم الوارد في جدول الكابلات.

    Use the cable schedule to order the correct lengths from the supplier.

  15. 15

    load schedule(noun)

    /ˈləʊd ˌʃedjuːl/

    جدول الأحمال, جدول الأحمال الكهربائية

    a table that lists the electrical loads of a building or system and adds them up to size the supply

    The load schedule shows a maximum demand of 650 kilowatts.

    يُظهر جدول الأحمال حدًّا أقصى للطلب قدره 650 كيلوواط.

    Update the load schedule whenever new equipment is added.