コンテンツへスキップ

レッスン8/10 · 15語 · 覚えた単語 0

Electrical drawings

電気図面

  1. 1

    revision(noun)

    /rɪˈvɪʒn/

    修正, 修正対応, リビジョン

    a change made to a piece of work after feedback, often limited to a set number of rounds

    The agency fee includes two rounds of revisions for each design.

    代理店の料金には、各デザインにつき2回分の修正が含まれている。

    The client asked for a revision to the logo colour.

  2. 2

    single-line diagram(noun)

    /ˌsɪŋɡl laɪn ˈdaɪəɡræm/

    単線結線図, 単線図

    a simplified drawing that shows the main power system with one line for each circuit, including transformers, breakers and feeders

    Study the single-line diagram before switching anything in the substation.

    変電所で操作を行う前に、単線結線図をよく確認してください。

    The single-line diagram shows each feeder and its breaker rating.

  3. 3

    schematic diagram(noun)

    /skiːˈmætɪk ˌdaɪəɡræm/

    回路図, 展開接続図

    a drawing that uses standard symbols to show how components in a circuit are connected and how it works

    Follow the schematic diagram to trace the fault in the control circuit.

    回路図に沿って、制御回路の故障箇所をたどってください。

    Every technician should be able to read a schematic diagram quickly.

  4. 4

    wiring diagram(noun)

    /ˈwaɪərɪŋ ˌdaɪəɡræm/

    配線図, 結線図

    a drawing that shows the actual wires, terminals and connections between devices as they are installed

    The wiring diagram shows which terminal each wire lands on.

    配線図には、各電線がどの端子に接続されるかが示されている。

    Wire the new sensor according to the wiring diagram on the panel door.

  5. 5

    block diagram(noun)

    /ˈblɒk ˌdaɪəɡræm/

    ブロック図, 系統図

    a simple drawing that shows the main parts of a system as boxes joined by lines

    Start with a block diagram before designing the detailed circuits.

    詳細な回路を設計する前に、まずブロック図を作成してください。

    The block diagram shows how the sensors, PLC and drives connect.

  6. 6

    layout drawing(noun)

    /ˈleɪaʊt ˌdrɔːɪŋ/

    機器配置図, 配置図

    a plan drawing that shows where equipment, panels and cable routes are placed in a building or room

    The layout drawing shows the switchboard one metre from the back wall.

    機器配置図では、配電盤は背面の壁から1メートル離れた位置にある。

    Check the layout drawing for clearance in front of each panel.

  7. 7

    lighting layout(noun)

    /ˈlaɪtɪŋ ˌleɪaʊt/

    照明配置図, 照明平面図

    a floor plan drawing that shows the position of lights, switches and the circuits that supply them

    The lighting layout shows twelve downlights in the meeting room.

    照明配置図によると、会議室にはダウンライトが12個ある。

    The architect changed the ceiling, so we revised the lighting layout.

  8. 8

    riser diagram(noun)

    /ˈraɪzə ˌdaɪəɡræm/

    幹線系統図, ライザー図

    a drawing that shows how main cables and boards run vertically between the floors of a building

    The riser diagram shows a distribution board on every floor.

    幹線系統図には、各階に分電盤があることが示されている。

    Check the riser diagram to find the feeder for the tenth floor.

  9. 9

    electrical symbol(noun)

    /ɪˌlektrɪkl ˈsɪmbl/

    電気用図記号, 電気記号

    a standard drawing sign that represents a component, such as a switch, lamp or motor, on a diagram

    Our drawings use IEC electrical symbols, not American ones.

    当社の図面にはアメリカの記号ではなく、IECの電気用図記号を使用している。

    New staff should learn the electrical symbol for each common device.

  10. 10

    legend(noun)

    /ˈledʒənd/

    凡例, 記号一覧

    a table on a drawing that explains what each symbol and abbreviation means

    Check the legend if you do not recognise a symbol on the plan.

    図面上で分からない記号があれば、凡例を確認してください。

    The legend lists every type of light fitting used in the project.

  11. 11

    shop drawing(noun)

    /ˈʃɒp ˌdrɔːɪŋ/

    施工図, 製作図

    a detailed drawing made by the contractor or supplier showing exactly how equipment will be built or installed

    The panel builder must submit shop drawings for approval before manufacture.

    盤メーカーは、製作前に承認用の製作図を提出しなければならない。

    The consultant returned the shop drawings with several comments.

  12. 12

    as-built drawing(noun)

    /ˌæz ˈbɪlt ˌdrɔːɪŋ/

    竣工図, 完成図

    a final drawing updated to show exactly how the installation was actually completed

    Mark every cable route change so we can prepare accurate as-built drawings.

    正確な竣工図を作成できるよう、ケーブルルートを変更した箇所はすべて記録してください。

    The client will not sign off until the as-built drawings are delivered.

  13. 13

    panel schedule(noun)

    /ˈpænl ˌʃedjuːl/

    分電盤回路表, 盤結線表, 負荷一覧表

    a table listing each circuit in a distribution board with its breaker size, load and description

    Add the new air conditioner to the panel schedule for board DB-3.

    新しいエアコンを分電盤DB-3の回路表に追加してください。

    The panel schedule shows that circuit 12 supplies the server room lights.

  14. 14

    cable schedule(noun)

    /ˈkeɪbl ˌʃedjuːl/

    ケーブルスケジュール, ケーブル表

    a list of every cable in a project showing its number, size, type, length, start point and end point

    Each cable is tagged with the number from the cable schedule.

    各ケーブルには、ケーブルスケジュールの番号が付けられている。

    Use the cable schedule to order the correct lengths from the supplier.

  15. 15

    load schedule(noun)

    /ˈləʊd ˌʃedjuːl/

    負荷表, 負荷集計表

    a table that lists the electrical loads of a building or system and adds them up to size the supply

    The load schedule shows a maximum demand of 650 kilowatts.

    負荷表では、最大需要電力は650キロワットとなっている。

    Update the load schedule whenever new equipment is added.