Leçon 9/10 · 16 mots · 0 appris
Drawings and specifications
Plans et cahier des charges
plan d'étage, plan de niveau
a drawing that shows the layout of one floor of a building from above, with walls, doors, windows and rooms
The typical floor plan shows eight apartments around a central core.
Le plan d'étage type montre huit appartements répartis autour d'un noyau central.
Mark the new partition on the floor plan and send it to the architect.
SynonymesblueprintlayoutplandiagramAntonymesnonemodification, retouche, itération
a change made to a piece of work after feedback, often limited to a set number of rounds
The agency fee includes two rounds of revisions for each design.
Les honoraires de l'agence incluent deux séries de modifications pour chaque maquette.
The client asked for a revision to the logo colour.
plan d'atelier, plan d'exécution, plan de fabrication
a detailed drawing made by the contractor or supplier showing exactly how equipment will be built or installed
The panel builder must submit shop drawings for approval before manufacture.
Le tableautier doit soumettre les plans d'atelier pour approbation avant la fabrication.
The consultant returned the shop drawings with several comments.
plan de récolement, plan as-built, dossier des ouvrages exécutés
a final drawing updated to show exactly how the installation was actually completed
Mark every cable route change so we can prepare accurate as-built drawings.
Notez chaque modification de cheminement de câbles afin que nous puissions établir des plans de récolement exacts.
The client will not sign off until the as-built drawings are delivered.
plan de masse
a drawing that shows the whole site from above, including buildings, roads, boundaries and connections to services
The site plan shows where the new car park and gate will be.
Le plan de masse indique l'emplacement du nouveau parking et du portail.
Attach the approved site plan to the building permit application.
façade, élévation
a drawing that shows one outside face of a building as seen straight from the front, side or back
The north elevation shows the position of all windows and balconies.
La façade nord indique l'emplacement de toutes les fenêtres et de tous les balcons.
The client asked for changes to the colours on the main elevation.
coupe
a drawing that shows a building as if it were cut vertically, showing floor heights, levels and how parts fit together
The section through the stairs shows the headroom at each landing.
La coupe sur l'escalier indique la hauteur libre à chaque palier.
Check the ceiling heights on the building section before ordering ducts.
plan de détail, détail d'exécution
a large-scale drawing that shows exactly how a small part of a building is made or connected
The detail drawing shows how the waterproofing turns up at the wall.
Le plan de détail montre comment l'étanchéité se relève contre le mur.
We are waiting for the detail drawing of the handrail fixing.
axe de référence, trame
one of the reference lines, marked with letters and numbers, used on drawings and on site to locate columns and walls
The crack is on the slab between gridlines 3 and 4.
La fissure se situe sur la dalle entre les axes 3 et 4.
All columns are set out from the gridlines on the structural drawings.
plan de structure, plan de béton armé
a drawing prepared by the structural engineer showing the sizes, reinforcement and positions of the load-carrying parts
The beam sizes on the structural drawing do not match the architectural layout.
Les dimensions des poutres sur le plan de structure ne correspondent pas au plan d'architecte.
Steel fixers work directly from the structural drawings.
cahier des charges, CCTP
a written document that describes the materials, standards and quality of work required for a construction project
The specification requires all paint to be low in harmful chemicals.
Le CCTP exige que toutes les peintures soient à faible teneur en substances nocives.
If the drawing and the specification disagree, ask the consultant which one applies.
maquette numérique, BIM
building information modelling: creating and sharing a detailed 3D digital model of a building with all its information
The contractor uses BIM to check quantities and plan the work sequence.
L'entreprise utilise le BIM pour vérifier les quantités et planifier l'ordre des travaux.
Our BIM coordinator updates the model after every design change.
détection de conflits, détection de clashs
the process of using a 3D model to find places where pipes, ducts, beams or other elements would hit each other
Clash detection found 200 places where ducts hit the beams.
La détection de conflits a révélé 200 endroits où les gaines croisent les poutres.
We run clash detection every week during MEP coordination.
demande d'information, RFI
request for information: a formal written question from the contractor to the designer when drawings are unclear or missing
We raised an RFI because the beam level is missing from the section.
Nous avons émis une demande d'information car le niveau de la poutre est absent de la coupe.
The architect must respond to each RFI within seven days.
soumission pour approbation, dossier de soumission
a document, sample or drawing sent by the contractor to the consultant for approval before using a material or method
The tile submittal included samples and test certificates.
Le dossier de soumission des carrelages comprenait des échantillons et des certificats d'essai.
Late submittals are delaying the ordering of the lifts.
