İçeriğe geç

Ders 9/10 · 16 kelime · Öğrenilen: 0

Drawings and specifications

Çizimler ve teknik şartnameler

  1. 1

    floor plan(noun)

    /flɔːr plæn/

    kat planı, plan

    a drawing that shows the layout of one floor of a building from above, with walls, doors, windows and rooms

    The typical floor plan shows eight apartments around a central core.

    Tipik kat planında merkezi bir çekirdeğin etrafında sekiz daire yer alıyor.

    Mark the new partition on the floor plan and send it to the architect.

    Eş anlamlılarblueprintlayoutplandiagram
    Zıt anlamlılarnone
  2. 2

    scale(noun)

    /skeɪl/

    ölçek

    the ratio between the size of something on a drawing and its real size, such as 1:100

    This floor plan is drawn at a scale of 1:100.

    Bu kat planı 1:100 ölçeğinde çizilmiştir.

    Never measure from a drawing that is not to scale; use the written dimensions.

  3. 3

    revision(noun)

    /rɪˈvɪʒn/

    revizyon, düzeltme turu

    a change made to a piece of work after feedback, often limited to a set number of rounds

    The agency fee includes two rounds of revisions for each design.

    Ajans ücreti, her tasarım için iki tur revizyonu kapsıyor.

    The client asked for a revision to the logo colour.

  4. 4

    shop drawing(noun)

    /ˈʃɒp ˌdrɔːɪŋ/

    imalat resmi, uygulama resmi, şop çizimi

    a detailed drawing made by the contractor or supplier showing exactly how equipment will be built or installed

    The panel builder must submit shop drawings for approval before manufacture.

    Pano imalatçısı, üretimden önce onay için imalat resimlerini sunmalıdır.

    The consultant returned the shop drawings with several comments.

  5. 5

    as-built drawing(noun)

    /ˌæz ˈbɪlt ˌdrɔːɪŋ/

    as-built çizim, uygulama sonrası çizim, tamamlanmış proje

    a final drawing updated to show exactly how the installation was actually completed

    Mark every cable route change so we can prepare accurate as-built drawings.

    Doğru as-built çizimler hazırlayabilmemiz için kablo güzergâhındaki her değişikliği işaretleyin.

    The client will not sign off until the as-built drawings are delivered.

  6. 6

    site plan(noun)

    /ˈsaɪt ˌplæn/

    vaziyet planı

    a drawing that shows the whole site from above, including buildings, roads, boundaries and connections to services

    The site plan shows where the new car park and gate will be.

    Vaziyet planı yeni otoparkın ve kapının nerede olacağını gösteriyor.

    Attach the approved site plan to the building permit application.

  7. 7

    elevation(noun)

    /ˌelɪˈveɪʃn/

    görünüş, cephe görünüşü

    a drawing that shows one outside face of a building as seen straight from the front, side or back

    The north elevation shows the position of all windows and balconies.

    Kuzey görünüşü tüm pencerelerin ve balkonların konumunu gösterir.

    The client asked for changes to the colours on the main elevation.

  8. 8

    section(noun)

    /ˈsekʃn/

    kesit

    a drawing that shows a building as if it were cut vertically, showing floor heights, levels and how parts fit together

    The section through the stairs shows the headroom at each landing.

    Merdivenden geçen kesit, her sahanlıktaki baş yüksekliğini gösterir.

    Check the ceiling heights on the building section before ordering ducts.

  9. 9

    detail drawing(noun)

    /ˈdiːteɪl ˌdrɔːɪŋ/

    detay çizimi, detay paftası

    a large-scale drawing that shows exactly how a small part of a building is made or connected

    The detail drawing shows how the waterproofing turns up at the wall.

    Detay çizimi, su yalıtımının duvarda nasıl yukarı döndüğünü gösteriyor.

    We are waiting for the detail drawing of the handrail fixing.

  10. 10

    gridline(noun)

    /ˈɡrɪdlaɪn/

    aks, aks çizgisi

    one of the reference lines, marked with letters and numbers, used on drawings and on site to locate columns and walls

    The crack is on the slab between gridlines 3 and 4.

    Çatlak, döşemede 3 ve 4 numaralı akslar arasında bulunuyor.

    All columns are set out from the gridlines on the structural drawings.

  11. 11

    structural drawing(noun)

    /ˈstrʌktʃərəl ˌdrɔːɪŋ/

    statik proje, taşıyıcı sistem çizimi

    a drawing prepared by the structural engineer showing the sizes, reinforcement and positions of the load-carrying parts

    The beam sizes on the structural drawing do not match the architectural layout.

    Statik projedeki kiriş boyutları mimari yerleşim planıyla uyuşmuyor.

    Steel fixers work directly from the structural drawings.

  12. 12

    specification(noun)

    /ˌspesɪfɪˈkeɪʃn/

    şartname, teknik şartname

    a written document that describes the materials, standards and quality of work required for a construction project

    The specification requires all paint to be low in harmful chemicals.

    Şartname, tüm boyaların zararlı kimyasal içeriğinin düşük olmasını şart koşuyor.

    If the drawing and the specification disagree, ask the consultant which one applies.

  13. 13

    BIM(abbreviation)

    /bɪm/

    BIM, yapı bilgi modellemesi, bina bilgi modellemesi

    building information modelling: creating and sharing a detailed 3D digital model of a building with all its information

    The contractor uses BIM to check quantities and plan the work sequence.

    Müteahhit, metrajları kontrol etmek ve iş sırasını planlamak için BIM kullanıyor.

    Our BIM coordinator updates the model after every design change.

  14. 14

    clash detection(noun)

    /ˈklæʃ dɪˌtekʃn/

    çakışma tespiti, çakışma kontrolü

    the process of using a 3D model to find places where pipes, ducts, beams or other elements would hit each other

    Clash detection found 200 places where ducts hit the beams.

    Çakışma tespiti, kanalların kirişlerle çakıştığı 200 yer buldu.

    We run clash detection every week during MEP coordination.

  15. 15

    RFI(abbreviation)

    /ˌɑːr ef ˈaɪ/

    RFI, bilgi talebi, bilgi talep formu

    request for information: a formal written question from the contractor to the designer when drawings are unclear or missing

    We raised an RFI because the beam level is missing from the section.

    Kesitte kiriş kotu eksik olduğu için bir RFI açtık.

    The architect must respond to each RFI within seven days.

  16. 16

    submittal(noun)

    /səbˈmɪtl/

    onaya sunulan doküman, malzeme onay dosyası

    a document, sample or drawing sent by the contractor to the consultant for approval before using a material or method

    The tile submittal included samples and test certificates.

    Fayans onay dosyası numuneleri ve test belgelerini içeriyordu.

    Late submittals are delaying the ordering of the lifts.