सामग्री पर जाएँ

पाठ 9/10 · 15 शब्द · 0 याद हो गए

Hydraulics and pneumatics

हाइड्रॉलिक्स और न्यूमैटिक्स

  1. 1

    valve(noun)

    /vælv/

    वाल्व, कपाट

    a device that opens, closes or controls the flow of liquid or gas through a pipe

    Close the main valve before you disconnect the hose.

    होज़ निकालने से पहले मुख्य वाल्व बंद कर दें।

    A sticking valve was stopping the cylinder from moving.

    समानार्थीspigotstopcocktapcockregulator
    विलोमblockageobstructionclosure
  2. 2

    hose(noun)

    /həʊz/

    नली, होज़ पाइप, लचीली नली

    a flexible tube that carries liquid or air, for example oil in a hydraulic system

    Replace any hydraulic hose that shows cracks or bulges.

    जिस भी हाइड्रोलिक नली में दरारें या उभार दिखें, उसे बदल दें।

    A burst hose sprayed oil across the floor.

    समानार्थीtubepipeconduit
    विलोमsolidblockage
  3. 3

    hydraulics(noun)

    /haɪˈdrɔːlɪks/

    द्रवचालित प्रणाली, हाइड्रोलिक्स

    the use of liquid under pressure, usually oil, to move or power machines

    Hydraulics are used on the press because they produce very high force.

    प्रेस में हाइड्रोलिक्स का उपयोग किया जाता है क्योंकि यह बहुत अधिक बल उत्पन्न करता है।

    He took a short course in industrial hydraulics.

    समानार्थीfluid powerhydrodynamicswaterpower
    विलोमpneumaticsmechanics
  4. 4

    pneumatics(noun)

    /njuːˈmætɪks/

    वायवीय प्रणाली, न्यूमेटिक्स

    the use of compressed air to move or power machines and tools

    Pneumatics are clean and fast, which suits the packaging line.

    वायवीय प्रणालियाँ स्वच्छ और तेज़ होती हैं, जो पैकेजिंग लाइन के लिए उपयुक्त हैं।

    The maintenance team needs more training in pneumatics.

  5. 5

    hydraulic cylinder(noun)

    /haɪˌdrɒlɪk ˈsɪlɪndə(r)/

    हाइड्रोलिक सिलिंडर, द्रवचालित सिलिंडर

    a device in which oil under pressure pushes a piston and rod to produce straight-line force

    The main hydraulic cylinder lifts the press ram after each stroke.

    मुख्य हाइड्रोलिक सिलिंडर हर स्ट्रोक के बाद प्रेस के रैम को ऊपर उठाता है।

    Oil on the rod shows that the hydraulic cylinder seals are leaking.

  6. 6

    pump(noun)

    /pʌmp/

    पंप

    a machine that moves liquid or gas through pipes, or creates pressure in a hydraulic system

    The hydraulic pump delivers 40 litres per minute.

    हाइड्रोलिक पंप प्रति मिनट 40 लीटर की आपूर्ति करता है।

    A noisy pump can be a sign of air in the oil.

  7. 7

    directional control valve(noun)

    /dəˌrekʃənl kənˈtrəʊl vælv/

    दिशा नियंत्रण वाल्व

    a valve that sends fluid to different paths to make an actuator move forward, back or stop

    The directional control valve decides which way the cylinder moves.

    दिशा नियंत्रण वाल्व तय करता है कि सिलिंडर किस दिशा में चलेगा।

    We replaced the directional control valve after the spool jammed.

  8. 8

    pressure relief valve(noun)

    /ˌpreʃə rɪˈliːf vælv/

    प्रेशर रिलीफ वाल्व, दाब राहत वाल्व

    a safety valve that opens automatically to release fluid when the pressure gets too high

    The pressure relief valve is set at 160 bar.

    प्रेशर रिलीफ वाल्व 160 बार पर सेट किया गया है।

    Never adjust the pressure relief valve without approval.

  9. 9

    solenoid valve(noun)

    /ˈsəʊlənɔɪd vælv/

    सोलेनॉइड वाल्व, विद्युत चुंबकीय वाल्व

    a valve opened and closed by an electric coil, so it can be controlled automatically

    The PLC switches the solenoid valve to start the air blast.

    पीएलसी हवा का झोंका शुरू करने के लिए सोलेनॉइड वाल्व को चालू करता है।

    The solenoid valve coil burned out and the cylinder stopped.

  10. 10

    actuator(noun)

    /ˈæktʃueɪtə(r)/

    एक्चुएटर, प्रवर्तक

    a part such as a cylinder or motor that turns energy into movement to operate a machine

    A pneumatic actuator opens the gate on the hopper.

    न्यूमेटिक एक्चुएटर हॉपर का गेट खोलता है।

    Check the actuator stroke after replacing the seals.

  11. 11

    air compressor(noun)

    /ˈeə kəmpresə(r)/

    एयर कंप्रेसर, वायु संपीडक

    a machine that squeezes air into a tank under pressure to power pneumatic tools and equipment

    Drain the water from the air compressor tank every day.

    एयर कंप्रेसर की टंकी से हर दिन पानी निकालें।

    The factory runs two screw air compressors in turn.

  12. 12

    hydraulic fluid(noun)

    /haɪˌdrɒlɪk ˈfluːɪd/

    हाइड्रोलिक तेल, द्रवचालित द्रव

    the special oil used in a hydraulic system to transfer power, lubricate and cool

    Top up the hydraulic fluid to the middle of the sight glass.

    हाइड्रोलिक तेल को साइट ग्लास के बीच तक भर दें।

    Dirty hydraulic fluid is the main cause of valve failure.

  13. 13

    fitting(noun)

    /ˈfɪtɪŋ/

    फिटिंग, पाइप जोड़

    a small part used to connect pipes, hoses or tubes to each other or to equipment

    Tighten the fitting a quarter turn if it is weeping oil.

    अगर फिटिंग से तेल रिस रहा हो, तो उसे पाव चक्कर कस दें।

    Push-in fittings make it quick to connect air lines.

  14. 14

    pressure gauge(noun)

    /ˈpreʃə ɡeɪdʒ/

    प्रेशर गेज, दाबमापी

    an instrument with a dial that shows the pressure of a liquid or gas in a system

    The pressure gauge should read 6 bar when the system is running.

    प्रणाली चलते समय प्रेशर गेज 6 बार दिखाना चाहिए।

    Fit a pressure gauge after the pump to help with fault finding.

  15. 15

    flow rate(noun)

    /ˈfləʊ reɪt/

    प्रवाह दर

    the amount of liquid or gas that passes a point in a certain time, such as litres per minute

    The cylinder speed depends on the flow rate from the pump.

    सिलिंडर की गति पंप की प्रवाह दर पर निर्भर करती है।

    A blocked filter reduced the flow rate to the cooler.