ข้ามไปยังเนื้อหา

บทที่ 9/10 · 15 คำ · จำได้แล้ว 0

Hydraulics and pneumatics

ระบบไฮดรอลิกและนิวเมติกส์

  1. 1

    valve(noun)

    /vælv/

    วาล์ว, ลิ้น

    a device that opens, closes or controls the flow of liquid or gas through a pipe

    Close the main valve before you disconnect the hose.

    ปิดวาล์วหลักก่อนที่จะถอดสายยางออก

    A sticking valve was stopping the cylinder from moving.

    คำพ้องความหมายspigotstopcocktapcockregulator
    คำตรงข้ามblockageobstructionclosure
  2. 2

    hose(noun)

    /həʊz/

    ท่อยาง, สายยาง, ท่ออ่อน

    a flexible tube that carries liquid or air, for example oil in a hydraulic system

    Replace any hydraulic hose that shows cracks or bulges.

    ให้เปลี่ยนท่อน้ำมันไฮดรอลิกทุกเส้นที่มีรอยแตกหรือบวมโป่ง

    A burst hose sprayed oil across the floor.

    คำพ้องความหมายtubepipeconduit
    คำตรงข้ามsolidblockage
  3. 3

    hydraulics(noun)

    /haɪˈdrɔːlɪks/

    ระบบไฮดรอลิก, ไฮดรอลิกส์, กลศาสตร์ของไหล

    the use of liquid under pressure, usually oil, to move or power machines

    Hydraulics are used on the press because they produce very high force.

    เครื่องอัดใช้ระบบไฮดรอลิกเพราะให้แรงสูงมาก

    He took a short course in industrial hydraulics.

    คำพ้องความหมายfluid powerhydrodynamicswaterpower
    คำตรงข้ามpneumaticsmechanics
  4. 4

    pneumatics(noun)

    /njuːˈmætɪks/

    นิวเมติกส์, ระบบลม, ระบบนิวแมติก

    the use of compressed air to move or power machines and tools

    Pneumatics are clean and fast, which suits the packaging line.

    ระบบนิวเมติกส์สะอาดและทำงานได้รวดเร็ว จึงเหมาะกับสายการบรรจุภัณฑ์

    The maintenance team needs more training in pneumatics.

  5. 5

    hydraulic cylinder(noun)

    /haɪˌdrɒlɪk ˈsɪlɪndə(r)/

    กระบอกสูบไฮดรอลิก, กระบอกไฮดรอลิก

    a device in which oil under pressure pushes a piston and rod to produce straight-line force

    The main hydraulic cylinder lifts the press ram after each stroke.

    กระบอกสูบไฮดรอลิกหลักยกแรมของเครื่องกดขึ้นหลังจากการกดแต่ละครั้ง

    Oil on the rod shows that the hydraulic cylinder seals are leaking.

  6. 6

    pump(noun)

    /pʌmp/

    ปั๊ม, เครื่องสูบ

    a machine that moves liquid or gas through pipes, or creates pressure in a hydraulic system

    The hydraulic pump delivers 40 litres per minute.

    ปั๊มไฮดรอลิกจ่ายได้ 40 ลิตรต่อนาที

    A noisy pump can be a sign of air in the oil.

  7. 7

    directional control valve(noun)

    /dəˌrekʃənl kənˈtrəʊl vælv/

    วาล์วควบคุมทิศทาง, วาล์วกำหนดทิศทาง

    a valve that sends fluid to different paths to make an actuator move forward, back or stop

    The directional control valve decides which way the cylinder moves.

    วาล์วควบคุมทิศทางเป็นตัวกำหนดว่ากระบอกสูบจะเคลื่อนที่ไปทางใด

    We replaced the directional control valve after the spool jammed.

  8. 8

    pressure relief valve(noun)

    /ˌpreʃə rɪˈliːf vælv/

    วาล์วระบายความดัน, วาล์วนิรภัย

    a safety valve that opens automatically to release fluid when the pressure gets too high

    The pressure relief valve is set at 160 bar.

    วาล์วระบายความดันถูกตั้งไว้ที่ 160 บาร์

    Never adjust the pressure relief valve without approval.

  9. 9

    solenoid valve(noun)

    /ˈsəʊlənɔɪd vælv/

    โซลินอยด์วาล์ว, วาล์วไฟฟ้า

    a valve opened and closed by an electric coil, so it can be controlled automatically

    The PLC switches the solenoid valve to start the air blast.

    PLC สั่งสวิตช์โซลินอยด์วาล์วเพื่อเริ่มเป่าลม

    The solenoid valve coil burned out and the cylinder stopped.

  10. 10

    actuator(noun)

    /ˈæktʃueɪtə(r)/

    แอคชูเอเตอร์, อุปกรณ์ขับเคลื่อน

    a part such as a cylinder or motor that turns energy into movement to operate a machine

    A pneumatic actuator opens the gate on the hopper.

    แอคชูเอเตอร์นิวเมติกส์เปิดประตูของถังป้อนวัสดุ

    Check the actuator stroke after replacing the seals.

  11. 11

    air compressor(noun)

    /ˈeə kəmpresə(r)/

    เครื่องอัดอากาศ, ปั๊มลม

    a machine that squeezes air into a tank under pressure to power pneumatic tools and equipment

    Drain the water from the air compressor tank every day.

    ระบายน้ำออกจากถังเครื่องอัดอากาศทุกวัน

    The factory runs two screw air compressors in turn.

  12. 12

    hydraulic fluid(noun)

    /haɪˌdrɒlɪk ˈfluːɪd/

    น้ำมันไฮดรอลิก

    the special oil used in a hydraulic system to transfer power, lubricate and cool

    Top up the hydraulic fluid to the middle of the sight glass.

    เติมน้ำมันไฮดรอลิกให้ถึงกึ่งกลางของกระจกมองระดับ

    Dirty hydraulic fluid is the main cause of valve failure.

  13. 13

    fitting(noun)

    /ˈfɪtɪŋ/

    ข้อต่อ, ฟิตติ้ง

    a small part used to connect pipes, hoses or tubes to each other or to equipment

    Tighten the fitting a quarter turn if it is weeping oil.

    ขันข้อต่อเพิ่มอีกหนึ่งในสี่รอบหากมีน้ำมันซึมออกมา

    Push-in fittings make it quick to connect air lines.

  14. 14

    pressure gauge(noun)

    /ˈpreʃə ɡeɪdʒ/

    เกจวัดความดัน, มาตรวัดความดัน

    an instrument with a dial that shows the pressure of a liquid or gas in a system

    The pressure gauge should read 6 bar when the system is running.

    เกจวัดความดันควรอ่านค่าได้ 6 บาร์เมื่อระบบกำลังทำงาน

    Fit a pressure gauge after the pump to help with fault finding.

  15. 15

    flow rate(noun)

    /ˈfləʊ reɪt/

    อัตราการไหล, ปริมาณการไหล

    the amount of liquid or gas that passes a point in a certain time, such as litres per minute

    The cylinder speed depends on the flow rate from the pump.

    ความเร็วของกระบอกสูบขึ้นอยู่กับอัตราการไหลจากปั๊ม

    A blocked filter reduced the flow rate to the cooler.