Aralin 9/10 · 15 salita · 0 natutunan
Hydraulics and pneumatics
Hidrolika at pneumatics
balbula
a device that opens, closes or controls the flow of liquid or gas through a pipe
Close the main valve before you disconnect the hose.
Isara ang pangunahing balbula bago idiskonekta ang hose.
A sticking valve was stopping the cylinder from moving.
KasingkahuluganspigotstopcocktapcockregulatorKasalungatblockageobstructionclosurenababaluktot na tubo, medyas
a flexible tube that carries liquid or air, for example oil in a hydraulic system
Replace any hydraulic hose that shows cracks or bulges.
Palitan ang anumang haydrolikong tubo na may bitak o umbok.
A burst hose sprayed oil across the floor.
KasingkahulugantubepipeconduitKasalungatsolidblockagehaydrolika, sistemang haydroliko
the use of liquid under pressure, usually oil, to move or power machines
Hydraulics are used on the press because they produce very high force.
Ginagamit ang haydrolika sa pres dahil nakalilikha ito ng napakataas na puwersa.
He took a short course in industrial hydraulics.
Kasingkahuluganfluid powerhydrodynamicswaterpowerKasalungatpneumaticsmechanicsniyumatika, teknolohiyang de-hangin
the use of compressed air to move or power machines and tools
Pneumatics are clean and fast, which suits the packaging line.
Malinis at mabilis ang niyumatika, kaya angkop ito sa linya ng pagbabalot.
The maintenance team needs more training in pneumatics.
silindrong haydroliko
a device in which oil under pressure pushes a piston and rod to produce straight-line force
The main hydraulic cylinder lifts the press ram after each stroke.
Ang pangunahing silindrong haydroliko ang nagbubuhat ng ram ng press pagkatapos ng bawat pag-pindot.
Oil on the rod shows that the hydraulic cylinder seals are leaking.
balbulang pang-kontrol ng direksyon
a valve that sends fluid to different paths to make an actuator move forward, back or stop
The directional control valve decides which way the cylinder moves.
Ang balbulang pang-kontrol ng direksyon ang nagtatakda kung saang direksyon gagalaw ang silindro.
We replaced the directional control valve after the spool jammed.
balbulang pampawala ng presyon, balbulang pangkaligtasan
a safety valve that opens automatically to release fluid when the pressure gets too high
The pressure relief valve is set at 160 bar.
Nakatakda sa 160 bar ang balbulang pampawala ng presyon.
Never adjust the pressure relief valve without approval.
balbulang solenoid, balbulang de-kuryente
a valve opened and closed by an electric coil, so it can be controlled automatically
The PLC switches the solenoid valve to start the air blast.
Binubuksan ng PLC ang balbulang solenoid upang simulan ang pagbuga ng hangin.
The solenoid valve coil burned out and the cylinder stopped.
aktuwetor, mekanismong pampagalaw
a part such as a cylinder or motor that turns energy into movement to operate a machine
A pneumatic actuator opens the gate on the hopper.
Isang aktuwetor na niyumatiko ang nagbubukas ng pinto ng hopper.
Check the actuator stroke after replacing the seals.
kompresor ng hangin
a machine that squeezes air into a tank under pressure to power pneumatic tools and equipment
Drain the water from the air compressor tank every day.
Alisan ng tubig ang tangke ng kompresor ng hangin araw-araw.
The factory runs two screw air compressors in turn.
langis na haydroliko, likidong haydroliko
the special oil used in a hydraulic system to transfer power, lubricate and cool
Top up the hydraulic fluid to the middle of the sight glass.
Dagdagan ang langis na haydroliko hanggang sa gitna ng sight glass.
Dirty hydraulic fluid is the main cause of valve failure.
kabit ng tubo, pangkonekta ng tubo
a small part used to connect pipes, hoses or tubes to each other or to equipment
Tighten the fitting a quarter turn if it is weeping oil.
Higpitan ang kabit nang isang-kapat na ikot kung tumatagas ang langis.
Push-in fittings make it quick to connect air lines.
panukat ng presyon, medidor ng presyon
an instrument with a dial that shows the pressure of a liquid or gas in a system
The pressure gauge should read 6 bar when the system is running.
Dapat 6 bar ang basa ng panukat ng presyon kapag tumatakbo ang sistema.
Fit a pressure gauge after the pump to help with fault finding.
bilis ng daloy, dami ng daloy
the amount of liquid or gas that passes a point in a certain time, such as litres per minute
The cylinder speed depends on the flow rate from the pump.
Nakasalalay ang bilis ng silindro sa bilis ng daloy mula sa bomba.
A blocked filter reduced the flow rate to the cooler.


