Lumaktaw sa nilalaman

Aralin 10/10 · 15 salita · 0 natutunan

Electrical safety

Kaligtasan sa kuryente

  1. 1

    electric shock(noun)

    /ɪˈlektrɪk ʃɑːk/

    pagkakuryente, pagkabigla sa kuryente

    the injury or sudden pain caused when electric current passes through a person's body

    He received an electric shock from a damaged extension lead.

    Nakuryente siya mula sa sirang extension cord.

    RCDs greatly reduce the risk of a fatal electric shock.

    Kasingkahuluganelectrical shockelectrocutionjolt
    Kasalungatnone
  2. 2

    electrocution(noun)

    /ɪˌlektrəˈkjuːʃn/

    pagkakuryente, pagkamatay sa kuryente

    death or serious injury caused by electric current passing through the body

    Working near overhead lines without a permit risks electrocution.

    Ang pagtatrabaho malapit sa mga linya ng kuryente sa itaas nang walang permiso ay may panganib ng pagkakuryente.

    The investigation found that the electrocution was caused by a missing earth.

    Kasingkahuluganelectric shockelectrocution
    Kasalungatrevivalresuscitation
  3. 3

    lockout/tagout(noun)

    /lɑːkaʊt/ˈtæɡaʊt/

    lockout/tagout, LOTO, pagkandado at pagtatak

    a safety procedure where a machine's energy sources are switched off, locked and tagged before maintenance work

    Apply lockout/tagout before you put your hands inside the machine.

    Isagawa ang lockout/tagout bago ipasok ang iyong mga kamay sa loob ng makina.

    Every maintenance technician has a personal lock for lockout/tagout.

    KasingkahuluganControl of Hazardous EnergyEnergy Isolation
    KasalungatActivationEnergization
  4. 4

    earthing(noun)

    /ˈɜːθɪŋ/

    grawnding, pagkakabit sa lupa

    connecting metal parts of an installation to the ground so that fault current flows safely away

    Good earthing makes sure the breaker trips quickly during a fault.

    Tinitiyak ng mahusay na grawnding na mabilis mag-trip ang breaker kapag may sira.

    Check the earthing of all metal cable trays before handover.

  5. 5

    equipotential bonding(noun)

    /ˌekwipəˈtenʃl ˈbɒndɪŋ/

    ekwipotensyal na pagdurugtong

    connecting exposed metal parts and pipes together so they stay at the same voltage and cannot cause a shock

    Equipotential bonding is required for the water and gas pipes.

    Kailangan ang ekwipotensyal na pagdurugtong para sa mga tubo ng tubig at gas.

    The bathroom failed inspection because the equipotential bonding was missing.

  6. 6

    live(adjective)

    /laɪv/

    may kuryente, enerhisado

    connected to a source of electricity and able to give a shock

    Treat every conductor as live until you have tested it.

    Ituring na may kuryente ang bawat konduktor hangga't hindi mo ito nasusubok.

    Live working is allowed only with a special permit and trained staff.

  7. 7

    de-energise(verb)

    /diː ˈenədʒaɪz/

    patayin ang kuryente, putulin ang suplay

    to disconnect equipment or a circuit from its power supply so that it is no longer live

    De-energise the panel and prove it dead before removing any covers.

    Putulin ang suplay ng kuryente sa panel at patunayang patay ito bago magtanggal ng anumang takip.

    The feeder was de-energised for six hours during the maintenance work.

  8. 8

    safe isolation(noun)

    /ˌseɪf ˌaɪsəˈleɪʃn/

    ligtas na pagbubukod ng kuryente

    the procedure of switching off, locking off and testing equipment to prove it is dead before work starts

    Follow the safe isolation procedure before working on any circuit.

    Sundin ang pamamaraan ng ligtas na pagbubukod ng kuryente bago gumawa sa anumang sirkito.

    Safe isolation includes testing your voltage tester on a known live source.

  9. 9

    permit to work(noun)

    /ˌpɜːmɪt tə ˈwɜːk/

    permiso sa paggawa, pahintulot sa trabaho

    a written approval that states what work may be done, the hazards and the safety steps that must be taken

    No one may open the switchgear without a signed permit to work.

    Walang sinuman ang maaaring magbukas ng switchgear nang walang nilagdaang permiso sa paggawa.

    The permit to work lists the isolation points and earthing locations.

  10. 10

    arc flash(noun)

    /ˈɑːk flæʃ/

    pagsiklab ng arko, pagsabog ng kuryente

    a sudden explosion of heat and light caused by a fault current jumping through the air between conductors

    Wear an arc flash suit when racking out the breaker.

    Magsuot ng kasuotang pananggalang laban sa pagsiklab ng arko kapag inilalabas ang breaker mula sa kinalalagyan nito.

    An arc flash can cause severe burns even several metres away.

  11. 11

    insulated gloves(noun)

    /ˌɪnsjuleɪtɪd ˈɡlʌvz/

    guwantes na insulado, guwantes na pang-elektrisyan

    rubber gloves rated for a certain voltage that protect the hands from electric shock

    Inspect your insulated gloves for holes before every use.

    Suriin kung may butas ang iyong guwantes na insulado bago ito gamitin sa bawat pagkakataon.

    Insulated gloves must be tested in a lab every six months.

  12. 12

    high voltage(noun)

    /ˌhaɪ ˈvəʊltɪdʒ/

    mataas na boltahe, mataas na tensiyon

    voltage high enough to need special equipment and training, usually above 1,000 volts AC

    Only authorised persons may work on high voltage equipment.

    Ang mga awtorisadong tao lamang ang maaaring magtrabaho sa kagamitang may mataas na boltahe.

    Danger signs warn of high voltage on the transformer fence.

  13. 13

    low voltage(noun)

    /ˌləʊ ˈvəʊltɪdʒ/

    mababang boltahe, mababang tensiyon

    voltage used in ordinary buildings and machines, usually up to 1,000 volts AC

    The low voltage side of the transformer supplies the main switchboard.

    Ang panig ng mababang boltahe ng transformer ang nagsusuplay sa pangunahing switchboard.

    She is qualified to work on low voltage installations up to 1,000 volts.

  14. 14

    double insulation(noun)

    /ˌdʌbl ˌɪnsjuˈleɪʃn/

    dobleng insulasyon, dobleng pagkakabukod

    a design with two layers of insulation so that a tool or appliance needs no earth connection

    Power tools with double insulation have a square-in-a-square symbol.

    Ang mga power tool na may dobleng insulasyon ay may simbolong parisukat sa loob ng parisukat.

    Double insulation protects the user even if one layer fails.

  15. 15

    earth leakage(noun)

    /ˌɜːθ ˈliːkɪdʒ/

    tagas ng kuryente sa lupa, pagtagas sa lupa

    a small current that flows to earth through damaged insulation instead of returning through the neutral

    Moisture in the cable caused earth leakage and tripped the RCD.

    Ang halumigmig sa kable ay nagdulot ng tagas ng kuryente sa lupa at nagpa-trip sa RCD.

    The earth leakage relay alarms at 300 milliamps on the main feeder.