Aralin 9/10 · 15 salita · 0 natutunan
Measurement and fault finding
Pagsukat at paghahanap ng sira
kalibrahin, i-kalibra
to check and adjust a measuring instrument so that its readings are accurate
All test instruments must be calibrated once a year.
Dapat kalibrahin minsan sa isang taon ang lahat ng instrumentong pansubok.
The pressure transmitter was calibrated before the system was started.
KasingkahuluganadjusttunecorrectstandardizesetKasalungatunbalancemisadjustdistortosiloskopyo, oscilloscope
an instrument that shows how a voltage changes over time as a waveform on a screen
The oscilloscope showed noise on the encoder signal.
Ipinakita ng osiloskopyo ang ingay sa signal ng encoder.
Use an isolated oscilloscope probe when measuring the drive output.
Kasingkahuluganscopewaveform monitorKasalungatN/Atukuyin at ayusin ang problema, lutasin ang sira
to find the cause of a technical problem and fix it, usually by checking possible causes one by one
The technician spent an hour troubleshooting the Wi-Fi in the meeting room.
Isang oras na nilutas ng technician ang problema sa Wi-Fi sa silid-pulungan.
Follow these steps to troubleshoot common login problems.
KasingkahulugandiagnosefixresolvedebugKasalungatignoreneglectmultimetro
a handheld meter that measures voltage, current and resistance, and can test continuity
Set the multimeter to AC volts before checking the socket.
Itakda ang multimetro sa AC volts bago suriin ang saksakan.
Every technician carries a digital multimeter in the tool bag.
klamp metro, metrong pang-ipit
a meter with jaws that close around a single wire to measure current without disconnecting it
Use a clamp meter to check the current on each phase of the motor.
Gumamit ng klamp metro para suriin ang kuryente sa bawat phase ng motor.
Clamp only one conductor, or the clamp meter will read zero.
megohmmetro, tagasubok ng resistensya ng insulasyon
an instrument that applies a high test voltage to measure how well cable or winding insulation prevents leakage
Test the motor with an insulation resistance tester at 500 volts.
Subukan ang motor gamit ang megohmmetro sa 500 volts.
Disconnect the electronics before using the insulation resistance tester on the cable.
tagasukat ng resistensya ng grawnding
an instrument used to measure the resistance between an earth electrode and the surrounding ground
The earth resistance tester showed 2 ohms, which meets the requirement.
Nagpakita ang tagasukat ng resistensya ng grawnding ng 2 ohms, na pasok sa kinakailangan.
Drive the test spikes into the soil before using the earth resistance tester.
kawad na pansubok, probe
an insulated wire with a probe or clip that connects a meter to the circuit being measured
Replace any test lead with cracked insulation before you use the meter.
Palitan ang anumang kawad na pansubok na may bitak ang insulasyon bago gamitin ang metro.
Plug the red test lead into the volts socket of the meter.
pagsubok ng kontinuwidad
a test that checks whether a conductor or circuit forms a complete path with no breaks
Do a continuity test on the earth conductor before energising the board.
Magsagawa ng pagsubok ng kontinuwidad sa konduktor ng grawnding bago bigyan ng kuryente ang board.
The continuity test showed a broken wire inside the trailing cable.
termal na pag-imahen, pag-imahen ng init
the use of a special camera that shows heat, to find hot connections and overloaded parts
A thermal imaging survey found three loose busbar joints.
Natuklasan ng isang survey gamit ang termal na pag-imahen ang tatlong maluwag na dugtungan ng busbar.
We do thermal imaging of all main panels every six months.
komisyoning, pagsubok bago ipasa
the process of testing and checking new electrical equipment to prove it works correctly before handover
Commissioning of the new switchboard is planned for next Tuesday.
Nakaplano sa susunod na Martes ang komisyoning ng bagong switchboard.
All test results must be recorded in the commissioning report.
pagtagas ng kuryente sa lupa, sira sa grawnding
a fault where a live conductor accidentally touches earth or a metal part connected to earth
An earth fault in the outdoor light tripped the RCD.
Ang pagtagas ng kuryente sa lupa sa ilaw sa labas ang nagpa-trip sa RCD.
The relay detected an earth fault on feeder number four.
mag-trip, kusang pumutol ng kuryente
of a breaker or protection device: to switch off automatically because it detects a fault or overload
The RCD in the outdoor lighting board keeps tripping whenever it rains.
Laging nagtri-trip ang RCD sa board ng ilaw sa labas tuwing umuulan.
The overload relay tripped because the pump was blocked.
maluwag na koneksyon, maluwag na dugtong
a terminal or joint that is not tight, which can cause heat, sparking or an intermittent fault
A loose connection at the terminal caused the cable to burn.
Ang maluwag na koneksyon sa terminal ang naging sanhi ng pagkasunog ng kable.
Most intermittent faults in panels are caused by a loose connection.
