Skip to content

Lesson 1/10 · 15 words · 0 learned

Materials and properties

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    Check the material certificate to confirm the alloy grade before machining.

    Synonymsamalgamblendcompositemixturecompound
    Antonymspure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    Cast iron machine beds absorb vibration and keep the lathe stable.

    Synonymspig irongray iron
    Antonymssteelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    The inspector found heavy corrosion on the bottom of the tank.

    Synonymsrustingdecayerosiondeterioration
    Antonymsprotectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    Welding can reduce the ductility of the metal near the joint.

    Synonymsmalleabilitypliabilityflexibility
    Antonymsbrittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    The lab ran a hardness test on three samples from each batch.

    Synonymsstrengthfirmnessrigiditytoughness
    Antonymssoftnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    Use a separate grinding disc for stainless steel to avoid contamination.

    Synonymscorrosion-resistant steelinox steel
    Antonymscarbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    The drawing specifies tempering at 200 degrees for two hours.