Vai al contenuto

Lezione 1/10 · 15 parole · 0 imparate

Materials and properties

Materiali e proprietà meccaniche

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    lega

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    L'ingegnere ha scelto una lega leggera di alluminio per il braccio del robot.

    Check the material certificate to confirm the alloy grade before machining.

    Sinonimiamalgamblendcompositemixturecompound
    Contraripure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    ghisa

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    Il corpo della pompa è in ghisa, quindi non si può saldare facilmente.

    Cast iron machine beds absorb vibration and keep the lathe stable.

    Sinonimipig irongray iron
    Contraristeelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    corrosione

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    La zincatura protegge dalla corrosione il telaio in acciaio esposto all'esterno.

    The inspector found heavy corrosion on the bottom of the tank.

    Sinonimirustingdecayerosiondeterioration
    Contrariprotectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    duttilità

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    Il rame ha un'eccellente duttilità, per cui può essere trafilato in fili sottili.

    Welding can reduce the ductility of the metal near the joint.

    Sinonimimalleabilitypliabilityflexibility
    Contraribrittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    durezza

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    Dopo il trattamento termico, i denti dell'ingranaggio hanno raggiunto una durezza di 58 HRC.

    The lab ran a hardness test on three samples from each batch.

    Sinonimistrengthfirmnessrigiditytoughness
    Contrarisoftnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    acciaio inossidabile, acciaio inox

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    Le macchine per la lavorazione alimentare sono di solito costruite in acciaio inox 304.

    Use a separate grinding disc for stainless steel to avoid contamination.

    Sinonimicorrosion-resistant steelinox steel
    Contraricarbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    acciaio al carbonio

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    Le staffe sono realizzate in acciaio a basso tenore di carbonio perché devono essere piegate a freddo.

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    resistenza a trazione, carico di rottura

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    Questi bulloni hanno una resistenza a trazione di 800 megapascal.

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    limite di snervamento, tensione di snervamento

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    L'albero non deve mai essere caricato oltre il suo limite di snervamento.

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    tenacità, resilienza

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    Il rinvenimento migliora la tenacità dello scalpello temprato.

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    fatica del metallo, fatica dei materiali

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    La staffa ha ceduto per fatica del metallo dopo milioni di cicli di vibrazione.

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    trattamento termico

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    Gli ingranaggi vengono inviati al trattamento termico prima della rettifica finale.

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    ricottura

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    La ricottura ammorbidisce l'acciaio, così possiamo lavorarlo più facilmente.

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    tempra

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    La tempra in olio riduce il rischio di cricche rispetto a quella in acqua.

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    rinvenimento

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    Senza rinvenimento, la lama temprata sarebbe troppo fragile per essere utilizzata.

    The drawing specifies tempering at 200 degrees for two hours.