Langkau ke kandungan

Pelajaran 1/10 · 15 perkataan · 0 sudah dipelajari

Materials and properties

Bahan dan sifatnya

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    aloi

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    Jurutera itu memilih aloi aluminium yang ringan untuk lengan robot tersebut.

    Check the material certificate to confirm the alloy grade before machining.

    Sinonimamalgamblendcompositemixturecompound
    Antonimpure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    besi tuang

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    Perumah pam itu diperbuat daripada besi tuang, jadi sukar dikimpal.

    Cast iron machine beds absorb vibration and keep the lathe stable.

    Sinonimpig irongray iron
    Antonimsteelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    kakisan

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    Penggalvanian melindungi rangka keluli daripada kakisan di luar bangunan.

    The inspector found heavy corrosion on the bottom of the tank.

    Sinonimrustingdecayerosiondeterioration
    Antonimprotectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    kemuluran

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    Kuprum mempunyai kemuluran yang sangat baik, jadi ia boleh ditarik menjadi dawai yang nipis.

    Welding can reduce the ductility of the metal near the joint.

    Sinonimmalleabilitypliabilityflexibility
    Antonimbrittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    kekerasan, kekerasan bahan

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    Selepas rawatan haba, gigi gear mencapai kekerasan 58 HRC.

    The lab ran a hardness test on three samples from each batch.

    Sinonimstrengthfirmnessrigiditytoughness
    Antonimsoftnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    keluli tahan karat, keluli nirkarat

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    Mesin pemprosesan makanan biasanya dibina daripada keluli tahan karat 304.

    Use a separate grinding disc for stainless steel to avoid contamination.

    Sinonimcorrosion-resistant steelinox steel
    Antonimcarbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    keluli karbon

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    Braket itu diperbuat daripada keluli karbon rendah kerana perlu dilentur dalam keadaan sejuk.

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    kekuatan tegangan, kekuatan tensil

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    Bolt ini mempunyai kekuatan tegangan 800 megapascal.

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    kekuatan alah

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    Aci itu tidak boleh sekali-kali dibebani melebihi kekuatan alahnya.

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    keliatan

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    Penyepuhan meningkatkan keliatan penukul pahat yang telah dikeraskan.

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    kelesuan logam, lesu logam

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    Braket itu gagal akibat kelesuan logam selepas berjuta kitaran getaran.

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    rawatan haba

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    Gear itu dihantar untuk rawatan haba sebelum pengisaran akhir.

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    penyepuhlindapan, sepuh lindap

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    Penyepuhlindapan melembutkan keluli supaya kami dapat memesinnya dengan lebih mudah.

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    pelindapkejutan, lindap kejut

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    Pelindapkejutan dalam minyak mengurangkan risiko keretakan berbanding air.

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    penyepuhan

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    Tanpa penyepuhan, bilah yang telah dikeraskan itu terlalu rapuh untuk digunakan.

    The drawing specifies tempering at 200 degrees for two hours.