레슨 1/10 · 15단어 · 외운 단어 0
Materials and properties
재료와 기계적 성질
합금
a metal made by mixing two or more metals, or a metal and another element, to improve its properties
The engineer chose a lightweight aluminium alloy for the robot arm.
엔지니어는 로봇 팔에 가벼운 알루미늄 합금을 선택했다.
Check the material certificate to confirm the alloy grade before machining.
유의어amalgamblendcompositemixturecompound반의어pure elementsingle metal주철
a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould
The pump housing is cast iron, so it cannot be welded easily.
펌프 하우징은 주철이라 용접하기 어렵다.
Cast iron machine beds absorb vibration and keep the lathe stable.
유의어pig irongray iron반의어steelwrought iron부식
the slow damage of metal by chemical reaction with water, air or chemicals, for example rust
Galvanising protects the steel frame from corrosion outdoors.
아연 도금은 강철 프레임이 야외에서 부식되는 것을 막아 줍니다.
The inspector found heavy corrosion on the bottom of the tank.
유의어rustingdecayerosiondeterioration반의어protectionpreservationconservation연성
the ability of a material to be stretched or bent a lot without breaking
Copper has excellent ductility, so it can be drawn into thin wire.
구리는 연성이 뛰어나 가는 전선으로 뽑아낼 수 있습니다.
Welding can reduce the ductility of the metal near the joint.
유의어malleabilitypliabilityflexibility반의어brittlenessrigidity경도, 경도값
how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale
After heat treatment, the gear teeth reached a hardness of 58 HRC.
열처리 후 기어 이의 경도가 58 HRC에 도달했다.
The lab ran a hardness test on three samples from each batch.
유의어strengthfirmnessrigiditytoughness반의어softnessweaknessgentleness스테인리스강, 스테인리스 스틸
steel containing chromium, which protects it from rust and corrosion
Food processing machines are usually built from 304 stainless steel.
식품 가공 기계는 보통 304 스테인리스강으로 제작됩니다.
Use a separate grinding disc for stainless steel to avoid contamination.
유의어corrosion-resistant steelinox steel반의어carbon steelrustable steel탄소강
steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend
The brackets are made from low-carbon steel because they need to be bent cold.
브래킷은 냉간 굽힘 가공이 필요하므로 저탄소강으로 만듭니다.
Carbon steel parts must be painted or oiled to stop them rusting in storage.
항복 강도, 항복 응력
the stress at which a material starts to bend or stretch permanently and will not return to its shape
The shaft must never be loaded beyond its yield strength.
축에는 항복 강도를 넘는 하중을 절대 가해서는 안 된다.
Designers use the yield strength, not the breaking strength, to set safety factors.
금속 피로, 피로 파괴
the gradual weakening and cracking of metal caused by repeated loading and unloading over time
The bracket failed from metal fatigue after millions of vibration cycles.
브래킷은 수백만 번의 진동 사이클 후 금속 피로로 파손되었다.
Sharp corners increase the risk of metal fatigue in rotating shafts.
