İçeriğe geç

Ders 1/10 · 15 kelime · Öğrenilen: 0

Materials and properties

Malzemeler ve özellikleri

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    alaşım

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    Mühendis, robot kolu için hafif bir alüminyum alaşımı seçti.

    Check the material certificate to confirm the alloy grade before machining.

    Eş anlamlılaramalgamblendcompositemixturecompound
    Zıt anlamlılarpure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    dökme demir

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    Pompa gövdesi dökme demirden yapılmıştır, bu yüzden kolayca kaynak yapılamaz.

    Cast iron machine beds absorb vibration and keep the lathe stable.

    Eş anlamlılarpig irongray iron
    Zıt anlamlılarsteelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    korozyon, paslanma, aşınma

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    Galvanizleme, çelik iskeleti açık havada korozyondan korur.

    The inspector found heavy corrosion on the bottom of the tank.

    Eş anlamlılarrustingdecayerosiondeterioration
    Zıt anlamlılarprotectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    sünek olma, süneklik

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    Bakırın sünekliği mükemmeldir, bu yüzden ince tel haline getirilebilir.

    Welding can reduce the ductility of the metal near the joint.

    Eş anlamlılarmalleabilitypliabilityflexibility
    Zıt anlamlılarbrittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    sertlik

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    Isıl işlemden sonra dişli dişleri 58 HRC sertliğe ulaştı.

    The lab ran a hardness test on three samples from each batch.

    Eş anlamlılarstrengthfirmnessrigiditytoughness
    Zıt anlamlılarsoftnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    paslanmaz çelik, inox

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    Gıda işleme makineleri genellikle 304 paslanmaz çelikten yapılır.

    Use a separate grinding disc for stainless steel to avoid contamination.

    Eş anlamlılarcorrosion-resistant steelinox steel
    Zıt anlamlılarcarbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    karbon çeliği, karbonlu çelik

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    Braketler soğuk bükülmeleri gerektiği için düşük karbonlu çelikten yapılmıştır.

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    çekme dayanımı, çekme mukavemeti

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    Bu cıvataların çekme dayanımı 800 megapaskaldır.

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    akma dayanımı, akma sınırı

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    Mil, akma dayanımının ötesinde asla yüklenmemelidir.

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    tokluk

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    Menevişleme, sertleştirilmiş keskinin tokluğunu artırır.

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    metal yorulması, yorulma

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    Braket, milyonlarca titreşim çevriminden sonra metal yorulması nedeniyle hasar gördü.

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    ısıl işlem

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    Dişliler, son taşlamadan önce ısıl işleme gönderilir.

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    tavlama

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    Tavlama çeliği yumuşatır, böylece daha kolay işleyebiliriz.

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    su verme, ani soğutma

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    Yağda su verme, suya kıyasla çatlama riskini azaltır.

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    menevişleme, meneviş

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    Menevişleme yapılmazsa sertleştirilmiş bıçak kullanılamayacak kadar gevrek olur.

    The drawing specifies tempering at 200 degrees for two hours.