पाठ 1/10 · 15 शब्द · 0 याद हो गए
Materials and properties
सामग्री और उनके गुण
मिश्रधातु, मिश्र धातु
a metal made by mixing two or more metals, or a metal and another element, to improve its properties
The engineer chose a lightweight aluminium alloy for the robot arm.
इंजीनियर ने रोबोट आर्म के लिए हल्की ऐल्युमिनियम मिश्रधातु चुनी।
Check the material certificate to confirm the alloy grade before machining.
समानार्थीamalgamblendcompositemixturecompoundविलोमpure elementsingle metalढलवाँ लोहा, कच्चा लोहा
a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould
The pump housing is cast iron, so it cannot be welded easily.
पंप का हाउसिंग ढलवाँ लोहे का है, इसलिए उसकी वेल्डिंग आसानी से नहीं की जा सकती।
Cast iron machine beds absorb vibration and keep the lathe stable.
समानार्थीpig irongray ironविलोमsteelwrought ironसंक्षारण, क्षरण
the slow damage of metal by chemical reaction with water, air or chemicals, for example rust
Galvanising protects the steel frame from corrosion outdoors.
गैल्वनाइज़ेशन बाहर खुले में स्टील के ढाँचे को संक्षारण से बचाता है।
The inspector found heavy corrosion on the bottom of the tank.
समानार्थीrustingdecayerosiondeteriorationविलोमprotectionpreservationconservationतन्यता, तन्यता गुण
the ability of a material to be stretched or bent a lot without breaking
Copper has excellent ductility, so it can be drawn into thin wire.
तांबे में उत्कृष्ट तन्यता होती है, इसलिए उसे खींचकर पतले तार बनाए जा सकते हैं।
Welding can reduce the ductility of the metal near the joint.
समानार्थीmalleabilitypliabilityflexibilityविलोमbrittlenessrigidityकठोरता, कड़ापन
how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale
After heat treatment, the gear teeth reached a hardness of 58 HRC.
ताप उपचार के बाद गियर के दाँतों की कठोरता 58 HRC तक पहुँच गई।
The lab ran a hardness test on three samples from each batch.
समानार्थीstrengthfirmnessrigiditytoughnessविलोमsoftnessweaknessgentlenessस्टेनलेस स्टील, जंगरोधी इस्पात
steel containing chromium, which protects it from rust and corrosion
Food processing machines are usually built from 304 stainless steel.
खाद्य प्रसंस्करण मशीनें आमतौर पर 304 स्टेनलेस स्टील से बनाई जाती हैं।
Use a separate grinding disc for stainless steel to avoid contamination.
समानार्थीcorrosion-resistant steelinox steelविलोमcarbon steelrustable steelकार्बन स्टील, कार्बन इस्पात
steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend
The brackets are made from low-carbon steel because they need to be bent cold.
ब्रैकेट निम्न-कार्बन स्टील से बने हैं क्योंकि उन्हें ठंडी अवस्था में मोड़ना पड़ता है।
Carbon steel parts must be painted or oiled to stop them rusting in storage.
तनन सामर्थ्य, तन्य शक्ति
the maximum pulling force per unit area that a material can take before it breaks
These bolts have a tensile strength of 800 megapascals.
इन बोल्टों की तनन सामर्थ्य 800 मेगापास्कल है।
We need a steel with higher tensile strength for the lifting hook.
पराभव सामर्थ्य, पराभव प्रतिबल
the stress at which a material starts to bend or stretch permanently and will not return to its shape
The shaft must never be loaded beyond its yield strength.
शाफ्ट पर कभी भी उसकी पराभव सामर्थ्य से अधिक भार नहीं डालना चाहिए।
Designers use the yield strength, not the breaking strength, to set safety factors.
धातु श्रांति, धातु की थकान
the gradual weakening and cracking of metal caused by repeated loading and unloading over time
The bracket failed from metal fatigue after millions of vibration cycles.
लाखों कंपन चक्रों के बाद ब्रैकेट धातु श्रांति के कारण टूट गया।
Sharp corners increase the risk of metal fatigue in rotating shafts.
ऊष्मा उपचार, ताप उपचार
controlled heating and cooling of metal to change properties such as hardness, strength or toughness
The gears are sent out for heat treatment before final grinding.
अंतिम घिसाई से पहले गियरों को ऊष्मा उपचार के लिए बाहर भेजा जाता है।
Heat treatment must be recorded on the material certificate.
अनीलन
heating metal and then cooling it slowly to make it softer and easier to machine or form
Annealing softens the steel so we can machine it more easily.
अनीलन से स्टील नरम हो जाता है, जिससे हम उसे अधिक आसानी से मशीन कर सकते हैं।
The copper tubes need annealing before they can be bent again.
पायन
reheating hardened steel to a lower temperature to reduce brittleness and increase toughness
Without tempering, the hardened blade would be too brittle to use.
पायन के बिना कठोर किया गया ब्लेड इतना भंगुर होगा कि उपयोग के लायक नहीं रहेगा।
The drawing specifies tempering at 200 degrees for two hours.
