ข้ามไปยังเนื้อหา

บทที่ 1/10 · 15 คำ · จำได้แล้ว 0

Materials and properties

วัสดุและสมบัติของวัสดุ

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    โลหะผสม

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    วิศวกรเลือกโลหะผสมอะลูมิเนียมน้ำหนักเบาสำหรับแขนหุ่นยนต์

    Check the material certificate to confirm the alloy grade before machining.

    คำพ้องความหมายamalgamblendcompositemixturecompound
    คำตรงข้ามpure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    เหล็กหล่อ

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    เรือนปั๊มทำจากเหล็กหล่อ จึงเชื่อมได้ยาก

    Cast iron machine beds absorb vibration and keep the lathe stable.

    คำพ้องความหมายpig irongray iron
    คำตรงข้ามsteelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    การกัดกร่อน, การกัดกร่อนของโลหะ

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    การชุบสังกะสีช่วยป้องกันโครงเหล็กจากการกัดกร่อนเมื่อใช้งานกลางแจ้ง

    The inspector found heavy corrosion on the bottom of the tank.

    คำพ้องความหมายrustingdecayerosiondeterioration
    คำตรงข้ามprotectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    ความเหนียว, ความสามารถในการยืดตัว

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    ทองแดงมีความเหนียวสูงมาก จึงสามารถดึงเป็นลวดเส้นเล็กได้

    Welding can reduce the ductility of the metal near the joint.

    คำพ้องความหมายmalleabilitypliabilityflexibility
    คำตรงข้ามbrittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    ความแข็ง, ความแข็งของวัสดุ

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    หลังการอบชุบความร้อน ฟันเฟืองมีความแข็งถึง 58 HRC

    The lab ran a hardness test on three samples from each batch.

    คำพ้องความหมายstrengthfirmnessrigiditytoughness
    คำตรงข้ามsoftnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    สเตนเลส, เหล็กกล้าไร้สนิม

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    เครื่องจักรแปรรูปอาหารมักผลิตจากสเตนเลสเกรด 304

    Use a separate grinding disc for stainless steel to avoid contamination.

    คำพ้องความหมายcorrosion-resistant steelinox steel
    คำตรงข้ามcarbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    เหล็กกล้าคาร์บอน

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    ขายึดทำจากเหล็กกล้าคาร์บอนต่ำ เพราะต้องดัดขณะเย็น

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    ความต้านทานแรงดึง, ความแข็งแรงดึง

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    สลักเกลียวเหล่านี้มีความต้านทานแรงดึง 800 เมกะปาสคาล

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    ความเค้นที่จุดครากของวัสดุ, กำลังครากของวัสดุ

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    ห้ามให้เพลารับภาระเกินกำลังครากของวัสดุโดยเด็ดขาด

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    ความเหนียว, ความเหนียวต่อแรงกระแทก

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    การอบคืนไฟช่วยเพิ่มความเหนียวให้สิ่วที่ผ่านการชุบแข็งแล้ว

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    ความล้าของโลหะ, การล้าตัวของโลหะ

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    ขายึดเสียหายจากความล้าของโลหะหลังจากรับการสั่นสะเทือนนับล้านรอบ

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    การอบชุบความร้อน, การทรีตเมนต์ความร้อน

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    เฟืองจะถูกส่งไปอบชุบความร้อนก่อนการเจียระไนขั้นสุดท้าย

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    การอบอ่อน, การอบอ่อนโลหะ

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    การอบอ่อนทำให้เหล็กกล้านิ่มลง เราจึงกลึงได้ง่ายขึ้น

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    การชุบแข็ง, การquench

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    การชุบแข็งในน้ำมันช่วยลดความเสี่ยงที่จะแตกร้าวเมื่อเทียบกับการชุบในน้ำ

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    การอบคืนตัว, การอบคืนไฟ

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    หากไม่มีการอบคืนตัว ใบมีดที่ผ่านการชุบแข็งจะเปราะเกินกว่าจะใช้งานได้

    The drawing specifies tempering at 200 degrees for two hours.