コンテンツへスキップ

レッスン1/10 · 15語 · 覚えた単語 0

Materials and properties

材料と機械的性質

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    合金

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    エンジニアはロボットアームに軽量なアルミニウム合金を選んだ。

    Check the material certificate to confirm the alloy grade before machining.

    類義語amalgamblendcompositemixturecompound
    対義語pure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    鋳鉄

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    このポンプのハウジングは鋳鉄製なので、溶接が簡単にはできません。

    Cast iron machine beds absorb vibration and keep the lathe stable.

    類義語pig irongray iron
    対義語steelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    腐食, 腐蝕

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    溶融亜鉛めっきは、屋外で鋼製フレームを腐食から守ります。

    The inspector found heavy corrosion on the bottom of the tank.

    類義語rustingdecayerosiondeterioration
    対義語protectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    延性

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    銅は延性に優れているため、細い線に引き伸ばすことができる。

    Welding can reduce the ductility of the metal near the joint.

    類義語malleabilitypliabilityflexibility
    対義語brittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    硬度, 硬さ

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    熱処理後、歯車の歯は58 HRCの硬さに達した。

    The lab ran a hardness test on three samples from each batch.

    類義語strengthfirmnessrigiditytoughness
    対義語softnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    ステンレス鋼, ステンレス

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    食品加工機械は通常、304ステンレス鋼で作られています。

    Use a separate grinding disc for stainless steel to avoid contamination.

    類義語corrosion-resistant steelinox steel
    対義語carbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    炭素鋼

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    ブラケットは冷間で曲げ加工が必要なため、低炭素鋼で作られています。

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    引張強さ, 引張強度

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    これらのボルトの引張強さは800メガパスカルです。

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    降伏応力, 降伏強さ

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    シャフトには降伏応力を超える荷重を決してかけてはならない。

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    靭性, 粘り強さ

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    焼戻しにより、焼入れしたたがねの靭性が向上する。

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    金属疲労

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    そのブラケットは、数百万回の振動サイクルの後、金属疲労で破損した。

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    熱処理

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    歯車は最終研削の前に熱処理に出される。

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    焼なまし, 焼鈍

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    焼なましで鋼が軟らかくなり、切削加工がしやすくなる。

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    焼入れ

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    油焼入れは、水焼入れに比べて割れのリスクが小さい。

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    焼戻し

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    焼戻しをしなければ、焼入れした刃はもろすぎて使えない。

    The drawing specifies tempering at 200 degrees for two hours.