Lumaktaw sa nilalaman

Aralin 1/10 · 15 salita · 0 natutunan

Materials and properties

Mga materyales at katangian

  1. 1

    alloy(noun)

    /ˈælɔɪ/

    haluang metal

    a metal made by mixing two or more metals, or a metal and another element, to improve its properties

    The engineer chose a lightweight aluminium alloy for the robot arm.

    Pumili ang inhinyero ng magaang haluang aluminyo para sa braso ng robot.

    Check the material certificate to confirm the alloy grade before machining.

    Kasingkahuluganamalgamblendcompositemixturecompound
    Kasalungatpure elementsingle metal
  2. 2

    cast iron(noun)

    /ˌkæst ˈaɪərn/

    bakal na hinulma, hierro kolado

    a hard, brittle iron with a high carbon content, shaped by pouring it melted into a mould

    The pump housing is cast iron, so it cannot be welded easily.

    Ang pabahay ng bomba ay yari sa bakal na hinulma, kaya hindi ito madaling i-weld.

    Cast iron machine beds absorb vibration and keep the lathe stable.

    Kasingkahuluganpig irongray iron
    Kasalungatsteelwrought iron
  3. 3

    corrosion(noun)

    /kəˈrəʊʒn/

    kaagnasan, pagkaagnas

    the slow damage of metal by chemical reaction with water, air or chemicals, for example rust

    Galvanising protects the steel frame from corrosion outdoors.

    Pinoprotektahan ng galvanisasyon ang bakal na balangkas laban sa kaagnasan sa labas.

    The inspector found heavy corrosion on the bottom of the tank.

    Kasingkahuluganrustingdecayerosiondeterioration
    Kasalungatprotectionpreservationconservation
  4. 4

    ductility(noun)

    /dʌk'tiliti/

    duktilidad, kakayahang mahatak

    the ability of a material to be stretched or bent a lot without breaking

    Copper has excellent ductility, so it can be drawn into thin wire.

    Napakahusay ng duktilidad ng tanso, kaya maaari itong hilahin bilang manipis na kawad.

    Welding can reduce the ductility of the metal near the joint.

    Kasingkahuluganmalleabilitypliabilityflexibility
    Kasalungatbrittlenessrigidity
  5. 5

    hardness(noun)

    /ˈhɑːrdnəs/

    katigasan, tigas ng materyal

    how well a material resists scratching, denting or wear, often measured on the Rockwell or Brinell scale

    After heat treatment, the gear teeth reached a hardness of 58 HRC.

    Pagkatapos ng heat treatment, umabot sa katigasang 58 HRC ang mga ngipin ng gear.

    The lab ran a hardness test on three samples from each batch.

    Kasingkahuluganstrengthfirmnessrigiditytoughness
    Kasalungatsoftnessweaknessgentleness
  6. 6

    stainless steel(noun)

    /'steinlis stiːl/

    stainless steel, hindi kinakalawang na bakal

    steel containing chromium, which protects it from rust and corrosion

    Food processing machines are usually built from 304 stainless steel.

    Karaniwang yari sa 304 stainless steel ang mga makina sa pagproseso ng pagkain.

    Use a separate grinding disc for stainless steel to avoid contamination.

    Kasingkahulugancorrosion-resistant steelinox steel
    Kasalungatcarbon steelrustable steel
  7. 7

    carbon steel(noun)

    /ˌkɑːbən ˈstiːl/

    asero na karbon, karbon na bakal

    steel whose main alloying element is carbon; more carbon makes it harder but less easy to bend

    The brackets are made from low-carbon steel because they need to be bent cold.

    Gawa sa asero na mababa ang karbon ang mga brasket dahil kailangan itong baluktutin nang malamig.

    Carbon steel parts must be painted or oiled to stop them rusting in storage.

  8. 8

    tensile strength(noun)

    /ˈtensaɪl streŋθ/

    lakas-tensiyon, tibay sa paghila

    the maximum pulling force per unit area that a material can take before it breaks

    These bolts have a tensile strength of 800 megapascals.

    Ang mga bolt na ito ay may lakas-tensiyon na 800 megapascal.

    We need a steel with higher tensile strength for the lifting hook.

  9. 9

    yield strength(noun)

    /ˈjiːld streŋθ/

    lakas ng pagbigay, yield strength

    the stress at which a material starts to bend or stretch permanently and will not return to its shape

    The shaft must never be loaded beyond its yield strength.

    Hindi dapat kailanman lagyan ng karga ang baras nang higit sa lakas ng pagbigay nito.

    Designers use the yield strength, not the breaking strength, to set safety factors.

  10. 10

    toughness(noun)

    /ˈtʌfnəs/

    katigasan sa impact, tibay laban sa pagbasag

    the ability of a material to absorb energy and resist cracking when it is hit or suddenly loaded

    Tempering improves the toughness of the hardened chisel.

    Pinapabuti ng tempering ang tibay laban sa pagbasag ng pinatigas na pait.

    The impact test showed poor toughness at low temperatures.

  11. 11

    metal fatigue(noun)

    /ˌmetl fəˈtiːɡ/

    pagkapagod ng metal

    the gradual weakening and cracking of metal caused by repeated loading and unloading over time

    The bracket failed from metal fatigue after millions of vibration cycles.

    Nabigo ang bracket dahil sa pagkapagod ng metal matapos ang milyun-milyong siklo ng pag-vibrate.

    Sharp corners increase the risk of metal fatigue in rotating shafts.

  12. 12

    heat treatment(noun)

    /ˈhiːt triːtmənt/

    heat treatment, paggamot sa init

    controlled heating and cooling of metal to change properties such as hardness, strength or toughness

    The gears are sent out for heat treatment before final grinding.

    Ipinapadala ang mga gear para sa heat treatment bago ang huling paggiling.

    Heat treatment must be recorded on the material certificate.

  13. 13

    annealing(noun)

    /əˈniːlɪŋ/

    annealing, pagpapalambot sa init

    heating metal and then cooling it slowly to make it softer and easier to machine or form

    Annealing softens the steel so we can machine it more easily.

    Pinalalambot ng annealing ang bakal upang mas madali natin itong ma-machine.

    The copper tubes need annealing before they can be bent again.

  14. 14

    quenching(noun)

    /ˈkwentʃɪŋ/

    quenching, mabilis na pagpapalamig

    cooling hot metal very quickly in water, oil or air to make it hard

    Quenching in oil reduces the risk of cracking compared with water.

    Mas nababawasan ang panganib ng pagbitak kapag sa langis ginawa ang quenching kaysa sa tubig.

    The parts are heated to 850 degrees before quenching.

  15. 15

    tempering(noun)

    /ˈtempərɪŋ/

    tempering, pagpapatigas na may pagpapalambot

    reheating hardened steel to a lower temperature to reduce brittleness and increase toughness

    Without tempering, the hardened blade would be too brittle to use.

    Kung walang tempering, magiging napakarupok ng pinatigas na talim para magamit.

    The drawing specifies tempering at 200 degrees for two hours.