Aller au contenu

Leçon 10/10 · 16 mots · 0 appris

Maintenance and troubleshooting

Maintenance et dépannage

  1. 1

    breakdown(noun)

    /ˈbreɪkdaʊn/

    panne

    a sudden failure of a machine or vehicle so that it stops working

    A breakdown of the main compressor stopped the whole line.

    Une panne du compresseur principal a arrêté toute la ligne.

    Report every breakdown in the maintenance system with the cause.

    Synonymesfailuremalfunctioncollapserupturedeterioration
    Antonymesrepairfiximprovementconstructionstability
  2. 2

    downtime(noun)

    /ˈdaʊntaɪm/

    temps d'arrêt, indisponibilité, downtime

    the time during which a computer system or machine is not working or not available

    Every hour of downtime costs the online shop thousands of dollars.

    Chaque heure d'indisponibilité coûte des milliers de dollars à la boutique en ligne.

    The upgrade will cause about thirty minutes of downtime.

    Synonymesidle timestandstillinactivitynon-operational period
    Antonymesuptimeoperationactivity
  3. 3

    lubrication(noun)

    /ˌluːbrɪˈkeɪʃn/

    lubrification, graissage

    putting oil or grease on moving parts to reduce friction, wear and heat

    Poor lubrication is the most common cause of bearing failure.

    Une mauvaise lubrification est la cause la plus fréquente de défaillance des roulements.

    Each machine has a lubrication chart showing every grease point.

    Synonymesgreasingoilingslickingcoating
    Antonymesfrictionabrasiongrinding
  4. 4

    overhaul(noun)

    /ˈəʊvərhɔːl/

    révision générale, remise à neuf

    a complete check of a machine in which it is taken apart, repaired and put back together

    The compressor is due for a major overhaul after 40,000 hours.

    Le compresseur doit subir une révision générale après 40 000 heures.

    A full overhaul of the press will take ten working days.

    Synonymesrenovatereconditionrebuildreconstruct
    Antonymesneglectignoremaintain
  5. 5

    troubleshoot(verb)

    /ˈtrʌblʃuːt/

    dépanner, diagnostiquer et résoudre un problème

    to find the cause of a technical problem and fix it, usually by checking possible causes one by one

    The technician spent an hour troubleshooting the Wi-Fi in the meeting room.

    Le technicien a passé une heure à dépanner le Wi-Fi de la salle de réunion.

    Follow these steps to troubleshoot common login problems.

    Synonymesdiagnosefixresolvedebug
    Antonymesignoreneglect
  6. 6

    spare part(noun)

    /sper pɑːrt/

    pièce de rechange, pièce détachée

    a part kept in stock to replace one that breaks or wears out

    Keep critical spare parts such as seals and belts in the store.

    Conservez au magasin les pièces de rechange critiques, comme les joints et les courroies.

    The machine was down for a week waiting for a spare part.

    Synonymesreplacement partcomponentaccessory
    Antonymesprimary partoriginal component
  7. 7

    work order(noun)

    /ˈwɜːk ˌɔːdə(r)/

    bon de travail, demande d'intervention

    a written or electronic request to the engineering department to repair something

    Reception created a work order for the broken shower in room 211.

    La réception a créé un bon de travail pour la douche cassée de la chambre 211.

    Urgent work orders must be completed within one hour.

  8. 8

    preventive maintenance(noun)

    /prɪˌventɪv ˈmeɪntənəns/

    maintenance préventive

    regular planned servicing of machines, such as cleaning and replacing parts, to stop them breaking down

    Preventive maintenance on the presses is done every Saturday.

    La maintenance préventive des presses est effectuée tous les samedis.

    Good preventive maintenance has cut our breakdowns by half.

  9. 9

    predictive maintenance(noun)

    /prɪˌdɪktɪv ˈmeɪntənəns/

    maintenance prédictive

    maintenance based on monitoring the condition of a machine, so parts are replaced just before they fail

    Predictive maintenance uses vibration and temperature data to plan repairs.

    La maintenance prédictive utilise des données de vibration et de température pour planifier les réparations.

    Sensors on the motors support our predictive maintenance programme.

  10. 10

    corrective maintenance(noun)

    /kəˌrektɪv ˈmeɪntənəns/

    maintenance corrective, dépannage

    repair work done after a fault has been found, to bring a machine back to normal operation

    Most of our corrective maintenance is caused by worn belts.

    La plupart de nos opérations de maintenance corrective sont dues à des courroies usées.

    Corrective maintenance costs more than planned work because of lost production.

  11. 11

    wear(noun)

    /weə(r)/

    usure

    damage or loss of material on a surface caused by rubbing and use over time

    Check the guide rails for wear every month.

    Vérifiez l'usure des glissières de guidage tous les mois.

    The chain has reached its wear limit and must be replaced.

  12. 12

    misalignment(noun)

    /ˌmɪsəˈlaɪnmənt/

    désalignement, défaut d'alignement

    the condition when two connected shafts or parts are not in a straight line as they should be

    Misalignment between the motor and pump caused the coupling to fail.

    Le désalignement entre le moteur et la pompe a provoqué la rupture de l'accouplement.

    We use a laser tool to correct shaft misalignment.

  13. 13

    vibration analysis(noun)

    /vaɪˈbreɪʃn ənæləsɪs/

    analyse vibratoire

    measuring and studying the vibration of a machine to find problems such as worn bearings or imbalance

    Vibration analysis showed an outer race defect in the fan bearing.

    L'analyse vibratoire a révélé un défaut de bague extérieure sur le roulement du ventilateur.

    An outside company does vibration analysis on our pumps every quarter.

  14. 14

    root cause analysis(noun)

    /ˌruːt ˈkɔːz ənæləsɪs/

    analyse des causes racines, analyse de cause racine

    a step-by-step method to find the real basic reason for a failure so it does not happen again

    We did a root cause analysis after the third gearbox failure.

    Nous avons réalisé une analyse des causes racines après la troisième panne de réducteur.

    Root cause analysis showed that the wrong oil had been used.

  15. 15

    MTBF(abbreviation)

    /ˌem tiː biː ˈef/

    MTBF, temps moyen entre pannes

    mean time between failures: the average running time of a machine between one breakdown and the next

    Our target is to raise the MTBF of the packing line to 200 hours.

    Notre objectif est de porter le MTBF de la ligne de conditionnement à 200 heures.

    MTBF improved after we changed the lubrication schedule.

  16. 16

    backlash(noun)

    /ˈbæklæʃ/

    jeu entre dents, jeu de denture

    the small amount of free movement between meshing parts, such as gear teeth, before they engage

    Too much backlash in the gearbox causes poor positioning accuracy.

    Un jeu de denture trop important dans le réducteur nuit à la précision de positionnement.

    Measure the backlash with a dial indicator after fitting the new gear.