Lesson 7/10 · 15 words · 0 learned
1
sheet metal(noun)
/ʃiːt ˈmetl/
metal that has been rolled into thin flat pieces, used for covers, panels and boxes
The control box is made of 1.5 mm sheet metal.
Our sheet metal shop can cut, bend and weld small batches.
2
welding(noun)
/'weldi/
joining pieces of metal by heating them until they melt and fuse together
Welding should only be done in the ventilated area.
The welding procedure must be approved before production starts.
3
welder(noun)
/ˈweldə(r)/
a skilled worker whose job is to join metal parts by welding
We need two certified welders for the pressure vessel job.
The welder checked the joint fit-up before striking an arc.
4
arc welding(noun)
/ˈɑːk weldɪŋ/
welding that uses an electric arc between an electrode and the metal to produce the heat
Manual arc welding is still common for repairs on site.
Wear a proper helmet because arc welding produces strong UV light.
5
MIG welding(noun)
/ˈmɪɡ weldɪŋ/
metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas
MIG welding is fast, so we use it for most steel frames.
Check the gas flow before you start MIG welding.
6
TIG welding(noun)
/ˈtɪɡ weldɪŋ/
tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel
The stainless steel pipes are joined by TIG welding.
TIG welding is slower but gives very clean welds.
7
electrode(noun)
/ɪˈlektrəʊd/
a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld
Keep the electrodes in a drying oven so they stay free of moisture.
Use a 3.2 mm electrode for this plate thickness.
8
filler metal(noun)
/ˈfɪlə metl/
metal added during welding or brazing to fill the joint
Choose a filler metal that matches the base material.
The welding procedure lists the approved filler metal.
9
weld bead(noun)
/ˈweld biːd/
the line of metal left on a joint after one pass of welding
The weld bead should be smooth and even with no cracks.
Grind the weld bead flush on the outside of the tank.
10
porosity(noun)
/pɔːˈrɒsəti/
a weld or casting defect made of small holes caused by gas trapped in the metal
Porosity in the weld was caused by too little shielding gas.
The X-ray showed porosity, so the joint must be repaired.
11
distortion(noun)
/dɪˈstɔːʃn/
an unwanted change in the shape of a part caused by the heat of welding or cutting
Tack weld both sides first to reduce distortion.
The long frame showed 3 mm of distortion after welding.
12
press brake(noun)
/ˈpres breɪk/
a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die
The brackets are bent to 90 degrees on the press brake.
Keep your hands clear of the tools when the press brake closes.
13
laser cutting(noun)
/ˈleɪzə kʌtɪŋ/
cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC
Laser cutting gives clean edges with no need for deburring.
We send the DXF files to the supplier for laser cutting.
14
fabrication(noun)
/ˌfæbrɪˈkeɪʃn/
the work of making metal structures and parts by cutting, bending, welding and assembling
The fabrication of the frame will take two weeks.
He manages a steel fabrication shop with thirty workers.
15
brazing(noun)
/ˈbreɪzɪŋ/
joining metals with a melted filler metal, such as brass, without melting the base metals
Copper pipes in the cooling system are joined by brazing.
Brazing uses lower heat than welding, so there is less distortion.