Vai al contenuto

Lezione 7/10 · 15 parole · 0 imparate

Welding and fabrication

Saldatura e carpenteria metallica

  1. 1

    sheet metal(noun)

    /ʃiːt ˈmetl/

    lamiera

    metal that has been rolled into thin flat pieces, used for covers, panels and boxes

    The control box is made of 1.5 mm sheet metal.

    La scatola di comando è realizzata in lamiera da 1,5 mm.

    Our sheet metal shop can cut, bend and weld small batches.

    Sinonimimetal platemetal sheet
    Contraribulk metalsolid metal
  2. 2

    welding(noun)

    /'weldi/

    saldatura

    joining pieces of metal by heating them until they melt and fuse together

    Welding should only be done in the ventilated area.

    La saldatura deve essere eseguita solo nell'area ventilata.

    The welding procedure must be approved before production starts.

    Sinonimifusingsolderingbrazing
    Contrariseparationdisconnectiondetachment
  3. 3

    welder(noun)

    /ˈweldə(r)/

    saldatore

    a skilled worker whose job is to join metal parts by welding

    We need two certified welders for the pressure vessel job.

    Servono due saldatori certificati per il lavoro sul recipiente a pressione.

    The welder checked the joint fit-up before striking an arc.

  4. 4

    arc welding(noun)

    /ˈɑːk weldɪŋ/

    saldatura ad arco

    welding that uses an electric arc between an electrode and the metal to produce the heat

    Manual arc welding is still common for repairs on site.

    La saldatura ad arco manuale è ancora comune per le riparazioni in cantiere.

    Wear a proper helmet because arc welding produces strong UV light.

  5. 5

    MIG welding(noun)

    /ˈmɪɡ weldɪŋ/

    saldatura MIG

    metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas

    MIG welding is fast, so we use it for most steel frames.

    La saldatura MIG è veloce, quindi la usiamo per la maggior parte dei telai in acciaio.

    Check the gas flow before you start MIG welding.

  6. 6

    TIG welding(noun)

    /ˈtɪɡ weldɪŋ/

    saldatura TIG

    tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel

    The stainless steel pipes are joined by TIG welding.

    I tubi in acciaio inossidabile vengono uniti mediante saldatura TIG.

    TIG welding is slower but gives very clean welds.

  7. 7

    electrode(noun)

    /ɪˈlektrəʊd/

    elettrodo

    a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld

    Keep the electrodes in a drying oven so they stay free of moisture.

    Conserva gli elettrodi in un forno di essiccazione in modo che restino privi di umidità.

    Use a 3.2 mm electrode for this plate thickness.

  8. 8

    filler metal(noun)

    /ˈfɪlə metl/

    metallo d'apporto, materiale d'apporto

    metal added during welding or brazing to fill the joint

    Choose a filler metal that matches the base material.

    Scegli un metallo d'apporto compatibile con il materiale base.

    The welding procedure lists the approved filler metal.

  9. 9

    weld bead(noun)

    /ˈweld biːd/

    cordone di saldatura

    the line of metal left on a joint after one pass of welding

    The weld bead should be smooth and even with no cracks.

    Il cordone di saldatura deve essere liscio e uniforme, senza cricche.

    Grind the weld bead flush on the outside of the tank.

  10. 10

    porosity(noun)

    /pɔːˈrɒsəti/

    porosità

    a weld or casting defect made of small holes caused by gas trapped in the metal

    Porosity in the weld was caused by too little shielding gas.

    La porosità nella saldatura è stata causata da una quantità insufficiente di gas di protezione.

    The X-ray showed porosity, so the joint must be repaired.

  11. 11

    distortion(noun)

    /dɪˈstɔːʃn/

    distorsione, deformazione

    an unwanted change in the shape of a part caused by the heat of welding or cutting

    Tack weld both sides first to reduce distortion.

    Esegui prima la puntatura su entrambi i lati per ridurre la distorsione.

    The long frame showed 3 mm of distortion after welding.

  12. 12

    press brake(noun)

    /ˈpres breɪk/

    pressa piegatrice, piegatrice

    a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die

    The brackets are bent to 90 degrees on the press brake.

    Le staffe vengono piegate a 90 gradi sulla pressa piegatrice.

    Keep your hands clear of the tools when the press brake closes.

  13. 13

    laser cutting(noun)

    /ˈleɪzə kʌtɪŋ/

    taglio laser

    cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC

    Laser cutting gives clean edges with no need for deburring.

    Il taglio laser produce bordi puliti senza bisogno di sbavatura.

    We send the DXF files to the supplier for laser cutting.

  14. 14

    fabrication(noun)

    /ˌfæbrɪˈkeɪʃn/

    carpenteria metallica, costruzioni metalliche

    the work of making metal structures and parts by cutting, bending, welding and assembling

    The fabrication of the frame will take two weeks.

    La realizzazione del telaio richiederà due settimane.

    He manages a steel fabrication shop with thirty workers.

  15. 15

    brazing(noun)

    /ˈbreɪzɪŋ/

    brasatura

    joining metals with a melted filler metal, such as brass, without melting the base metals

    Copper pipes in the cooling system are joined by brazing.

    I tubi di rame dell'impianto di raffreddamento vengono uniti mediante brasatura.

    Brazing uses lower heat than welding, so there is less distortion.