Aller au contenu

Leçon 7/10 · 15 mots · 0 appris

Welding and fabrication

Soudage et construction métallique

  1. 1

    sheet metal(noun)

    /ʃiːt ˈmetl/

    tôle

    metal that has been rolled into thin flat pieces, used for covers, panels and boxes

    The control box is made of 1.5 mm sheet metal.

    Le coffret de commande est fabriqué en tôle de 1,5 mm.

    Our sheet metal shop can cut, bend and weld small batches.

    Synonymesmetal platemetal sheet
    Antonymesbulk metalsolid metal
  2. 2

    welding(noun)

    /'weldi/

    soudage, soudure

    joining pieces of metal by heating them until they melt and fuse together

    Welding should only be done in the ventilated area.

    Le soudage ne doit être effectué que dans la zone ventilée.

    The welding procedure must be approved before production starts.

    Synonymesfusingsolderingbrazing
    Antonymesseparationdisconnectiondetachment
  3. 3

    welder(noun)

    /ˈweldə(r)/

    soudeur

    a skilled worker whose job is to join metal parts by welding

    We need two certified welders for the pressure vessel job.

    Nous avons besoin de deux soudeurs certifiés pour le chantier de l'appareil à pression.

    The welder checked the joint fit-up before striking an arc.

  4. 4

    arc welding(noun)

    /ˈɑːk weldɪŋ/

    soudage à l'arc

    welding that uses an electric arc between an electrode and the metal to produce the heat

    Manual arc welding is still common for repairs on site.

    Le soudage à l'arc manuel reste courant pour les réparations sur site.

    Wear a proper helmet because arc welding produces strong UV light.

  5. 5

    MIG welding(noun)

    /ˈmɪɡ weldɪŋ/

    soudage MIG, soudage à l'arc sous gaz inerte

    metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas

    MIG welding is fast, so we use it for most steel frames.

    Le soudage MIG est rapide, nous l'utilisons donc pour la plupart des châssis en acier.

    Check the gas flow before you start MIG welding.

  6. 6

    TIG welding(noun)

    /ˈtɪɡ weldɪŋ/

    soudage TIG, soudage à l'électrode de tungstène

    tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel

    The stainless steel pipes are joined by TIG welding.

    Les tuyaux en acier inoxydable sont assemblés par soudage TIG.

    TIG welding is slower but gives very clean welds.

  7. 7

    electrode(noun)

    /ɪˈlektrəʊd/

    électrode

    a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld

    Keep the electrodes in a drying oven so they stay free of moisture.

    Conservez les électrodes dans une étuve de séchage pour qu'elles restent exemptes d'humidité.

    Use a 3.2 mm electrode for this plate thickness.

  8. 8

    filler metal(noun)

    /ˈfɪlə metl/

    métal d'apport

    metal added during welding or brazing to fill the joint

    Choose a filler metal that matches the base material.

    Choisissez un métal d'apport compatible avec le métal de base.

    The welding procedure lists the approved filler metal.

  9. 9

    weld bead(noun)

    /ˈweld biːd/

    cordon de soudure

    the line of metal left on a joint after one pass of welding

    The weld bead should be smooth and even with no cracks.

    Le cordon de soudure doit être lisse et régulier, sans fissures.

    Grind the weld bead flush on the outside of the tank.

  10. 10

    porosity(noun)

    /pɔːˈrɒsəti/

    porosité, soufflure

    a weld or casting defect made of small holes caused by gas trapped in the metal

    Porosity in the weld was caused by too little shielding gas.

    La porosité de la soudure était due à un manque de gaz de protection.

    The X-ray showed porosity, so the joint must be repaired.

  11. 11

    distortion(noun)

    /dɪˈstɔːʃn/

    déformation, distorsion

    an unwanted change in the shape of a part caused by the heat of welding or cutting

    Tack weld both sides first to reduce distortion.

    Pointez d'abord les deux côtés pour réduire la déformation.

    The long frame showed 3 mm of distortion after welding.

  12. 12

    press brake(noun)

    /ˈpres breɪk/

    presse plieuse, plieuse

    a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die

    The brackets are bent to 90 degrees on the press brake.

    Les supports sont pliés à 90 degrés sur la presse plieuse.

    Keep your hands clear of the tools when the press brake closes.

  13. 13

    laser cutting(noun)

    /ˈleɪzə kʌtɪŋ/

    découpe laser

    cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC

    Laser cutting gives clean edges with no need for deburring.

    La découpe laser donne des bords nets, sans besoin d'ébavurage.

    We send the DXF files to the supplier for laser cutting.

  14. 14

    fabrication(noun)

    /ˌfæbrɪˈkeɪʃn/

    construction métallique, fabrication

    the work of making metal structures and parts by cutting, bending, welding and assembling

    The fabrication of the frame will take two weeks.

    La fabrication du châssis prendra deux semaines.

    He manages a steel fabrication shop with thirty workers.

  15. 15

    brazing(noun)

    /ˈbreɪzɪŋ/

    brasage

    joining metals with a melted filler metal, such as brass, without melting the base metals

    Copper pipes in the cooling system are joined by brazing.

    Les tuyaux en cuivre du système de refroidissement sont assemblés par brasage.

    Brazing uses lower heat than welding, so there is less distortion.