Lumaktaw sa nilalaman

Aralin 7/10 · 15 salita · 0 natutunan

Welding and fabrication

Hinang at fabrication

  1. 1

    sheet metal(noun)

    /ʃiːt ˈmetl/

    sheet metal, plantsang metal

    metal that has been rolled into thin flat pieces, used for covers, panels and boxes

    The control box is made of 1.5 mm sheet metal.

    Ang control box ay gawa sa 1.5 mm na sheet metal.

    Our sheet metal shop can cut, bend and weld small batches.

    Kasingkahuluganmetal platemetal sheet
    Kasalungatbulk metalsolid metal
  2. 2

    welding(noun)

    /'weldi/

    hinang, paghihinang

    joining pieces of metal by heating them until they melt and fuse together

    Welding should only be done in the ventilated area.

    Dapat gawin lamang ang paghihinang sa lugar na may bentilasyon.

    The welding procedure must be approved before production starts.

    Kasingkahuluganfusingsolderingbrazing
    Kasalungatseparationdisconnectiondetachment
  3. 3

    welder(noun)

    /ˈweldə(r)/

    manghihinang, tagahinang

    a skilled worker whose job is to join metal parts by welding

    We need two certified welders for the pressure vessel job.

    Kailangan namin ng dalawang sertipikadong manghihinang para sa trabaho sa sisidlang may presyon.

    The welder checked the joint fit-up before striking an arc.

  4. 4

    arc welding(noun)

    /ˈɑːk weldɪŋ/

    hinang-arko, paghihinang gamit ang arkong elektriko

    welding that uses an electric arc between an electrode and the metal to produce the heat

    Manual arc welding is still common for repairs on site.

    Karaniwan pa rin ang manwal na hinang-arko para sa mga pagkukumpuni sa mismong lugar ng trabaho.

    Wear a proper helmet because arc welding produces strong UV light.

  5. 5

    MIG welding(noun)

    /ˈmɪɡ weldɪŋ/

    hinang MIG, hinang na may gas na pananggalang

    metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas

    MIG welding is fast, so we use it for most steel frames.

    Mabilis ang hinang MIG, kaya ito ang ginagamit namin sa karamihan ng mga balangkas na bakal.

    Check the gas flow before you start MIG welding.

  6. 6

    TIG welding(noun)

    /ˈtɪɡ weldɪŋ/

    hinang TIG, hinang na may elektrod na tungsten

    tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel

    The stainless steel pipes are joined by TIG welding.

    Pinagdudugtong sa pamamagitan ng hinang TIG ang mga tubong hindi kinakalawang na asero.

    TIG welding is slower but gives very clean welds.

  7. 7

    electrode(noun)

    /ɪˈlektrəʊd/

    elektrod, baras na pang-hinang

    a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld

    Keep the electrodes in a drying oven so they stay free of moisture.

    Itago ang mga elektrod sa oven na pantuyo upang manatili itong walang halumigmig.

    Use a 3.2 mm electrode for this plate thickness.

  8. 8

    filler metal(noun)

    /ˈfɪlə metl/

    metal na pampuno, pampunong metal

    metal added during welding or brazing to fill the joint

    Choose a filler metal that matches the base material.

    Pumili ng metal na pampuno na tugma sa pangunahing materyal.

    The welding procedure lists the approved filler metal.

  9. 9

    weld bead(noun)

    /ˈweld biːd/

    guhit ng hinang, hilera ng hinang

    the line of metal left on a joint after one pass of welding

    The weld bead should be smooth and even with no cracks.

    Dapat makinis at pantay ang guhit ng hinang at walang bitak.

    Grind the weld bead flush on the outside of the tank.

  10. 10

    porosity(noun)

    /pɔːˈrɒsəti/

    porosidad, pagkabutas-butas ng hinang

    a weld or casting defect made of small holes caused by gas trapped in the metal

    Porosity in the weld was caused by too little shielding gas.

    Ang porosidad sa hinang ay dulot ng kakulangan ng gas na pananggalang.

    The X-ray showed porosity, so the joint must be repaired.

  11. 11

    distortion(noun)

    /dɪˈstɔːʃn/

    pagkabaluktot, pagbabago ng hugis

    an unwanted change in the shape of a part caused by the heat of welding or cutting

    Tack weld both sides first to reduce distortion.

    Magsagawa muna ng pansamantalang hinang sa magkabilang panig upang mabawasan ang pagkabaluktot.

    The long frame showed 3 mm of distortion after welding.

  12. 12

    press brake(noun)

    /ˈpres breɪk/

    makinang pambaluktot ng lámina, pres na pambaluktot

    a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die

    The brackets are bent to 90 degrees on the press brake.

    Binabaluktot sa 90 digri ang mga bracket sa makinang pambaluktot ng lámina.

    Keep your hands clear of the tools when the press brake closes.

  13. 13

    laser cutting(noun)

    /ˈleɪzə kʌtɪŋ/

    pagputol gamit ang laser, pagputol-laser

    cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC

    Laser cutting gives clean edges with no need for deburring.

    Malinis ang mga gilid sa pagputol gamit ang laser kaya hindi na kailangang alisin ang mga burr.

    We send the DXF files to the supplier for laser cutting.

  14. 14

    fabrication(noun)

    /ˌfæbrɪˈkeɪʃn/

    pabrikasyon, paggawa ng kayariang metal

    the work of making metal structures and parts by cutting, bending, welding and assembling

    The fabrication of the frame will take two weeks.

    Aabutin ng dalawang linggo ang pabrikasyon ng balangkas.

    He manages a steel fabrication shop with thirty workers.

  15. 15

    brazing(noun)

    /ˈbreɪzɪŋ/

    matigas na paghihinang

    joining metals with a melted filler metal, such as brass, without melting the base metals

    Copper pipes in the cooling system are joined by brazing.

    Pinagdudugtong sa pamamagitan ng matigas na paghihinang ang mga tubong tanso sa sistema ng pagpapalamig.

    Brazing uses lower heat than welding, so there is less distortion.