본문으로 건너뛰기

레슨 7/10 · 15단어 · 외운 단어 0

Welding and fabrication

용접과 구조물 제작

  1. 1

    sheet metal(noun)

    /ʃiːt ˈmetl/

    판금, 박판 금속

    metal that has been rolled into thin flat pieces, used for covers, panels and boxes

    The control box is made of 1.5 mm sheet metal.

    제어함은 1.5mm 판금으로 만들어져 있다.

    Our sheet metal shop can cut, bend and weld small batches.

    유의어metal platemetal sheet
    반의어bulk metalsolid metal
  2. 2

    welding(noun)

    /'weldi/

    용접

    joining pieces of metal by heating them until they melt and fuse together

    Welding should only be done in the ventilated area.

    용접은 환기가 되는 구역에서만 해야 한다.

    The welding procedure must be approved before production starts.

    유의어fusingsolderingbrazing
    반의어separationdisconnectiondetachment
  3. 3

    welder(noun)

    /ˈweldə(r)/

    용접공, 용접사

    a skilled worker whose job is to join metal parts by welding

    We need two certified welders for the pressure vessel job.

    압력 용기 작업에는 자격을 갖춘 용접공 두 명이 필요합니다.

    The welder checked the joint fit-up before striking an arc.

  4. 4

    arc welding(noun)

    /ˈɑːk weldɪŋ/

    아크 용접

    welding that uses an electric arc between an electrode and the metal to produce the heat

    Manual arc welding is still common for repairs on site.

    수동 아크 용접은 현장 수리에 여전히 많이 쓰입니다.

    Wear a proper helmet because arc welding produces strong UV light.

  5. 5

    MIG welding(noun)

    /ˈmɪɡ weldɪŋ/

    MIG 용접, 미그 용접

    metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas

    MIG welding is fast, so we use it for most steel frames.

    MIG 용접은 속도가 빨라서 대부분의 강철 프레임에 사용합니다.

    Check the gas flow before you start MIG welding.

  6. 6

    TIG welding(noun)

    /ˈtɪɡ weldɪŋ/

    TIG 용접, 티그 용접

    tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel

    The stainless steel pipes are joined by TIG welding.

    스테인리스강 파이프는 TIG 용접으로 접합합니다.

    TIG welding is slower but gives very clean welds.

  7. 7

    electrode(noun)

    /ɪˈlektrəʊd/

    용접봉, 전극

    a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld

    Keep the electrodes in a drying oven so they stay free of moisture.

    용접봉은 습기가 차지 않도록 건조로에 보관하세요.

    Use a 3.2 mm electrode for this plate thickness.

  8. 8

    filler metal(noun)

    /ˈfɪlə metl/

    용가재, 필러 메탈

    metal added during welding or brazing to fill the joint

    Choose a filler metal that matches the base material.

    모재와 맞는 용가재를 선택하세요.

    The welding procedure lists the approved filler metal.

  9. 9

    weld bead(noun)

    /ˈweld biːd/

    용접 비드, 비드

    the line of metal left on a joint after one pass of welding

    The weld bead should be smooth and even with no cracks.

    용접 비드는 균열 없이 매끄럽고 고르게 형성되어야 합니다.

    Grind the weld bead flush on the outside of the tank.

  10. 10

    porosity(noun)

    /pɔːˈrɒsəti/

    기공

    a weld or casting defect made of small holes caused by gas trapped in the metal

    Porosity in the weld was caused by too little shielding gas.

    용접부의 기공은 보호 가스가 너무 적어서 생긴 것입니다.

    The X-ray showed porosity, so the joint must be repaired.

  11. 11

    distortion(noun)

    /dɪˈstɔːʃn/

    용접 변형, 변형

    an unwanted change in the shape of a part caused by the heat of welding or cutting

    Tack weld both sides first to reduce distortion.

    변형을 줄이려면 먼저 양쪽을 가용접하세요.

    The long frame showed 3 mm of distortion after welding.

  12. 12

    press brake(noun)

    /ˈpres breɪk/

    프레스 브레이크, 절곡기

    a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die

    The brackets are bent to 90 degrees on the press brake.

    브래킷은 프레스 브레이크에서 90도로 절곡합니다.

    Keep your hands clear of the tools when the press brake closes.

  13. 13

    laser cutting(noun)

    /ˈleɪzə kʌtɪŋ/

    레이저 절단, 레이저 커팅

    cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC

    Laser cutting gives clean edges with no need for deburring.

    레이저 절단은 절단면이 깨끗해서 버 제거가 필요 없습니다.

    We send the DXF files to the supplier for laser cutting.

  14. 14

    fabrication(noun)

    /ˌfæbrɪˈkeɪʃn/

    제작, 금속 구조물 제작

    the work of making metal structures and parts by cutting, bending, welding and assembling

    The fabrication of the frame will take two weeks.

    프레임 제작에는 2주가 걸립니다.

    He manages a steel fabrication shop with thirty workers.

  15. 15

    brazing(noun)

    /ˈbreɪzɪŋ/

    브레이징, 경납땜

    joining metals with a melted filler metal, such as brass, without melting the base metals

    Copper pipes in the cooling system are joined by brazing.

    냉각 시스템의 구리 배관은 브레이징으로 접합합니다.

    Brazing uses lower heat than welding, so there is less distortion.