跳至主要內容

第 7/10 課 · 15 個單字 · 已學會 0 個

Welding and fabrication

焊接與金屬加工

  1. 1

    sheet metal(noun)

    /ʃiːt ˈmetl/

    鈑金, 金屬板材

    metal that has been rolled into thin flat pieces, used for covers, panels and boxes

    The control box is made of 1.5 mm sheet metal.

    控制箱是以 1.5 mm 的鈑金製成。

    Our sheet metal shop can cut, bend and weld small batches.

    同義詞metal platemetal sheet
    反義詞bulk metalsolid metal
  2. 2

    welding(noun)

    /'weldi/

    焊接, 熔接

    joining pieces of metal by heating them until they melt and fuse together

    Welding should only be done in the ventilated area.

    焊接作業只能在通風的區域進行。

    The welding procedure must be approved before production starts.

    同義詞fusingsolderingbrazing
    反義詞separationdisconnectiondetachment
  3. 3

    welder(noun)

    /ˈweldə(r)/

    焊工, 銲工, 焊接技師

    a skilled worker whose job is to join metal parts by welding

    We need two certified welders for the pressure vessel job.

    這個壓力容器的工程需要兩名有證照的焊工。

    The welder checked the joint fit-up before striking an arc.

  4. 4

    arc welding(noun)

    /ˈɑːk weldɪŋ/

    電弧焊, 電弧銲接

    welding that uses an electric arc between an electrode and the metal to produce the heat

    Manual arc welding is still common for repairs on site.

    手工電弧焊在現場維修時仍然很常見。

    Wear a proper helmet because arc welding produces strong UV light.

  5. 5

    MIG welding(noun)

    /ˈmɪɡ weldɪŋ/

    MIG 焊接, 金屬惰性氣體保護焊

    metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas

    MIG welding is fast, so we use it for most steel frames.

    MIG 焊接速度快,所以大部分鋼架都用這種方式焊接。

    Check the gas flow before you start MIG welding.

  6. 6

    TIG welding(noun)

    /ˈtɪɡ weldɪŋ/

    TIG 焊接, 鎢極惰性氣體保護焊

    tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel

    The stainless steel pipes are joined by TIG welding.

    這些不鏽鋼管是以 TIG 焊接連接的。

    TIG welding is slower but gives very clean welds.

  7. 7

    electrode(noun)

    /ɪˈlektrəʊd/

    焊條, 電極

    a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld

    Keep the electrodes in a drying oven so they stay free of moisture.

    請將焊條存放在烘箱中,以免受潮。

    Use a 3.2 mm electrode for this plate thickness.

  8. 8

    filler metal(noun)

    /ˈfɪlə metl/

    填充金屬, 焊料, 填料金屬

    metal added during welding or brazing to fill the joint

    Choose a filler metal that matches the base material.

    請選擇與母材相符的填充金屬。

    The welding procedure lists the approved filler metal.

  9. 9

    weld bead(noun)

    /ˈweld biːd/

    焊道, 銲道

    the line of metal left on a joint after one pass of welding

    The weld bead should be smooth and even with no cracks.

    焊道應該平滑均勻,不能有裂紋。

    Grind the weld bead flush on the outside of the tank.

  10. 10

    porosity(noun)

    /pɔːˈrɒsəti/

    氣孔, 孔隙

    a weld or casting defect made of small holes caused by gas trapped in the metal

    Porosity in the weld was caused by too little shielding gas.

    焊道中的氣孔是因為保護氣體不足所造成的。

    The X-ray showed porosity, so the joint must be repaired.

  11. 11

    distortion(noun)

    /dɪˈstɔːʃn/

    焊接變形, 變形

    an unwanted change in the shape of a part caused by the heat of welding or cutting

    Tack weld both sides first to reduce distortion.

    先在兩側進行點焊,以減少變形。

    The long frame showed 3 mm of distortion after welding.

  12. 12

    press brake(noun)

    /ˈpres breɪk/

    折彎機, 摺床, 板金折彎機

    a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die

    The brackets are bent to 90 degrees on the press brake.

    這些支架是在折彎機上彎折成 90 度的。

    Keep your hands clear of the tools when the press brake closes.

  13. 13

    laser cutting(noun)

    /ˈleɪzə kʌtɪŋ/

    雷射切割

    cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC

    Laser cutting gives clean edges with no need for deburring.

    雷射切割的邊緣乾淨,不需要再去毛邊。

    We send the DXF files to the supplier for laser cutting.

  14. 14

    fabrication(noun)

    /ˌfæbrɪˈkeɪʃn/

    金屬加工, 板金製造, 結構製造

    the work of making metal structures and parts by cutting, bending, welding and assembling

    The fabrication of the frame will take two weeks.

    這個框架的製造需要兩週時間。

    He manages a steel fabrication shop with thirty workers.

  15. 15

    brazing(noun)

    /ˈbreɪzɪŋ/

    硬焊, 銅焊

    joining metals with a melted filler metal, such as brass, without melting the base metals

    Copper pipes in the cooling system are joined by brazing.

    冷卻系統中的銅管是用硬焊接合的。

    Brazing uses lower heat than welding, so there is less distortion.