ข้ามไปยังเนื้อหา

บทที่ 7/10 · 15 คำ · จำได้แล้ว 0

Welding and fabrication

การเชื่อมและการประกอบขึ้นรูปโครงสร้าง

  1. 1

    sheet metal(noun)

    /ʃiːt ˈmetl/

    แผ่นโลหะ, โลหะแผ่น

    metal that has been rolled into thin flat pieces, used for covers, panels and boxes

    The control box is made of 1.5 mm sheet metal.

    กล่องควบคุมทำจากแผ่นโลหะหนา 1.5 มม.

    Our sheet metal shop can cut, bend and weld small batches.

    คำพ้องความหมายmetal platemetal sheet
    คำตรงข้ามbulk metalsolid metal
  2. 2

    welding(noun)

    /'weldi/

    การเชื่อม, งานเชื่อมโลหะ

    joining pieces of metal by heating them until they melt and fuse together

    Welding should only be done in the ventilated area.

    ควรทำงานเชื่อมในบริเวณที่มีการระบายอากาศเท่านั้น

    The welding procedure must be approved before production starts.

    คำพ้องความหมายfusingsolderingbrazing
    คำตรงข้ามseparationdisconnectiondetachment
  3. 3

    welder(noun)

    /ˈweldə(r)/

    ช่างเชื่อม, ช่างเชื่อมโลหะ

    a skilled worker whose job is to join metal parts by welding

    We need two certified welders for the pressure vessel job.

    เราต้องการช่างเชื่อมที่ได้รับการรับรองสองคนสำหรับงานถังความดัน

    The welder checked the joint fit-up before striking an arc.

  4. 4

    arc welding(noun)

    /ˈɑːk weldɪŋ/

    การเชื่อมอาร์ก, การเชื่อมไฟฟ้า

    welding that uses an electric arc between an electrode and the metal to produce the heat

    Manual arc welding is still common for repairs on site.

    การเชื่อมอาร์กด้วยมือยังคงเป็นที่นิยมสำหรับงานซ่อมหน้างาน

    Wear a proper helmet because arc welding produces strong UV light.

  5. 5

    MIG welding(noun)

    /ˈmɪɡ weldɪŋ/

    การเชื่อมมิก, การเชื่อม MIG

    metal inert gas welding: arc welding with a wire fed continuously through a gun and protected by gas

    MIG welding is fast, so we use it for most steel frames.

    การเชื่อมมิกทำงานได้รวดเร็ว เราจึงใช้กับโครงเหล็กส่วนใหญ่

    Check the gas flow before you start MIG welding.

  6. 6

    TIG welding(noun)

    /ˈtɪɡ weldɪŋ/

    การเชื่อมทิก, การเชื่อม TIG

    tungsten inert gas welding: precise arc welding with a tungsten electrode and argon gas, often for stainless steel

    The stainless steel pipes are joined by TIG welding.

    ท่อสแตนเลสต่อกันด้วยการเชื่อมทิก

    TIG welding is slower but gives very clean welds.

  7. 7

    electrode(noun)

    /ɪˈlektrəʊd/

    ลวดเชื่อม, อิเล็กโทรด

    a metal rod or wire that carries electric current to make the arc in welding, and often melts into the weld

    Keep the electrodes in a drying oven so they stay free of moisture.

    เก็บลวดเชื่อมไว้ในตู้อบเพื่อไม่ให้ชื้น

    Use a 3.2 mm electrode for this plate thickness.

  8. 8

    filler metal(noun)

    /ˈfɪlə metl/

    โลหะเติม, ลวดเติม

    metal added during welding or brazing to fill the joint

    Choose a filler metal that matches the base material.

    เลือกโลหะเติมที่เข้ากับวัสดุงานหลัก

    The welding procedure lists the approved filler metal.

  9. 9

    weld bead(noun)

    /ˈweld biːd/

    แนวเชื่อม, รอยเชื่อม

    the line of metal left on a joint after one pass of welding

    The weld bead should be smooth and even with no cracks.

    แนวเชื่อมควรเรียบสม่ำเสมอและไม่มีรอยแตกร้าว

    Grind the weld bead flush on the outside of the tank.

  10. 10

    porosity(noun)

    /pɔːˈrɒsəti/

    รูพรุน, ความพรุนในรอยเชื่อม

    a weld or casting defect made of small holes caused by gas trapped in the metal

    Porosity in the weld was caused by too little shielding gas.

    รูพรุนในรอยเชื่อมเกิดจากแก๊สปกคลุมน้อยเกินไป

    The X-ray showed porosity, so the joint must be repaired.

  11. 11

    distortion(noun)

    /dɪˈstɔːʃn/

    การบิดเบี้ยว, ความผิดรูป

    an unwanted change in the shape of a part caused by the heat of welding or cutting

    Tack weld both sides first to reduce distortion.

    เชื่อมจุดทั้งสองด้านก่อนเพื่อลดการบิดเบี้ยว

    The long frame showed 3 mm of distortion after welding.

  12. 12

    press brake(noun)

    /ˈpres breɪk/

    เครื่องพับโลหะแผ่น, เพรสเบรก

    a machine that bends sheet metal into angles and shapes by pressing it between a punch and a die

    The brackets are bent to 90 degrees on the press brake.

    ขายึดถูกพับเป็นมุม 90 องศาด้วยเครื่องพับโลหะแผ่น

    Keep your hands clear of the tools when the press brake closes.

  13. 13

    laser cutting(noun)

    /ˈleɪzə kʌtɪŋ/

    การตัดด้วยเลเซอร์

    cutting metal sheet or plate with a powerful focused laser beam, usually controlled by CNC

    Laser cutting gives clean edges with no need for deburring.

    การตัดด้วยเลเซอร์ให้ขอบที่เรียบสะอาด ไม่ต้องลบคม

    We send the DXF files to the supplier for laser cutting.

  14. 14

    fabrication(noun)

    /ˌfæbrɪˈkeɪʃn/

    งานประดิษฐ์โลหะ, งานโครงสร้างโลหะ

    the work of making metal structures and parts by cutting, bending, welding and assembling

    The fabrication of the frame will take two weeks.

    งานประดิษฐ์โครงนี้จะใช้เวลาสองสัปดาห์

    He manages a steel fabrication shop with thirty workers.

  15. 15

    brazing(noun)

    /ˈbreɪzɪŋ/

    การบรัซซิง, การเชื่อมประสานด้วยทองเหลือง

    joining metals with a melted filler metal, such as brass, without melting the base metals

    Copper pipes in the cooling system are joined by brazing.

    ท่อทองแดงในระบบทำความเย็นต่อกันด้วยการบรัซซิง

    Brazing uses lower heat than welding, so there is less distortion.