सामग्री पर जाएँ

पाठ 2/10 · 15 शब्द · 0 याद हो गए

Hand and power tools

हाथ के औज़ार और विद्युत औज़ार

  1. 1

    pliers(noun)

    /ˈplaɪərz/

    प्लास

    a hand tool with two handles and jaws, used for gripping, bending or cutting wire and small parts

    Use long-nose pliers to fit the spring into the narrow slot.

    स्प्रिंग को संकरे खाँचे में बैठाने के लिए लंबी नोक वाले प्लास का उपयोग करें।

    He cut the locking wire with a pair of pliers.

    समानार्थीnipperstweezers (depending on the type)
    विलोमnone (Pliers are a specific tool with no direct opposite)
  2. 2

    spanner(noun)

    /ˈspænər/

    पाना, स्पैनर

    a metal hand tool with a shaped end for holding and turning nuts and bolts

    Pass me the 17 mm spanner so I can loosen this nut.

    मुझे 17 mm का पाना दो ताकि मैं यह नट ढीला कर सकूँ।

    Use a ring spanner on tight nuts so it does not slip.

    समानार्थीwrenchadjustable wrenchopen-end wrenchbox-end wrench
    विलोमnone
  3. 3

    chisel(noun)

    /ˈtʃɪzl/

    छेनी

    a hand tool with a sharp flat end, hit with a hammer to cut or shape metal, wood or stone

    He used a cold chisel to cut off the rusted bolt head.

    उसने जंग लगे बोल्ट के सिर को काटने के लिए कोल्ड छेनी का इस्तेमाल किया।

    Wear safety glasses when you strike a chisel with a hammer.

    समानार्थीcutting toolgraverscraper
    विलोमfilleradhesive
  4. 4

    drill bit(noun)

    /drɪl bɪt/

    ड्रिल बिट, बेधन बिट

    the cutting part fitted into a drill that makes the hole

    Use an 8.5 mm drill bit before tapping an M10 thread.

    M10 चूड़ी काटने से पहले 8.5 mm की ड्रिल बिट का उपयोग करें।

    A blunt drill bit overheats and leaves a rough hole.

    समानार्थीdrillaugerboring tool
    विलोमfastenerplug
  5. 5

    torque wrench(noun)

    /ˈtɔːk renʃ/

    बलाघूर्ण पाना, बलाघूर्ण रिंच

    a wrench that lets you tighten a bolt to an exact turning force set in newton metres

    Tighten the cylinder head bolts with a torque wrench set to 90 Nm.

    सिलिंडर हेड के बोल्टों को 90 Nm पर सेट किए गए बलाघूर्ण पाने से कसें।

    Our torque wrenches are calibrated every six months.

  6. 6

    socket wrench(noun)

    /ˈsɒkɪt renʃ/

    सॉकेट पाना, सॉकेट रिंच

    a wrench with a handle and interchangeable round sockets that fit over nuts and bolt heads

    A socket wrench is faster than a spanner in tight spaces.

    तंग जगहों में सॉकेट पाना साधारण पाने से तेज़ काम करता है।

    The technician keeps a full socket wrench set in his toolbox.

  7. 7

    Allen key(noun)

    /ˈælən kiː/

    एलन की, हेक्स की

    a small L-shaped metal bar with six flat sides, used to turn screws with a hexagonal hole

    You need a 5 mm Allen key to remove the guard cover.

    गार्ड कवर हटाने के लिए आपको 5 mm की एलन की चाहिए।

    Do not use a worn Allen key, or you will damage the screw head.

  8. 8

    hacksaw(noun)

    /ˈhæksɔː/

    हैकसॉ, लोहे की आरी

    a hand saw with a thin, fine-toothed blade in a frame, used for cutting metal

    Cut the pipe to length with a hacksaw and then file the end.

    पाइप को हैकसॉ से नाप के अनुसार काटें और फिर उसके सिरे पर रेती चलाएँ।

    Change the hacksaw blade when the teeth become dull.

  9. 9

    file(noun)

    /faɪl/

    रेती

    a steel hand tool with a rough surface, used for smoothing or shaping metal by rubbing

    Use a flat file to remove the sharp edges after cutting.

    काटने के बाद तीखे किनारे हटाने के लिए चपटी रेती का उपयोग करें।

    Apprentices practise with a file before they move on to the lathe.

  10. 10

    bench vice(noun)

    /ˈbentʃ vaɪs/

    बेंच वाइस, शिकंजा

    a tool fixed to a workbench with two jaws that hold a piece of work firmly while you work on it

    Clamp the bar in the bench vice before you start sawing.

    आरी चलाना शुरू करने से पहले छड़ को बेंच वाइस में कस लें।

    Use soft jaws in the bench vice to protect the finished surface.

  11. 11

    centre punch(noun)

    /ˈsentə pʌntʃ/

    सेंटर पंच, केंद्र पंच

    a pointed steel tool hit with a hammer to make a small mark where a hole will be drilled

    Mark each hole position with a centre punch so the drill does not wander.

    हर छेद की जगह पर सेंटर पंच से निशान लगाएँ ताकि ड्रिल इधर-उधर न भटके।

    An automatic centre punch makes marking faster on thin sheet.

  12. 12

    clamp(noun)

    /klæmp/

    क्लैंप, शिकंजा

    a device with two parts that can be tightened to hold things firmly together or in place

    Hold the two plates together with clamps before welding.

    वेल्डिंग से पहले दोनों प्लेटों को क्लैंप से एक साथ पकड़ें।

    A loose clamp allowed the workpiece to move during drilling.

  13. 13

    power drill(noun)

    /ˈpaʊə drɪl/

    बिजली की ड्रिल मशीन, पावर ड्रिल

    a hand-held electric tool that turns a drill bit to make holes

    A cordless power drill is handy for installing brackets on site.

    साइट पर ब्रैकेट लगाने के लिए बिना तार वाली पावर ड्रिल काम की होती है।

    Check the power drill cable for damage before every use.

  14. 14

    angle grinder(noun)

    /ˈæŋɡl ɡraɪndə(r)/

    एंगल ग्राइंडर, कोण ग्राइंडर

    a hand-held power tool with a fast spinning disc, used for cutting, grinding and polishing metal

    Never remove the guard from an angle grinder.

    एंगल ग्राइंडर से गार्ड कभी न हटाएँ।

    He cleaned the weld with an angle grinder and a flap disc.

  15. 15

    impact wrench(noun)

    /ˈɪmpækt renʃ/

    इम्पैक्ट रिंच, आघात रिंच

    a power tool that gives strong, fast turning blows to tighten or loosen large nuts and bolts

    The mechanic used an impact wrench to remove the wheel nuts.

    मैकेनिक ने पहिये के नट खोलने के लिए इम्पैक्ट रिंच का उपयोग किया।

    Do not use an impact wrench for final tightening; use a torque wrench.