コンテンツへスキップ

レッスン2/10 · 15語 · 覚えた単語 0

Hand and power tools

手工具と電動工具

  1. 1

    pliers(noun)

    /ˈplaɪərz/

    ペンチ, プライヤー

    a hand tool with two handles and jaws, used for gripping, bending or cutting wire and small parts

    Use long-nose pliers to fit the spring into the narrow slot.

    ラジオペンチを使って、狭い溝にばねを取り付けてください。

    He cut the locking wire with a pair of pliers.

    類義語nipperstweezers (depending on the type)
    対義語none (Pliers are a specific tool with no direct opposite)
  2. 2

    spanner(noun)

    /ˈspænər/

    スパナ, レンチ

    a metal hand tool with a shaped end for holding and turning nuts and bolts

    Pass me the 17 mm spanner so I can loosen this nut.

    このナットを緩めたいので、17 mmのスパナを取ってください。

    Use a ring spanner on tight nuts so it does not slip.

    類義語wrenchadjustable wrenchopen-end wrenchbox-end wrench
    対義語none
  3. 3

    chisel(noun)

    /ˈtʃɪzl/

    たがね, のみ, チゼル

    a hand tool with a sharp flat end, hit with a hammer to cut or shape metal, wood or stone

    He used a cold chisel to cut off the rusted bolt head.

    彼は冷間たがねを使って、錆びたボルトの頭を切り落としました。

    Wear safety glasses when you strike a chisel with a hammer.

    類義語cutting toolgraverscraper
    対義語filleradhesive
  4. 4

    drill bit(noun)

    /drɪl bɪt/

    ドリルビット, ドリル刃, 穴あけ用ビット

    the cutting part fitted into a drill that makes the hole

    Use an 8.5 mm drill bit before tapping an M10 thread.

    M10のねじを切る前に、8.5mmのドリル刃で下穴を開けてください。

    A blunt drill bit overheats and leaves a rough hole.

    類義語drillaugerboring tool
    対義語fastenerplug
  5. 5

    torque wrench(noun)

    /ˈtɔːk renʃ/

    トルクレンチ

    a wrench that lets you tighten a bolt to an exact turning force set in newton metres

    Tighten the cylinder head bolts with a torque wrench set to 90 Nm.

    シリンダーヘッドのボルトは、90 Nmに設定したトルクレンチで締め付けること。

    Our torque wrenches are calibrated every six months.

  6. 6

    socket wrench(noun)

    /ˈsɒkɪt renʃ/

    ソケットレンチ

    a wrench with a handle and interchangeable round sockets that fit over nuts and bolt heads

    A socket wrench is faster than a spanner in tight spaces.

    狭い場所では、ソケットレンチの方がスパナより速く作業できる。

    The technician keeps a full socket wrench set in his toolbox.

  7. 7

    Allen key(noun)

    /ˈælən kiː/

    六角レンチ, アーレンキー

    a small L-shaped metal bar with six flat sides, used to turn screws with a hexagonal hole

    You need a 5 mm Allen key to remove the guard cover.

    ガードカバーを外すには、5 mmの六角レンチが必要だ。

    Do not use a worn Allen key, or you will damage the screw head.

  8. 8

    hacksaw(noun)

    /ˈhæksɔː/

    弓のこ, 金切りのこ

    a hand saw with a thin, fine-toothed blade in a frame, used for cutting metal

    Cut the pipe to length with a hacksaw and then file the end.

    パイプは弓のこで必要な長さに切り、その後、端面にやすりをかけること。

    Change the hacksaw blade when the teeth become dull.

  9. 9

    file(noun)

    /faɪl/

    やすり

    a steel hand tool with a rough surface, used for smoothing or shaping metal by rubbing

    Use a flat file to remove the sharp edges after cutting.

    切断後の鋭いエッジは、平やすりで取り除くこと。

    Apprentices practise with a file before they move on to the lathe.

  10. 10

    bench vice(noun)

    /ˈbentʃ vaɪs/

    万力, 卓上万力

    a tool fixed to a workbench with two jaws that hold a piece of work firmly while you work on it

    Clamp the bar in the bench vice before you start sawing.

    のこぎりで切り始める前に、棒材を万力に固定すること。

    Use soft jaws in the bench vice to protect the finished surface.

  11. 11

    centre punch(noun)

    /ˈsentə pʌntʃ/

    センターポンチ

    a pointed steel tool hit with a hammer to make a small mark where a hole will be drilled

    Mark each hole position with a centre punch so the drill does not wander.

    ドリルがずれないよう、各穴の位置にセンターポンチで印を付けること。

    An automatic centre punch makes marking faster on thin sheet.

  12. 12

    clamp(noun)

    /klæmp/

    クランプ, 締め付け具

    a device with two parts that can be tightened to hold things firmly together or in place

    Hold the two plates together with clamps before welding.

    溶接の前に、2枚の板をクランプで固定すること。

    A loose clamp allowed the workpiece to move during drilling.

  13. 13

    power drill(noun)

    /ˈpaʊə drɪl/

    電動ドリル, ハンドドリル

    a hand-held electric tool that turns a drill bit to make holes

    A cordless power drill is handy for installing brackets on site.

    コードレスの電動ドリルは、現場でブラケットを取り付ける際に便利だ。

    Check the power drill cable for damage before every use.

  14. 14

    angle grinder(noun)

    /ˈæŋɡl ɡraɪndə(r)/

    アングルグラインダー, ディスクグラインダー

    a hand-held power tool with a fast spinning disc, used for cutting, grinding and polishing metal

    Never remove the guard from an angle grinder.

    アングルグラインダーのガードは絶対に外してはならない。

    He cleaned the weld with an angle grinder and a flap disc.

  15. 15

    impact wrench(noun)

    /ˈɪmpækt renʃ/

    インパクトレンチ

    a power tool that gives strong, fast turning blows to tighten or loosen large nuts and bolts

    The mechanic used an impact wrench to remove the wheel nuts.

    整備士はインパクトレンチでホイールナットを外した。

    Do not use an impact wrench for final tightening; use a torque wrench.