تخطَّ إلى المحتوى

الدرس 2/10 · 15 كلمة · تم تعلّم 0

Hand and power tools

الأدوات اليدوية والكهربائية

  1. 1

    pliers(noun)

    /ˈplaɪərz/

    كمّاشة, زردية

    a hand tool with two handles and jaws, used for gripping, bending or cutting wire and small parts

    Use long-nose pliers to fit the spring into the narrow slot.

    استخدم كمّاشة مدببة الرأس لتركيب النابض في الفتحة الضيقة.

    He cut the locking wire with a pair of pliers.

    المرادفاتnipperstweezers (depending on the type)
    الأضدادnone (Pliers are a specific tool with no direct opposite)
  2. 2

    spanner(noun)

    /ˈspænər/

    مفتاح ربط, مفتاح شق

    a metal hand tool with a shaped end for holding and turning nuts and bolts

    Pass me the 17 mm spanner so I can loosen this nut.

    ناولني مفتاح الربط مقاس 17 مم لأفكّ هذا الصامولة.

    Use a ring spanner on tight nuts so it does not slip.

    المرادفاتwrenchadjustable wrenchopen-end wrenchbox-end wrench
    الأضدادnone
  3. 3

    chisel(noun)

    /ˈtʃɪzl/

    إزميل

    a hand tool with a sharp flat end, hit with a hammer to cut or shape metal, wood or stone

    He used a cold chisel to cut off the rusted bolt head.

    استخدم إزميلًا للقطع على البارد لقطع رأس البرغي الصدئ.

    Wear safety glasses when you strike a chisel with a hammer.

    المرادفاتcutting toolgraverscraper
    الأضدادfilleradhesive
  4. 4

    drill bit(noun)

    /drɪl bɪt/

    لقمة الحفر, سنّ المثقاب

    the cutting part fitted into a drill that makes the hole

    Use an 8.5 mm drill bit before tapping an M10 thread.

    استخدم لقمة حفر بقطر 8.5 مم قبل تسنين الثقب بلولب M10.

    A blunt drill bit overheats and leaves a rough hole.

    المرادفاتdrillaugerboring tool
    الأضدادfastenerplug
  5. 5

    torque wrench(noun)

    /ˈtɔːk renʃ/

    مفتاح عزم, مفتاح ربط دينامومتري

    a wrench that lets you tighten a bolt to an exact turning force set in newton metres

    Tighten the cylinder head bolts with a torque wrench set to 90 Nm.

    شُدّ براغي رأس الأسطوانة بمفتاح عزم مضبوط على 90 Nm.

    Our torque wrenches are calibrated every six months.

  6. 6

    socket wrench(noun)

    /ˈsɒkɪt renʃ/

    مفتاح ربط صندوقي, مفتاح سقاطة بصواميل

    a wrench with a handle and interchangeable round sockets that fit over nuts and bolt heads

    A socket wrench is faster than a spanner in tight spaces.

    المفتاح الصندوقي أسرع من المفتاح العادي في الأماكن الضيقة.

    The technician keeps a full socket wrench set in his toolbox.

  7. 7

    Allen key(noun)

    /ˈælən kiː/

    مفتاح ألين, مفتاح سداسي

    a small L-shaped metal bar with six flat sides, used to turn screws with a hexagonal hole

    You need a 5 mm Allen key to remove the guard cover.

    تحتاج إلى مفتاح ألين مقاس 5 mm لإزالة غطاء الحماية.

    Do not use a worn Allen key, or you will damage the screw head.

  8. 8

    hacksaw(noun)

    /ˈhæksɔː/

    منشار حديد, منشار معادن يدوي

    a hand saw with a thin, fine-toothed blade in a frame, used for cutting metal

    Cut the pipe to length with a hacksaw and then file the end.

    اقطع الأنبوب بالطول المطلوب بمنشار الحديد ثم برّد طرفه.

    Change the hacksaw blade when the teeth become dull.

  9. 9

    file(noun)

    /faɪl/

    مبرد, مبرد يدوي

    a steel hand tool with a rough surface, used for smoothing or shaping metal by rubbing

    Use a flat file to remove the sharp edges after cutting.

    استخدم مبردًا مسطحًا لإزالة الحواف الحادة بعد القطع.

    Apprentices practise with a file before they move on to the lathe.

  10. 10

    bench vice(noun)

    /ˈbentʃ vaɪs/

    feel

    a tool fixed to a workbench with two jaws that hold a piece of work firmly while you work on it

    Clamp the bar in the bench vice before you start sawing.

    ثبّت القضيب في الملزمة قبل أن تبدأ بالنشر.

    Use soft jaws in the bench vice to protect the finished surface.

  11. 11

    centre punch(noun)

    /ˈsentə pʌntʃ/

    punch

    a pointed steel tool hit with a hammer to make a small mark where a hole will be drilled

    Mark each hole position with a centre punch so the drill does not wander.

    علّم موضع كل ثقب بنقطة مركزية حتى لا تنحرف المثقاب.

    An automatic centre punch makes marking faster on thin sheet.

  12. 12

    clamp(noun)

    /klæmp/

    مشبك, ملزمة تثبيت, كلاب

    a device with two parts that can be tightened to hold things firmly together or in place

    Hold the two plates together with clamps before welding.

    أمسك الصفيحتين معًا بالمشابك قبل اللحام.

    A loose clamp allowed the workpiece to move during drilling.

  13. 13

    power drill(noun)

    /ˈpaʊə drɪl/

    مثقاب كهربائي, دريل كهربائي

    a hand-held electric tool that turns a drill bit to make holes

    A cordless power drill is handy for installing brackets on site.

    المثقاب الكهربائي اللاسلكي مفيد لتركيب الحوامل في الموقع.

    Check the power drill cable for damage before every use.

  14. 14

    angle grinder(noun)

    /ˈæŋɡl ɡraɪndə(r)/

    صاروخ تجليخ, جلاخة زاوية, مجلخة يدوية

    a hand-held power tool with a fast spinning disc, used for cutting, grinding and polishing metal

    Never remove the guard from an angle grinder.

    لا تُزل أبدًا واقي جلاخة الزاوية.

    He cleaned the weld with an angle grinder and a flap disc.

  15. 15

    impact wrench(noun)

    /ˈɪmpækt renʃ/

    مفتاح ربط صدمي, مفتاح ربط هوائي

    a power tool that gives strong, fast turning blows to tighten or loosen large nuts and bolts

    The mechanic used an impact wrench to remove the wheel nuts.

    استخدم الميكانيكي مفتاح ربط صدميًا لفك صواميل العجلة.

    Do not use an impact wrench for final tightening; use a torque wrench.