Langkau ke kandungan

Pelajaran 2/10 · 15 perkataan · 0 sudah dipelajari

Hand and power tools

Alat tangan dan alat berkuasa

  1. 1

    pliers(noun)

    /ˈplaɪərz/

    playar, playar muncung tirus

    a hand tool with two handles and jaws, used for gripping, bending or cutting wire and small parts

    Use long-nose pliers to fit the spring into the narrow slot.

    Gunakan playar muncung panjang untuk memasang spring ke dalam alur yang sempit.

    He cut the locking wire with a pair of pliers.

    Sinonimnipperstweezers (depending on the type)
    Antonimnone (Pliers are a specific tool with no direct opposite)
  2. 2

    spanner(noun)

    /ˈspænər/

    sepana, pemutar nat

    a metal hand tool with a shaped end for holding and turning nuts and bolts

    Pass me the 17 mm spanner so I can loosen this nut.

    Hulurkan sepana 17 mm itu supaya saya boleh melonggarkan nat ini.

    Use a ring spanner on tight nuts so it does not slip.

    Sinonimwrenchadjustable wrenchopen-end wrenchbox-end wrench
    Antonimnone
  3. 3

    chisel(noun)

    /ˈtʃɪzl/

    pahat

    a hand tool with a sharp flat end, hit with a hammer to cut or shape metal, wood or stone

    He used a cold chisel to cut off the rusted bolt head.

    Dia menggunakan pahat sejuk untuk memotong kepala bolt yang berkarat.

    Wear safety glasses when you strike a chisel with a hammer.

    Sinonimcutting toolgraverscraper
    Antonimfilleradhesive
  4. 4

    drill bit(noun)

    /drɪl bɪt/

    mata gerudi

    the cutting part fitted into a drill that makes the hole

    Use an 8.5 mm drill bit before tapping an M10 thread.

    Gunakan mata gerudi 8.5 mm sebelum menarap ulir M10.

    A blunt drill bit overheats and leaves a rough hole.

    Sinonimdrillaugerboring tool
    Antonimfastenerplug
  5. 5

    torque wrench(noun)

    /ˈtɔːk renʃ/

    sepana tork

    a wrench that lets you tighten a bolt to an exact turning force set in newton metres

    Tighten the cylinder head bolts with a torque wrench set to 90 Nm.

    Ketatkan bolt kepala silinder dengan sepana tork yang ditetapkan pada 90 Nm.

    Our torque wrenches are calibrated every six months.

  6. 6

    socket wrench(noun)

    /ˈsɒkɪt renʃ/

    sepana soket

    a wrench with a handle and interchangeable round sockets that fit over nuts and bolt heads

    A socket wrench is faster than a spanner in tight spaces.

    Sepana soket lebih pantas daripada sepana biasa di ruang yang sempit.

    The technician keeps a full socket wrench set in his toolbox.

  7. 7

    Allen key(noun)

    /ˈælən kiː/

    kunci Allen, kunci heksagon

    a small L-shaped metal bar with six flat sides, used to turn screws with a hexagonal hole

    You need a 5 mm Allen key to remove the guard cover.

    Anda memerlukan kunci Allen 5 mm untuk menanggalkan penutup pelindung.

    Do not use a worn Allen key, or you will damage the screw head.

  8. 8

    hacksaw(noun)

    /ˈhæksɔː/

    gergaji besi

    a hand saw with a thin, fine-toothed blade in a frame, used for cutting metal

    Cut the pipe to length with a hacksaw and then file the end.

    Potong paip mengikut panjang dengan gergaji besi, kemudian kikir hujungnya.

    Change the hacksaw blade when the teeth become dull.

  9. 9

    file(noun)

    /faɪl/

    kikir

    a steel hand tool with a rough surface, used for smoothing or shaping metal by rubbing

    Use a flat file to remove the sharp edges after cutting.

    Gunakan kikir rata untuk membuang tepi yang tajam selepas pemotongan.

    Apprentices practise with a file before they move on to the lathe.

  10. 10

    bench vice(noun)

    /ˈbentʃ vaɪs/

    ragum bangku, ragum

    a tool fixed to a workbench with two jaws that hold a piece of work firmly while you work on it

    Clamp the bar in the bench vice before you start sawing.

    Apitkan bar itu dalam ragum bangku sebelum anda mula menggergaji.

    Use soft jaws in the bench vice to protect the finished surface.

  11. 11

    centre punch(noun)

    /ˈsentə pʌntʃ/

    penebuk pusat, penebuk tengah

    a pointed steel tool hit with a hammer to make a small mark where a hole will be drilled

    Mark each hole position with a centre punch so the drill does not wander.

    Tandakan kedudukan setiap lubang dengan penebuk pusat supaya mata gerudi tidak tergelincir.

    An automatic centre punch makes marking faster on thin sheet.

  12. 12

    clamp(noun)

    /klæmp/

    pengapit

    a device with two parts that can be tightened to hold things firmly together or in place

    Hold the two plates together with clamps before welding.

    Pegang kedua-dua plat bersama dengan pengapit sebelum mengimpal.

    A loose clamp allowed the workpiece to move during drilling.

  13. 13

    power drill(noun)

    /ˈpaʊə drɪl/

    gerudi kuasa, gerudi elektrik

    a hand-held electric tool that turns a drill bit to make holes

    A cordless power drill is handy for installing brackets on site.

    Gerudi kuasa tanpa wayar sangat berguna untuk memasang braket di tapak.

    Check the power drill cable for damage before every use.

  14. 14

    angle grinder(noun)

    /ˈæŋɡl ɡraɪndə(r)/

    pengisar sudut, pencanai sudut

    a hand-held power tool with a fast spinning disc, used for cutting, grinding and polishing metal

    Never remove the guard from an angle grinder.

    Jangan sekali-kali menanggalkan pelindung daripada pengisar sudut.

    He cleaned the weld with an angle grinder and a flap disc.

  15. 15

    impact wrench(noun)

    /ˈɪmpækt renʃ/

    sepana hentaman, sepana impak

    a power tool that gives strong, fast turning blows to tighten or loosen large nuts and bolts

    The mechanic used an impact wrench to remove the wheel nuts.

    Mekanik itu menggunakan sepana hentaman untuk menanggalkan nat roda.

    Do not use an impact wrench for final tightening; use a torque wrench.