Langsung ke konten

Pelajaran 9/10 · 15 kata · 0 sudah hafal

Measurement and fault finding

Pengukuran dan pencarian gangguan

  1. 1

    calibrate(verb)

    /ˈkælɪbreɪt/

    mengkalibrasi, kalibrasi

    to check and adjust a measuring instrument so that its readings are accurate

    All test instruments must be calibrated once a year.

    Semua alat uji harus dikalibrasi setahun sekali.

    The pressure transmitter was calibrated before the system was started.

    Sinonimadjusttunecorrectstandardizeset
    Antonimunbalancemisadjustdistort
  2. 2

    oscilloscope(noun)

    /əˈsɪləskəʊp/

    osiloskop

    an instrument that shows how a voltage changes over time as a waveform on a screen

    The oscilloscope showed noise on the encoder signal.

    Osiloskop menunjukkan adanya derau pada sinyal enkoder.

    Use an isolated oscilloscope probe when measuring the drive output.

    Sinonimscopewaveform monitor
    AntonimN/A
  3. 3

    troubleshoot(verb)

    /ˈtrʌblʃuːt/

    melakukan pemecahan masalah, memecahkan masalah, mengatasi gangguan

    to find the cause of a technical problem and fix it, usually by checking possible causes one by one

    The technician spent an hour troubleshooting the Wi-Fi in the meeting room.

    Teknisi menghabiskan satu jam untuk memecahkan masalah Wi-Fi di ruang rapat.

    Follow these steps to troubleshoot common login problems.

    Sinonimdiagnosefixresolvedebug
    Antonimignoreneglect
  4. 4

    multimeter(noun)

    /ˈmʌltimiːtə(r)/

    multimeter, avometer

    a handheld meter that measures voltage, current and resistance, and can test continuity

    Set the multimeter to AC volts before checking the socket.

    Atur multimeter ke tegangan AC sebelum memeriksa stopkontak.

    Every technician carries a digital multimeter in the tool bag.

  5. 5

    clamp meter(noun)

    /ˈklæmp ˌmiːtə(r)/

    tang ampere, amperemeter jepit

    a meter with jaws that close around a single wire to measure current without disconnecting it

    Use a clamp meter to check the current on each phase of the motor.

    Gunakan tang ampere untuk memeriksa arus pada setiap fasa motor.

    Clamp only one conductor, or the clamp meter will read zero.

  6. 6

    insulation resistance tester(noun)

    /ˌɪnsjuˈleɪʃn rɪˈzɪstəns ˌtestə(r)/

    alat uji tahanan isolasi, megohmmeter

    an instrument that applies a high test voltage to measure how well cable or winding insulation prevents leakage

    Test the motor with an insulation resistance tester at 500 volts.

    Uji motor dengan alat uji tahanan isolasi pada 500 volt.

    Disconnect the electronics before using the insulation resistance tester on the cable.

  7. 7

    earth resistance tester(noun)

    /ˈɜːθ rɪˌzɪstəns ˌtestə(r)/

    alat ukur tahanan pembumian, alat ukur tahanan tanah

    an instrument used to measure the resistance between an earth electrode and the surrounding ground

    The earth resistance tester showed 2 ohms, which meets the requirement.

    Alat ukur tahanan pembumian menunjukkan 2 ohm, yang memenuhi persyaratan.

    Drive the test spikes into the soil before using the earth resistance tester.

  8. 8

    test lead(noun)

    /ˈtest liːd/

    kabel ukur, kabel penguji

    an insulated wire with a probe or clip that connects a meter to the circuit being measured

    Replace any test lead with cracked insulation before you use the meter.

    Ganti kabel ukur yang isolasinya retak sebelum menggunakan alat ukur.

    Plug the red test lead into the volts socket of the meter.

  9. 9

    continuity test(noun)

    /ˌkɒntɪˈnjuːəti test/

    uji kontinuitas, uji kesinambungan

    a test that checks whether a conductor or circuit forms a complete path with no breaks

    Do a continuity test on the earth conductor before energising the board.

    Lakukan uji kontinuitas pada penghantar pembumian sebelum panel diberi tegangan.

    The continuity test showed a broken wire inside the trailing cable.

  10. 10

    thermal imaging(noun)

    /ˌθɜːml ˈɪmɪdʒɪŋ/

    pencitraan termal, termografi inframerah

    the use of a special camera that shows heat, to find hot connections and overloaded parts

    A thermal imaging survey found three loose busbar joints.

    Survei pencitraan termal menemukan tiga sambungan busbar yang longgar.

    We do thermal imaging of all main panels every six months.

  11. 11

    commissioning(noun)

    /kəˈmɪʃənɪŋ/

    komisioning, uji coba pengoperasian

    the process of testing and checking new electrical equipment to prove it works correctly before handover

    Commissioning of the new switchboard is planned for next Tuesday.

    Komisioning panel hubung bagi yang baru direncanakan pada hari Selasa depan.

    All test results must be recorded in the commissioning report.

  12. 12

    fault(noun)

    /fɔːlt/

    gangguan, kerusakan

    a defect or abnormal condition in an electrical circuit or device that stops it working correctly

    The breaker opened to isolate the fault in the cable.

    Pemutus sirkuit terbuka untuk mengisolasi gangguan pada kabel.

    Write the fault and the repair in the maintenance log.

  13. 13

    earth fault(noun)

    /ˈɜːθ fɔːlt/

    gangguan tanah, gangguan hubung tanah

    a fault where a live conductor accidentally touches earth or a metal part connected to earth

    An earth fault in the outdoor light tripped the RCD.

    Gangguan tanah pada lampu luar ruangan membuat RCD bekerja memutus arus.

    The relay detected an earth fault on feeder number four.

  14. 14

    trip(verb)

    /trɪp/

    memutus otomatis, jatuh

    of a breaker or protection device: to switch off automatically because it detects a fault or overload

    The RCD in the outdoor lighting board keeps tripping whenever it rains.

    RCD pada panel lampu luar ruangan terus jatuh setiap kali hujan.

    The overload relay tripped because the pump was blocked.

  15. 15

    loose connection(noun)

    /ˌluːs kəˈnekʃn/

    sambungan longgar, kontak longgar

    a terminal or joint that is not tight, which can cause heat, sparking or an intermittent fault

    A loose connection at the terminal caused the cable to burn.

    Sambungan longgar pada terminal menyebabkan kabel terbakar.

    Most intermittent faults in panels are caused by a loose connection.