Skip to content

Lesson 5/10 · 17 words · 0 learned

Machining processes

  1. 1

    coolant(noun)

    /ˈkuːlənt/

    a liquid used to cool and lubricate a tool and workpiece, or to cool an engine or machine

    Check the coolant concentration in the machine tank every Monday morning.

    Without enough coolant, the drill overheated and broke.

    Synonymsantifreezerefrigerant
    Antonymsheat sourceinsulator
  2. 2

    cutting tool(noun)

    /ˈkʌtɪŋ tuːl/

    the sharp tool in a machine, such as a drill, insert or cutter, that removes material from the workpiece

    Carbide cutting tools last longer than high-speed steel ones.

    Cutting tool costs are about eight percent of our machining budget.

    Synonymsbladecutteredge tool
    Antonymsblunt object
  3. 3

    lathe(noun)

    /leɪð/

    a machine that turns the workpiece while a fixed cutting tool removes material to make round parts

    The shafts are turned on a CNC lathe.

    He has ten years of experience on a manual lathe.

    Synonymsturning machineboring machine
    AntonymsNone
  4. 4

    swarf(noun)

    /swɔ:f/

    the small pieces of metal that are cut off during machining

    Clear the swarf from the machine bed with a brush, not your hands.

    Long swarf wrapped around the tool and damaged the surface.

    Synonymsshavingscuttingsdebrisgrindings
    Antonymsingotbilletstock
  5. 5

    machining(noun)

    /məˈʃiːnɪŋ/

    shaping metal or other material by cutting away parts of it with machine tools

    Machining the housing takes about forty minutes per piece.

    The company offers precision machining for the automotive industry.

  6. 6

    turning(noun)

    /ˈtɜːnɪŋ/

    machining on a lathe, where the part rotates and the tool cuts its outside or inside diameter

    Turning is the main process for making pins and shafts.

    Leave 0.3 mm on the diameter for finish turning.

  7. 7

    milling(noun)

    /ˈmɪlɪŋ/

    machining in which a rotating cutter with several teeth removes material from a fixed workpiece

    The slots are cut by milling after the part is turned.

    Our new five-axis milling centre can make complex shapes.

  8. 8

    reaming(noun)

    /ˈriːmɪŋ/

    finishing a drilled hole with a special tool to make it an exact size with a smooth surface

    The dowel holes need reaming to H7 after drilling.

    Leave about 0.2 mm of material for reaming.

  9. 9

    grinding(noun)

    /ˈɡraɪndɪŋ/

    using a turning abrasive wheel to remove small amounts of material and give a very accurate, smooth finish

    After heat treatment, the bearing seats are finished by grinding.

    Surface grinding gives the plates a flatness within 5 microns.

  10. 10

    CNC(abbreviation)

    /ˌsiː en ˈsiː/

    computer numerical control: control of a machine tool by a computer program that sets tool movements and speeds

    We are hiring a CNC operator for the night shift.

    The CNC program was checked on a simulator before the first cut.

  11. 11

    feed rate(noun)

    /ˈfiːd reɪt/

    the speed at which the cutting tool moves into or along the workpiece

    Reduce the feed rate if the tool starts to chatter.

    A higher feed rate cut the cycle time by twenty percent.

  12. 12

    spindle speed(noun)

    /ˈspɪndl spiːd/

    how fast the machine spindle turns, measured in revolutions per minute

    Set the spindle speed to 1200 rpm for this aluminium part.

    Too high a spindle speed will burn the drill.

  13. 13

    depth of cut(noun)

    /ˌdepθ əv ˈkʌt/

    how deep the cutting tool goes into the material in one pass

    Use a depth of cut of 2 mm for roughing and 0.2 mm for finishing.

    The insert broke because the depth of cut was too large.

  14. 14

    chuck(noun)

    /tʃʌk/

    the device with jaws on a lathe or drill that holds the workpiece or tool firmly while it turns

    Never leave the chuck key in the chuck.

    Thin parts can be crushed if the chuck pressure is too high.

  15. 15

    workpiece(noun)

    /ˈwɜːkpiːs/

    the piece of material or part that is being machined or worked on

    Make sure the workpiece is firmly clamped before starting the spindle.

    The workpiece moved slightly, so the hole was out of position.

  16. 16

    jig(noun)

    /dʒɪɡ/

    a device that holds a part and guides the tool, so the same operation can be repeated accurately

    A drill jig makes sure every hole is in the same place.

    The welding jig holds the frame square while it is tacked.

  17. 17

    fixture(noun)

    /ˈfɪkstʃə(r)/

    a device that holds and locates a workpiece firmly in the correct position on a machine

    We designed a fixture that holds four parts at once on the milling machine.

    Changing the fixture adds fifteen minutes to the setup time.