Langkau ke kandungan

Pelajaran 5/10 · 17 perkataan · 0 sudah dipelajari

Machining processes

Proses pemesinan

  1. 1

    coolant(noun)

    /ˈkuːlənt/

    penyejuk, bahan penyejuk

    a liquid used to cool and lubricate a tool and workpiece, or to cool an engine or machine

    Check the coolant concentration in the machine tank every Monday morning.

    Semak kepekatan penyejuk dalam tangki mesin setiap pagi Isnin.

    Without enough coolant, the drill overheated and broke.

    Sinonimantifreezerefrigerant
    Antonimheat sourceinsulator
  2. 2

    cutting tool(noun)

    /ˈkʌtɪŋ tuːl/

    alat pemotong, mata alat

    the sharp tool in a machine, such as a drill, insert or cutter, that removes material from the workpiece

    Carbide cutting tools last longer than high-speed steel ones.

    Alat pemotong karbida tahan lebih lama berbanding yang diperbuat daripada keluli berkelajuan tinggi.

    Cutting tool costs are about eight percent of our machining budget.

    Sinonimbladecutteredge tool
    Antonimblunt object
  3. 3

    lathe(noun)

    /leɪð/

    mesin larik

    a machine that turns the workpiece while a fixed cutting tool removes material to make round parts

    The shafts are turned on a CNC lathe.

    Aci itu dilarik pada mesin larik CNC.

    He has ten years of experience on a manual lathe.

    Sinonimturning machineboring machine
    AntonimNone
  4. 4

    swarf(noun)

    /swɔ:f/

    tatal, serpihan logam

    the small pieces of metal that are cut off during machining

    Clear the swarf from the machine bed with a brush, not your hands.

    Bersihkan tatal daripada alas mesin dengan berus, bukan dengan tangan.

    Long swarf wrapped around the tool and damaged the surface.

    Sinonimshavingscuttingsdebrisgrindings
    Antonimingotbilletstock
  5. 5

    machining(noun)

    /məˈʃiːnɪŋ/

    pemesinan, kerja mesin

    shaping metal or other material by cutting away parts of it with machine tools

    Machining the housing takes about forty minutes per piece.

    Pemesinan perumah itu mengambil masa kira-kira empat puluh minit bagi setiap keping.

    The company offers precision machining for the automotive industry.

  6. 6

    turning(noun)

    /ˈtɜːnɪŋ/

    pelarikan, melarik

    machining on a lathe, where the part rotates and the tool cuts its outside or inside diameter

    Turning is the main process for making pins and shafts.

    Pelarikan ialah proses utama untuk membuat pin dan aci.

    Leave 0.3 mm on the diameter for finish turning.

  7. 7

    milling(noun)

    /ˈmɪlɪŋ/

    pengilangan, pengisaran

    machining in which a rotating cutter with several teeth removes material from a fixed workpiece

    The slots are cut by milling after the part is turned.

    Alur dipotong melalui pengilangan selepas bahagian itu dilarik.

    Our new five-axis milling centre can make complex shapes.

  8. 8

    reaming(noun)

    /ˈriːmɪŋ/

    pengorekan lubang, pengreman

    finishing a drilled hole with a special tool to make it an exact size with a smooth surface

    The dowel holes need reaming to H7 after drilling.

    Lubang dowel perlu dikorek sehingga H7 selepas penggerudian.

    Leave about 0.2 mm of material for reaming.

  9. 9

    grinding(noun)

    /ˈɡraɪndɪŋ/

    pencanaian, pengisaran

    using a turning abrasive wheel to remove small amounts of material and give a very accurate, smooth finish

    After heat treatment, the bearing seats are finished by grinding.

    Selepas rawatan haba, tempat duduk bering dikemaskan melalui pencanaian.

    Surface grinding gives the plates a flatness within 5 microns.

  10. 10

    CNC(abbreviation)

    /ˌsiː en ˈsiː/

    CNC, kawalan berangka komputer

    computer numerical control: control of a machine tool by a computer program that sets tool movements and speeds

    We are hiring a CNC operator for the night shift.

    Kami mengambil operator CNC untuk syif malam.

    The CNC program was checked on a simulator before the first cut.

  11. 11

    feed rate(noun)

    /ˈfiːd reɪt/

    kadar suapan

    the speed at which the cutting tool moves into or along the workpiece

    Reduce the feed rate if the tool starts to chatter.

    Kurangkan kadar suapan jika alat mula bergetar.

    A higher feed rate cut the cycle time by twenty percent.

  12. 12

    spindle speed(noun)

    /ˈspɪndl spiːd/

    kelajuan gelendong

    how fast the machine spindle turns, measured in revolutions per minute

    Set the spindle speed to 1200 rpm for this aluminium part.

    Tetapkan kelajuan gelendong kepada 1200 rpm untuk bahagian aluminium ini.

    Too high a spindle speed will burn the drill.

  13. 13

    depth of cut(noun)

    /ˌdepθ əv ˈkʌt/

    kedalaman pemotongan

    how deep the cutting tool goes into the material in one pass

    Use a depth of cut of 2 mm for roughing and 0.2 mm for finishing.

    Gunakan kedalaman pemotongan 2 mm untuk pemotongan kasar dan 0.2 mm untuk kemasan.

    The insert broke because the depth of cut was too large.

  14. 14

    chuck(noun)

    /tʃʌk/

    pencengkam, cak

    the device with jaws on a lathe or drill that holds the workpiece or tool firmly while it turns

    Never leave the chuck key in the chuck.

    Jangan sekali-kali tinggalkan kunci cak pada cak.

    Thin parts can be crushed if the chuck pressure is too high.

  15. 15

    workpiece(noun)

    /ˈwɜːkpiːs/

    bahan kerja, benda kerja

    the piece of material or part that is being machined or worked on

    Make sure the workpiece is firmly clamped before starting the spindle.

    Pastikan bahan kerja diapit dengan kukuh sebelum menghidupkan gelendong.

    The workpiece moved slightly, so the hole was out of position.

  16. 16

    jig(noun)

    /dʒɪɡ/

    alat pemandu, perkakas pemandu

    a device that holds a part and guides the tool, so the same operation can be repeated accurately

    A drill jig makes sure every hole is in the same place.

    Alat pemandu gerudi memastikan setiap lubang berada di tempat yang sama.

    The welding jig holds the frame square while it is tacked.

  17. 17

    fixture(noun)

    /ˈfɪkstʃə(r)/

    lekapan, alat pemegang

    a device that holds and locates a workpiece firmly in the correct position on a machine

    We designed a fixture that holds four parts at once on the milling machine.

    Kami mereka bentuk lekapan yang memegang empat bahagian serentak pada mesin pengilang.

    Changing the fixture adds fifteen minutes to the setup time.