Pelajaran 5/10 · 17 kata · 0 sudah hafal
Machining processes
Proses permesinan
cairan pendingin, koolan
a liquid used to cool and lubricate a tool and workpiece, or to cool an engine or machine
Check the coolant concentration in the machine tank every Monday morning.
Periksa konsentrasi cairan pendingin di tangki mesin setiap Senin pagi.
Without enough coolant, the drill overheated and broke.
SinonimantifreezerefrigerantAntonimheat sourceinsulatorpahat potong, alat potong
the sharp tool in a machine, such as a drill, insert or cutter, that removes material from the workpiece
Carbide cutting tools last longer than high-speed steel ones.
Pahat potong karbida lebih awet daripada yang terbuat dari baja kecepatan tinggi.
Cutting tool costs are about eight percent of our machining budget.
Sinonimbladecutteredge toolAntonimblunt objectmesin bubut
a machine that turns the workpiece while a fixed cutting tool removes material to make round parts
The shafts are turned on a CNC lathe.
Poros-poros tersebut dibubut dengan mesin bubut CNC.
He has ten years of experience on a manual lathe.
Sinonimturning machineboring machineAntonimNonegeram, serpihan logam, tatal
the small pieces of metal that are cut off during machining
Clear the swarf from the machine bed with a brush, not your hands.
Bersihkan geram dari meja mesin dengan sikat, bukan dengan tangan.
Long swarf wrapped around the tool and damaged the surface.
SinonimshavingscuttingsdebrisgrindingsAntonimingotbilletstockpemesinan, permesinan, pemotongan logam
shaping metal or other material by cutting away parts of it with machine tools
Machining the housing takes about forty minutes per piece.
Pemesinan rumah komponen itu memakan waktu sekitar empat puluh menit per buah.
The company offers precision machining for the automotive industry.
pemfraisan, frais
machining in which a rotating cutter with several teeth removes material from a fixed workpiece
The slots are cut by milling after the part is turned.
Alur-alurnya dibuat dengan pemfraisan setelah komponen dibubut.
Our new five-axis milling centre can make complex shapes.
peluasan lubang, reaming
finishing a drilled hole with a special tool to make it an exact size with a smooth surface
The dowel holes need reaming to H7 after drilling.
Lubang pasak penyetel perlu di-reaming sampai toleransi H7 setelah dibor.
Leave about 0.2 mm of material for reaming.
penggerindaan, gerinda
using a turning abrasive wheel to remove small amounts of material and give a very accurate, smooth finish
After heat treatment, the bearing seats are finished by grinding.
Setelah perlakuan panas, dudukan bantalan diselesaikan dengan penggerindaan.
Surface grinding gives the plates a flatness within 5 microns.
CNC, kendali numerik komputer
computer numerical control: control of a machine tool by a computer program that sets tool movements and speeds
We are hiring a CNC operator for the night shift.
Kami sedang mencari operator CNC untuk shift malam.
The CNC program was checked on a simulator before the first cut.
kecepatan spindel, putaran spindel
how fast the machine spindle turns, measured in revolutions per minute
Set the spindle speed to 1200 rpm for this aluminium part.
Atur kecepatan spindel ke 1200 rpm untuk komponen aluminium ini.
Too high a spindle speed will burn the drill.
kedalaman pemotongan, kedalaman potong
how deep the cutting tool goes into the material in one pass
Use a depth of cut of 2 mm for roughing and 0.2 mm for finishing.
Gunakan kedalaman pemotongan 2 mm untuk pengasaran dan 0,2 mm untuk penyelesaian akhir.
The insert broke because the depth of cut was too large.
jig, alat pemandu
a device that holds a part and guides the tool, so the same operation can be repeated accurately
A drill jig makes sure every hole is in the same place.
Jig bor memastikan setiap lubang berada di tempat yang sama.
The welding jig holds the frame square while it is tacked.
fixture, alat pemegang benda kerja
a device that holds and locates a workpiece firmly in the correct position on a machine
We designed a fixture that holds four parts at once on the milling machine.
Kami merancang fixture yang menahan empat komponen sekaligus pada mesin frais.
Changing the fixture adds fifteen minutes to the setup time.
