सामग्री पर जाएँ

पाठ 5/10 · 17 शब्द · 0 याद हो गए

Machining processes

मशीनिंग प्रक्रियाएँ

  1. 1

    coolant(noun)

    /ˈkuːlənt/

    शीतलक, कूलेंट

    a liquid used to cool and lubricate a tool and workpiece, or to cool an engine or machine

    Check the coolant concentration in the machine tank every Monday morning.

    हर सोमवार सुबह मशीन के टैंक में कूलेंट की सांद्रता जाँच लें।

    Without enough coolant, the drill overheated and broke.

    समानार्थीantifreezerefrigerant
    विलोमheat sourceinsulator
  2. 2

    cutting tool(noun)

    /ˈkʌtɪŋ tuːl/

    कटिंग टूल, कर्तन औज़ार

    the sharp tool in a machine, such as a drill, insert or cutter, that removes material from the workpiece

    Carbide cutting tools last longer than high-speed steel ones.

    कार्बाइड कटिंग टूल हाई-स्पीड स्टील वाले टूल की तुलना में अधिक समय तक चलते हैं।

    Cutting tool costs are about eight percent of our machining budget.

    समानार्थीbladecutteredge tool
    विलोमblunt object
  3. 3

    lathe(noun)

    /leɪð/

    खराद मशीन, लेथ मशीन

    a machine that turns the workpiece while a fixed cutting tool removes material to make round parts

    The shafts are turned on a CNC lathe.

    शाफ़्टों को सीएनसी खराद मशीन पर तराशा जाता है।

    He has ten years of experience on a manual lathe.

    समानार्थीturning machineboring machine
    विलोमNone
  4. 4

    swarf(noun)

    /swɔ:f/

    धातु की छीलन, कतरन

    the small pieces of metal that are cut off during machining

    Clear the swarf from the machine bed with a brush, not your hands.

    मशीन बेड से धातु की छीलन को हाथ से नहीं, ब्रश से साफ़ करें।

    Long swarf wrapped around the tool and damaged the surface.

    समानार्थीshavingscuttingsdebrisgrindings
    विलोमingotbilletstock
  5. 5

    machining(noun)

    /məˈʃiːnɪŋ/

    मशीनिंग, यंत्रण

    shaping metal or other material by cutting away parts of it with machine tools

    Machining the housing takes about forty minutes per piece.

    हाउसिंग की मशीनिंग में प्रति नग लगभग चालीस मिनट लगते हैं।

    The company offers precision machining for the automotive industry.

  6. 6

    turning(noun)

    /ˈtɜːnɪŋ/

    टर्निंग, खराद कार्य

    machining on a lathe, where the part rotates and the tool cuts its outside or inside diameter

    Turning is the main process for making pins and shafts.

    पिन और शाफ़्ट बनाने के लिए टर्निंग मुख्य प्रक्रिया है।

    Leave 0.3 mm on the diameter for finish turning.

  7. 7

    milling(noun)

    /ˈmɪlɪŋ/

    मिलिंग, मिलिंग मशीनिंग

    machining in which a rotating cutter with several teeth removes material from a fixed workpiece

    The slots are cut by milling after the part is turned.

    पुर्जे की टर्निंग के बाद खाँचे मिलिंग से काटे जाते हैं।

    Our new five-axis milling centre can make complex shapes.

  8. 8

    reaming(noun)

    /ˈriːmɪŋ/

    रीमिंग, छिद्र परिष्करण

    finishing a drilled hole with a special tool to make it an exact size with a smooth surface

    The dowel holes need reaming to H7 after drilling.

    डोवेल छिद्रों को ड्रिलिंग के बाद H7 तक रीमिंग की आवश्यकता है।

    Leave about 0.2 mm of material for reaming.

  9. 9

    grinding(noun)

    /ˈɡraɪndɪŋ/

    ग्राइंडिंग, घिसाई

    using a turning abrasive wheel to remove small amounts of material and give a very accurate, smooth finish

    After heat treatment, the bearing seats are finished by grinding.

    ऊष्मा उपचार के बाद बेयरिंग सीटों की ग्राइंडिंग से फ़िनिशिंग की जाती है।

    Surface grinding gives the plates a flatness within 5 microns.

  10. 10

    CNC(abbreviation)

    /ˌsiː en ˈsiː/

    CNC, कंप्यूटर संख्यात्मक नियंत्रण

    computer numerical control: control of a machine tool by a computer program that sets tool movements and speeds

    We are hiring a CNC operator for the night shift.

    हम रात की शिफ़्ट के लिए एक CNC ऑपरेटर की भर्ती कर रहे हैं।

    The CNC program was checked on a simulator before the first cut.

  11. 11

    feed rate(noun)

    /ˈfiːd reɪt/

    फ़ीड दर, भरण गति

    the speed at which the cutting tool moves into or along the workpiece

    Reduce the feed rate if the tool starts to chatter.

    यदि औज़ार में कंपन (चैटर) होने लगे तो फ़ीड दर घटा दें।

    A higher feed rate cut the cycle time by twenty percent.

  12. 12

    spindle speed(noun)

    /ˈspɪndl spiːd/

    स्पिंडल गति, स्पिंडल चाल

    how fast the machine spindle turns, measured in revolutions per minute

    Set the spindle speed to 1200 rpm for this aluminium part.

    इस एल्युमिनियम पुर्जे के लिए स्पिंडल गति 1200 rpm पर सेट करें।

    Too high a spindle speed will burn the drill.

  13. 13

    depth of cut(noun)

    /ˌdepθ əv ˈkʌt/

    कटाई की गहराई, कट की गहराई

    how deep the cutting tool goes into the material in one pass

    Use a depth of cut of 2 mm for roughing and 0.2 mm for finishing.

    रफ़िंग के लिए 2 mm और फ़िनिशिंग के लिए 0.2 mm कटाई की गहराई रखें।

    The insert broke because the depth of cut was too large.

  14. 14

    chuck(noun)

    /tʃʌk/

    चक

    the device with jaws on a lathe or drill that holds the workpiece or tool firmly while it turns

    Never leave the chuck key in the chuck.

    चक की कुंजी को कभी भी चक में लगी न छोड़ें।

    Thin parts can be crushed if the chuck pressure is too high.

  15. 15

    workpiece(noun)

    /ˈwɜːkpiːs/

    वर्कपीस, कार्यखंड

    the piece of material or part that is being machined or worked on

    Make sure the workpiece is firmly clamped before starting the spindle.

    स्पिंडल चालू करने से पहले सुनिश्चित करें कि वर्कपीस मज़बूती से कसा हुआ है।

    The workpiece moved slightly, so the hole was out of position.

  16. 16

    jig(noun)

    /dʒɪɡ/

    जिग

    a device that holds a part and guides the tool, so the same operation can be repeated accurately

    A drill jig makes sure every hole is in the same place.

    ड्रिल जिग यह सुनिश्चित करता है कि हर छेद एक ही स्थान पर हो।

    The welding jig holds the frame square while it is tacked.

  17. 17

    fixture(noun)

    /ˈfɪkstʃə(r)/

    फ़िक्सचर

    a device that holds and locates a workpiece firmly in the correct position on a machine

    We designed a fixture that holds four parts at once on the milling machine.

    हमने ऐसा फ़िक्सचर डिज़ाइन किया जो मिलिंग मशीन पर एक साथ चार पुर्जे पकड़ता है।

    Changing the fixture adds fifteen minutes to the setup time.