コンテンツへスキップ

レッスン5/10 · 17語 · 覚えた単語 0

Machining processes

機械加工

  1. 1

    coolant(noun)

    /ˈkuːlənt/

    クーラント, 切削油, 冷却液

    a liquid used to cool and lubricate a tool and workpiece, or to cool an engine or machine

    Check the coolant concentration in the machine tank every Monday morning.

    毎週月曜日の朝に、機械のタンク内のクーラント濃度を確認してください。

    Without enough coolant, the drill overheated and broke.

    類義語antifreezerefrigerant
    対義語heat sourceinsulator
  2. 2

    cutting tool(noun)

    /ˈkʌtɪŋ tuːl/

    切削工具, 刃物

    the sharp tool in a machine, such as a drill, insert or cutter, that removes material from the workpiece

    Carbide cutting tools last longer than high-speed steel ones.

    超硬の切削工具は、ハイス鋼のものより寿命が長い。

    Cutting tool costs are about eight percent of our machining budget.

    類義語bladecutteredge tool
    対義語blunt object
  3. 3

    lathe(noun)

    /leɪð/

    旋盤

    a machine that turns the workpiece while a fixed cutting tool removes material to make round parts

    The shafts are turned on a CNC lathe.

    シャフトはCNC旋盤で削り出されている。

    He has ten years of experience on a manual lathe.

    類義語turning machineboring machine
    対義語None
  4. 4

    swarf(noun)

    /swɔ:f/

    切りくず, 切粉

    the small pieces of metal that are cut off during machining

    Clear the swarf from the machine bed with a brush, not your hands.

    機械のベッド上の切りくずは、手ではなくブラシで取り除いてください。

    Long swarf wrapped around the tool and damaged the surface.

    類義語shavingscuttingsdebrisgrindings
    対義語ingotbilletstock
  5. 5

    machining(noun)

    /məˈʃiːnɪŋ/

    機械加工, 切削加工

    shaping metal or other material by cutting away parts of it with machine tools

    Machining the housing takes about forty minutes per piece.

    ハウジングの機械加工には、1個につき約40分かかります。

    The company offers precision machining for the automotive industry.

  6. 6

    turning(noun)

    /ˈtɜːnɪŋ/

    旋削, 旋盤加工

    machining on a lathe, where the part rotates and the tool cuts its outside or inside diameter

    Turning is the main process for making pins and shafts.

    旋削は、ピンやシャフトを製造する際の主要な加工工程である。

    Leave 0.3 mm on the diameter for finish turning.

  7. 7

    milling(noun)

    /ˈmɪlɪŋ/

    フライス加工, フライス削り

    machining in which a rotating cutter with several teeth removes material from a fixed workpiece

    The slots are cut by milling after the part is turned.

    溝は、部品を旋削した後にフライス加工で切削される。

    Our new five-axis milling centre can make complex shapes.

  8. 8

    reaming(noun)

    /ˈriːmɪŋ/

    リーマ加工, リーマ仕上げ

    finishing a drilled hole with a special tool to make it an exact size with a smooth surface

    The dowel holes need reaming to H7 after drilling.

    ノックピン穴は、穴あけ後にH7までリーマ加工する必要があります。

    Leave about 0.2 mm of material for reaming.

  9. 9

    grinding(noun)

    /ˈɡraɪndɪŋ/

    研削, 研削加工

    using a turning abrasive wheel to remove small amounts of material and give a very accurate, smooth finish

    After heat treatment, the bearing seats are finished by grinding.

    熱処理の後、軸受座は研削で仕上げられる。

    Surface grinding gives the plates a flatness within 5 microns.

  10. 10

    CNC(abbreviation)

    /ˌsiː en ˈsiː/

    CNC, コンピュータ数値制御

    computer numerical control: control of a machine tool by a computer program that sets tool movements and speeds

    We are hiring a CNC operator for the night shift.

    夜勤のCNCオペレーターを募集しています。

    The CNC program was checked on a simulator before the first cut.

  11. 11

    feed rate(noun)

    /ˈfiːd reɪt/

    送り速度, 送り

    the speed at which the cutting tool moves into or along the workpiece

    Reduce the feed rate if the tool starts to chatter.

    工具がびびり始めたら、送り速度を下げてください。

    A higher feed rate cut the cycle time by twenty percent.

  12. 12

    spindle speed(noun)

    /ˈspɪndl spiːd/

    主軸回転数, 主軸速度

    how fast the machine spindle turns, measured in revolutions per minute

    Set the spindle speed to 1200 rpm for this aluminium part.

    このアルミ部品には、主軸回転数を1200 rpmに設定してください。

    Too high a spindle speed will burn the drill.

  13. 13

    depth of cut(noun)

    /ˌdepθ əv ˈkʌt/

    切込み深さ, 切込み

    how deep the cutting tool goes into the material in one pass

    Use a depth of cut of 2 mm for roughing and 0.2 mm for finishing.

    切込み深さは、荒加工では2 mm、仕上げ加工では0.2 mmにしてください。

    The insert broke because the depth of cut was too large.

  14. 14

    chuck(noun)

    /tʃʌk/

    チャック, chuck

    the device with jaws on a lathe or drill that holds the workpiece or tool firmly while it turns

    Never leave the chuck key in the chuck.

    チャックハンドルをチャックに付けたままにしないでください。

    Thin parts can be crushed if the chuck pressure is too high.

  15. 15

    workpiece(noun)

    /ˈwɜːkpiːs/

    ワーク, 工作物, 被削材

    the piece of material or part that is being machined or worked on

    Make sure the workpiece is firmly clamped before starting the spindle.

    主軸を始動する前に、ワークがしっかりクランプされていることを確認してください。

    The workpiece moved slightly, so the hole was out of position.

  16. 16

    jig(noun)

    /dʒɪɡ/

    ジグ, 治具

    a device that holds a part and guides the tool, so the same operation can be repeated accurately

    A drill jig makes sure every hole is in the same place.

    ドリルジグを使えば、すべての穴を同じ位置にあけることができる。

    The welding jig holds the frame square while it is tacked.

  17. 17

    fixture(noun)

    /ˈfɪkstʃə(r)/

    フィクスチャ, 取付具, 固定具

    a device that holds and locates a workpiece firmly in the correct position on a machine

    We designed a fixture that holds four parts at once on the milling machine.

    フライス盤で一度に4個の部品を保持できる取付具を設計しました。

    Changing the fixture adds fifteen minutes to the setup time.