본문으로 건너뛰기

레슨 8/10 · 15단어 · 외운 단어 0

Measurement and inspection

측정과 검사

  1. 1

    accuracy(noun)

    /ˈækjərəsi/

    정확도, 정밀도

    how close a measurement or result is to the true or correct value

    The accuracy of the new machine is within 5 microns.

    신형 기계의 정확도는 5마이크론 이내입니다.

    Temperature changes can affect the accuracy of your measurements.

    유의어precisioncorrectnessexactnesstruthfulnessvalidityreliability
    반의어inaccuracyerrorimprecisionfalsenessincorrectness
  2. 2

    precision(noun)

    /prɪˈsɪʒn/

    정밀도, 정밀

    how close repeated measurements or results are to each other; also the quality of being very exact

    The company makes precision parts for medical devices.

    그 회사는 의료기기용 정밀 부품을 제조한다.

    Good precision means you get the same reading every time.

    유의어accuracyexactnessfinenesscarefulnessmeticulousness
    반의어imprecisioninaccuracycarelessnessvaguenessindefiniteness
  3. 3

    calibration(noun)

    /ˌkælɪˈbreɪʃn/

    교정, 검교정

    checking a measuring instrument against a known standard and adjusting it so its readings are correct

    This caliper is overdue for calibration, so do not use it.

    이 캘리퍼스는 교정 기한이 지났으니 사용하지 마십시오.

    Every gauge has a calibration label showing the next due date.

    유의어adjustmentstandardizationtuningcorrection
    반의어misalignmentinaccuracyerror
  4. 4

    vernier caliper(noun)

    /ˈvɜːniə ˌkælɪpə(r)/

    버니어 캘리퍼스, 노기스

    a sliding measuring tool with jaws, used to measure outside, inside and depth sizes accurately

    Measure the outside diameter with a vernier caliper.

    버니어 캘리퍼스로 외경을 측정하세요.

    A vernier caliper is accurate to about 0.02 millimetres.

  5. 5

    micrometer(noun)

    /maɪˈkrɒmɪtə(r)/

    마이크로미터

    a precise measuring tool with a screw mechanism, used to measure small sizes to 0.01 mm or better

    Use a micrometer to check the bearing seat diameter.

    마이크로미터로 베어링 시트의 직경을 확인하세요.

    Always zero the micrometer before you start measuring a part.

  6. 6

    dial indicator(noun)

    /ˈdaɪəl ɪndɪkeɪtə(r)/

    다이얼 게이지, 다이얼 인디케이터

    a measuring instrument with a needle and dial that shows very small movements, such as runout

    Check the shaft runout with a dial indicator on a magnetic base.

    자석 베이스에 설치한 다이얼 게이지로 축의 런아웃을 확인하세요.

    The dial indicator showed 0.05 mm of movement on the spindle.

  7. 7

    feeler gauge(noun)

    /ˈfiːlə ɡeɪdʒ/

    틈새 게이지, 필러 게이지

    a set of thin metal blades of exact thicknesses, used to measure small gaps

    Measure the gap between the coupling halves with a feeler gauge.

    틈새 게이지로 커플링 반쪽 사이의 간격을 측정하세요.

    The valve clearance is checked with a 0.2 mm feeler gauge.

  8. 8

    gauge block(noun)

    /ˈɡeɪdʒ blɒk/

    게이지 블록, 블록 게이지

    a very accurate steel or ceramic block of exact size, used as a reference to check measuring tools

    We check our micrometers against a gauge block every week.

    우리는 매주 게이지 블록으로 마이크로미터를 점검합니다.

    Handle gauge blocks with gloves to avoid rust from your fingers.

  9. 9

    go/no-go gauge(noun)

    /ˌɡəʊ nəʊ ˈɡəʊ ɡeɪdʒ/

    통과 정지 게이지, 한계 게이지

    a gauge with two ends that quickly shows whether a hole or thread is within its size limits

    Operators check every tapped hole with a go/no-go gauge.

    작업자들은 탭 구멍을 모두 통과 정지 게이지로 검사한다.

    If the no-go end enters the hole, the part is rejected.

  10. 10

    surface plate(noun)

    /ˈsɜːfɪs pleɪt/

    정반, 석정반

    a very flat granite or cast iron table used as a reference surface for measuring and marking out

    Place the part on the surface plate to check its flatness.

    평면도를 확인하려면 부품을 정반 위에 올려 놓으십시오.

    The granite surface plate is calibrated once a year.

  11. 11

    CMM(abbreviation)

    /ˌsiː em ˈem/

    3차원 측정기, 3차원 좌표측정기, CMM

    coordinate measuring machine: a machine with a probe that measures the exact 3D shape and size of parts

    The first part off the machine is measured on the CMM.

    기계에서 나온 첫 번째 부품은 3차원 측정기로 측정한다.

    The CMM report shows two holes out of position.

  12. 12

    first article inspection(noun)

    /ˌfɜːst ˈɑːtɪkl ɪnspekʃn/

    초도품 검사, 초물 검사

    a full check of the first part made in a new production run to confirm it meets the drawing

    Production cannot start until the first article inspection is approved.

    초도품 검사가 승인되기 전에는 양산을 시작할 수 없다.

    The customer asked for a first article inspection report with every new part.

  13. 13

    NDT(abbreviation)

    /ˌen diː ˈtiː/

    비파괴검사, NDT

    non-destructive testing: methods of checking materials and welds for hidden defects without damaging them

    All pressure welds must pass NDT before the vessel is painted.

    모든 압력 용접부는 용기를 도장하기 전에 비파괴검사를 통과해야 한다.

    An NDT technician will check the crane hook for cracks.

  14. 14

    ultrasonic testing(noun)

    /ˌʌltrəˈsɒnɪk testɪŋ/

    초음파 탐상검사, 초음파 검사

    an NDT method that sends high-frequency sound waves into metal to find cracks or measure thickness

    Ultrasonic testing found a crack inside the shaft.

    초음파 탐상검사로 축 내부의 균열을 발견했다.

    We use ultrasonic testing to measure the remaining wall thickness of pipes.

  15. 15

    dye penetrant testing(noun)

    /ˌdaɪ ˈpenɪtrənt testɪŋ/

    침투탐상검사, 염료침투검사

    an NDT method where a coloured liquid is put on a surface to show small cracks that reach the surface

    Dye penetrant testing showed a hairline crack at the weld toe.

    침투탐상검사에서 용접 토우부에 헤어라인 균열이 나타났다.

    Clean the surface well before dye penetrant testing.