ข้ามไปยังเนื้อหา

บทที่ 6/10 · 16 คำ · จำได้แล้ว 0

Concrete and reinforcement

คอนกรีตและเหล็กเสริม

  1. 1

    ready-mixed concrete(noun)

    /ˌredi mɪkst ˈkɒŋkriːt/

    คอนกรีตผสมเสร็จ

    concrete that is mixed at a batching plant and delivered to the site in mixer trucks, ready to use

    We ordered 250 cubic metres of ready-mixed concrete for Saturday.

    เราสั่งคอนกรีตผสมเสร็จ 250 ลูกบาศก์เมตรสำหรับวันเสาร์

    The ready-mixed concrete supplier must provide a delivery ticket for every truck.

  2. 2

    compressive strength(noun)

    /kəmˌpresɪv ˈstreŋθ/

    กำลังอัด, กำลังรับแรงอัดของคอนกรีต

    the ability of concrete to resist being crushed, usually tested on samples after 7 and 28 days

    The 28-day compressive strength of the column concrete must reach 40 MPa.

    กำลังอัดของคอนกรีตเสาที่อายุ 28 วันต้องได้ 40 MPa

    Low compressive strength results were found in two of the test cubes.

  3. 3

    slump test(noun)

    /ˈslʌmp ˌtest/

    การทดสอบการยุบตัวของคอนกรีต, การทดสอบสลัมป์

    a simple site test that measures how much fresh concrete sinks when a cone mould is lifted, showing its workability

    The site engineer rejected the truck because the slump test result was too high.

    วิศวกรหน้างานปฏิเสธรถคันนั้นเพราะผลการทดสอบการยุบตัวสูงเกินไป

    Do a slump test on every truck before pumping starts.

  4. 4

    water-cement ratio(noun)

    /ˌwɔːtə sɪˈment ˌreɪʃiəʊ/

    อัตราส่วนน้ำต่อซีเมนต์

    the weight of water divided by the weight of cement in a concrete mix, which strongly affects its strength

    Adding water on site increases the water-cement ratio and weakens the concrete.

    การเติมน้ำที่หน้างานทำให้อัตราส่วนน้ำต่อซีเมนต์สูงขึ้นและคอนกรีตอ่อนแอลง

    The mix design specifies a water-cement ratio of 0.45.

  5. 5

    admixture(noun)

    /ədˈmɪkstʃə(r)/

    สารผสมเพิ่มคอนกรีต, น้ำยาผสมคอนกรีต

    a chemical added to concrete in small amounts to change properties such as setting time or workability

    A retarding admixture was used because of the hot weather.

    มีการใช้สารผสมเพิ่มชนิดหน่วงการก่อตัวเนื่องจากอากาศร้อน

    The admixture dosage must follow the supplier's data sheet.

  6. 6

    formwork(noun)

    /ˈfɔːmwɜːk/

    แบบหล่อคอนกรีต, แบบหล่อ

    temporary moulds made of timber, plywood or steel that hold fresh concrete in shape until it hardens

    The formwork for the columns can be removed after 24 hours.

    แบบหล่อของเสาสามารถถอดได้หลังจาก 24 ชั่วโมง

    Check that the formwork is clean and oiled before pouring.

  7. 7

    shoring(noun)

    /ˈʃɔːrɪŋ/

    ค้ำยัน, เสาค้ำยัน, โครงค้ำยัน

    temporary props or frames that support formwork, slabs or excavation sides until they can support themselves

    The shoring under the transfer beam must stay for at least 28 days.

    ค้ำยันใต้คานทรานสเฟอร์ต้องคงไว้อย่างน้อย 28 วัน

    Steel shoring was installed to support the deep excavation walls.

  8. 8

    rebar(noun)

    /ˈriːbɑː(r)/

    เหล็กเสริมคอนกรีต, เหล็กเส้น

    steel bars placed inside concrete to make it strong enough to resist bending and pulling forces

    The rebar for the slab arrived cut and bent from the workshop.

    เหล็กเสริมสำหรับพื้นมาถึงแล้วโดยตัดและดัดมาจากโรงงาน

    Rusty rebar must be cleaned before it is placed.

  9. 9

    stirrup(noun)

    /ˈstɪrəp/

    เหล็กปลอก, เหล็กลูกฟูก

    a small closed loop of steel bar that holds the main bars of a beam or column in place and resists shear

    The stirrups near the column must be spaced at one hundred millimetres.

    เหล็กปลอกบริเวณใกล้เสาต้องมีระยะห่างหนึ่งร้อยมิลลิเมตร

    Several stirrups were missing at the beam ends, so the pour was stopped.

  10. 10

    lap splice(noun)

    /ˈlæp ˌsplaɪs/

    ระยะต่อทาบเหล็ก, การต่อทาบเหล็กเสริม

    the length where two reinforcement bars overlap so that force can pass from one bar to the other

    The lap splice for these bars must be at least forty times the bar diameter.

    ระยะต่อทาบของเหล็กเหล่านี้ต้องไม่น้อยกว่าสี่สิบเท่าของเส้นผ่านศูนย์กลางเหล็ก

    Do not place all lap splices at the same section of the beam.

  11. 11

    concrete cover(noun)

    /ˌkɒŋkriːt ˈkʌvə(r)/

    ระยะหุ้มคอนกรีต, ระยะหุ้มเหล็กเสริม

    the thickness of concrete between the surface and the nearest steel bar, which protects the steel from rust and fire

    Use plastic spacers to keep a concrete cover of 25 millimetres.

    ใช้ลูกปูนพลาสติกเพื่อรักษาระยะหุ้มคอนกรีตไว้ที่ 25 มิลลิเมตร

    Insufficient concrete cover led to rust stains on the balcony slab.

  12. 12

    bar bending schedule(noun)

    /ˌbɑː ˈbendɪŋ ˌʃedjuːl/

    ตารางแยกเหล็กเสริม, ตารางดัดเหล็ก

    a table listing every reinforcement bar with its mark, size, shape, length and number, used for cutting and bending

    The detailer sent the bar bending schedule for the third floor slab.

    ผู้ทำแบบขยายส่งตารางแยกเหล็กเสริมของพื้นชั้นสามมาให้

    Steel was ordered from the bar bending schedule to reduce waste.

  13. 13

    pour(verb)

    /pɔː(r)/

    เทคอนกรีต

    to place fresh concrete into formwork or a prepared area

    We plan to pour the fourth floor slab on Thursday night.

    เราวางแผนจะเทพื้นชั้นสี่ในคืนวันพฤหัสบดี

    Do not pour concrete in heavy rain without protection.

  14. 14

    curing(noun)

    /ˈkjʊərɪŋ/

    การบ่มคอนกรีต, การบ่ม

    keeping new concrete wet and at a suitable temperature for several days so that it gains full strength

    Curing must continue for at least seven days after the pour.

    ต้องบ่มคอนกรีตต่อเนื่องอย่างน้อยเจ็ดวันหลังการเท

    The slab cracked because curing started too late on a hot day.

  15. 15

    construction joint(noun)

    /kənˈstrʌkʃn ˌdʒɔɪnt/

    รอยต่อก่อสร้าง, ตะเข็บเทคอนกรีต

    a planned stopping point between two concrete pours, prepared so that the new concrete bonds well to the old

    The construction joint in the slab must be at one third of the span.

    รอยต่อก่อสร้างของพื้นต้องอยู่ที่หนึ่งในสามของช่วงพาด

    Clean and wet the construction joint before the next pour.

  16. 16

    honeycombing(noun)

    /ˈhʌnikəʊmɪŋ/

    คอนกรีตโพรงรังผึ้ง, รังผึ้ง

    a defect where the concrete surface has holes and exposed stones because it was not compacted properly

    Honeycombing was found at the base of three columns after the formwork was removed.

    พบรังผึ้งที่โคนเสาสามต้นหลังจากถอดแบบหล่อ

    Poor vibration is the main cause of honeycombing.